Aug 2021 BTO Analysis: Toh Guan Grove at Jurong East

Aug 2021 BTO Analysis: Toh Guan Grove at Jurong East

August 24, 2021

Located along Toh Guan Road, this Jurong East BTO launched in August 2021 is situated near an upcoming MRT station along the future Jurong-Region Line. We visited the site for Toh Guan Grove to check out its surroundings and to see what else this BTO has to offer.

t a glance

BTOToh Guan GroveLocationAlong Toh Guan RoadNo. of units569Unit types2-room Flexi, 3-, and 4-room flatsNo. of blocks3No. of floors10 to 37 storeysSite facilitiesRetail shops and a supermarketPublic transportationNearest MRTs: Toh Guan station on the Jurong Region Line (estimated completion by 2028 and ~5-min walk) and Jurong East Interchange (~14-min walk)
Buses: Bus stops are located on Toh Guan Road. Plenty of buses service this route taking you to areas like Bishan, Habourfront, Queenstown, Orchard, Bukit Timah and PioneerSurrounding amenitiesMalls: IMM, JEM, Westgate and Jcube (~11- to 17-min walk)
Hawker centre/Wet market: Yuhua Village Market and Food Centre (~14-min walk)
Other eateries: Coffee shops at blocks 267A, 282A and 286E Toh Guan Road, all surrounding the BTO
Parks: Located next to a PCN routeSchools within 1km (estimated)Fuhua Primary School, Yuhua Primary School, Bukit View Primary School, Jurong Primary School, Keming Primary School, LianHua Primary School and Princess Elizabeth Primary SchoolEstimated completion dateFirst quarter of 2026

The site

We headed down to the site during a weekend afternoon. Located away from the main roads, Toh Guan Grove sits in a relatively serene spot. However, because of the large number of public housing and coffee shops surrounding the site, we witnessed quite a high footfall.

Site for Toh Guan Grove BTO, taken from block 265.

Site for Toh Guan Grove BTO, taken from Toh Guan Road.

There are also quite a number of buses plying Toh Guan Road. This likely means that traffic will get quite busy along this road, especially during peak periods when the bus frequencies go up.

Toh Guan Road.

As mentioned before, we saw three coffee shops surrounding Toh Guan Grove alone so you will have plenty of options for dinner. One is located just opposite the site at block 286E, while the other is situated at 282A next to the roundabout adjacent to the site. The third is located at neighbouring block 267A.

Plenty of coffee shops surrounding the Toh Guan Grove BTO.

Within Toh Guan Grove, you will also see a supermarket and other retail shops. IMM is also less than a 15-min walk, so you will get access to other F&B and retail options as well as the Giant hypermarket. In terms of convenience, this BTO is pretty attractive.

This BTO will also see Toh Guan MRT station located just a 5-min walk away from it. The station will be on the future Jurong-Region Line (JRL) and is scheduled for completion in 2028 under the second phase of construction.

Toh Guan Grove BTO will be completed in 2026, so you will have about two years before you get to enjoy the new station. Once it’s up though, the station will be just one stop to Jurong East Interchange, which intersects with the North-South and East-West lines. For now, the Jurong East station is less than a 15-min walk away, but if you prefer not to walk, there are several buses along Toh Guan Road that take you to the station.

The area is also pretty convenient for drivers. Drivers will have to get through just a couple of traffic lights to hit major expressway PIE.

What unit should you go for at Toh Guan Grove?

Site Map for Toh Guan Grove BTO.

2-room flats

Unlikely to get afternoon sun: Stacks 275, 277, 321 and 323.

Best for privacy: Stacks 277 and 321.

Best for unblocked views: 279 and 281 (above 5th storey); 283; 317, 319, 321 and 323 (above 21st storey); 313, 315; 303 and 305 (above 5th storey).

Traffic noise: Avoid stacks 279, 281, 283, 285, 287 and 289 facing Toh Guan Road, which can get quite busy as this road leads to major expressways and also sees a high number of buses plying this route.

Noise from human activity: If you don’t want to be disturbed by a flurry of activity surrounding the retail shops and the supermarket on site, avoid stacks at Block 289A. On the plus side for the stacks in this block though is getting to those amenities really quickly. Stacks 313, 315, 317 and 319 are also facing the pavilion as well as the playground and fitness corners, which can get quite noisy because of the higher concentration of human activity.

Rubbish chutes: Avoid stack 287 and 289 located near the rubbish chutes and the bin centre.

3-room flats

Unlikely to get afternoon sun: Stacks 273, 297 and 325.

Best for unblocked views: The inward-looking stacks, 271, 273, 297 and 299. If you wish to go for stack 325, get a unit above the 21st floor since it’s looking towards block 284, which is 21 storeys high.

Away from human activity zones: Stack 325.

Near the lifts: Avoid stacks 271 and 297 if you don’t want your front door to be located near the lifts. Privacy is usually scant in these areas, since people waiting for the lifts tend to look into your units.

4-room flats

Unlikely to get afternoon sun: Stack 295.

Best for privacy: Stacks 293 and 309.

Best for unblocked views: 291 and 293 (above 5th storey); 301 (above 10th storey); 307 (above 21st storey); 309.

Noise from human activity: Avoid stacks 295 and 311 if you don’t want to be facing the pavilion, playgrounds and fitness corners. These areas have high concentration of human activity. Avoid stack 301 if you don’t want to be located near the bin centre or facing the service road behind the supermarket and shops where a lot of loading/unloading is going to take place.

Still have questions on BTO Toh Guan Grove? Let us know in the comments!

if(!gform){document.addEventListener(“gform_main_scripts_loaded”,function(){gform.scriptsLoaded=!0}),window.addEventListener(“DOMContentLoaded”,function(){gform.domLoaded=!0});var gform={domLoaded:!1,scriptsLoaded:!1,initializeOnLoaded:function(o){gform.domLoaded&&gform.scriptsLoaded?o():!gform.domLoaded&&gform.scriptsLoaded?window.addEventListener(“DOMContentLoaded”,o):document.addEventListener(“gform_main_scripts_loaded”,o)},hooks:{action:{},filter:{}},addAction:function(o,n,r,t){gform.addHook(“action”,o,n,r,t)},addFilter:function(o,n,r,t){gform.addHook(“filter”,o,n,r,t)},doAction:function(o){gform.doHook(“action”,o,arguments)},applyFilters:function(o){return gform.doHook(“filter”,o,arguments)},removeAction:function(o,n){gform.removeHook(“action”,o,n)},removeFilter:function(o,n,r){gform.removeHook(“filter”,o,n,r)},addHook:function(o,n,r,t,i){null==gform.hooks[o][n]&&(gform.hooks[o][n]=[]);var e=gform.hooks[o][n];null==i&&(i=n+”_”+e.length),null==t&&(t=10),gform.hooks[o][n].push({tag:i,callable:r,priority:t})},doHook:function(o,n,r){if(r=Array.prototype.slice.call(r,1),null!=gform.hooks[o][n]){var t,i=gform.hooks[o][n];i.sort(function(o,n){return o.priority-n.priority});for(var e=0;eComplete this form and we will recommend you a list of reputable interior design firms that fit your renovation requirements. It’s free! Note: This form is not applicable for repair works request.How many interior designers do you wish to get in touch with?3 – 55 – 8

My Property

My Property Type isHDBApartment/CondominiumPrivate HouseCommercialThe room type isPlease selectStudio2 Rooms3 Rooms4 Rooms5 RoomsAbove 5 RoomsProperty StatusNewResalePresently StayingKey Collection TimeYes, Key is collectedNo, in 1 – 3 months timeNo, in 3 – 6 months timeNo, in 7 – 12 months timeHave not purchase the unitProperty AddressUpload your Floor PlanAccepted file types: jpg, gif, png, pdf, ppt, jpeg, Max. file size: 2 MB.We recommend to attach your floor plan for a better estimate. File must less than 2MB.

Project Info

Area(s) you need to renovateLiving RoomDining RoomKitchenBedroomsBathroomsOthersWhole unitPreferred design styleNo PreferenceAsianClassicContemporaryEclecticIndustrialMediterraneanMidcenturyMinimalismModernRetroRusticScandinavianTraditionalTransitionalTropicalVictorianVintageMy project priority isPlease selectAesthetically Nice – I want good designCost effectiveness – I’m on a tight budgetMy renovation budget isPlease selectNot Fixed20,000 and Below20,001 – 30,00030,001 – 40,00040,001 – 60,00060,001 – 80,00080,001 – 100,000100,001 – 200,000200,001 & AboveDo you require renovation loan?Please selectYes, please call meNo. I don’tOther information?

My Contact Details

My name isFirstLastMy Email isYou can call me atHow Did You Get To Know Us?Please selectGoogleFacebookInstagramYahooEvents/RoadshowFriendsNewsletterRenoNation MagazineThe Straits TimesSME MagazineBingMSN Search

AgreementI acknowledge that the details provided in this form will be shared with Renonation.sg and the recommended interior design firms.AgreementI wish to receive home renovation inspiration, tips and guides from Renonation.sgNameThis field is for validation purposes and should be left unchanged.
gform.initializeOnLoaded( function() {gformInitSpinner( 5, ‘https://www.renonation.sg/wp-content/plugins/gravityforms/images/spinner.svg’ );jQuery(‘#gform_ajax_frame_5’).on(‘load’,function(){var contents = jQuery(this).contents().find(‘*’).html();var is_postback = contents.indexOf(‘GF_AJAX_POSTBACK’) >= 0;if(!is_postback){return;}var form_content = jQuery(this).contents().find(‘#gform_wrapper_5’);var is_confirmation = jQuery(this).contents().find(‘#gform_confirmation_wrapper_5’).length > 0;var is_redirect = contents.indexOf(‘gformRedirect(){‘) >= 0;var is_form = form_content.length > 0 && ! is_redirect && ! is_confirmation;var mt = parseInt(jQuery(‘html’).css(‘margin-top’), 10) + parseInt(jQuery(‘body’).css(‘margin-top’), 10) + 100;if(is_form){jQuery(‘#gform_wrapper_5’).html(form_content.html());if(form_content.hasClass(‘gform_validation_error’)){jQuery(‘#gform_wrapper_5’).addClass(‘gform_validation_error’);} else {jQuery(‘#gform_wrapper_5’).removeClass(‘gform_validation_error’);}setTimeout( function() { /* delay the scroll by 50 milliseconds to fix a bug in chrome */ jQuery(document).scrollTop(jQuery(‘#gform_wrapper_5’).offset().top – mt); }, 50 );if(window[‘gformInitDatepicker’]) {gformInitDatepicker();}if(window[‘gformInitPriceFields’]) {gformInitPriceFields();}var current_page = jQuery(‘#gform_source_page_number_5’).val();gformInitSpinner( 5, ‘https://www.renonation.sg/wp-content/plugins/gravityforms/images/spinner.svg’ );jQuery(document).trigger(‘gform_page_loaded’, [5, current_page]);window[‘gf_submitting_5’] = false;}else if(!is_redirect){var confirmation_content = jQuery(this).contents().find(‘.GF_AJAX_POSTBACK’).html();if(!confirmation_content){confirmation_content = contents;}setTimeout(function(){jQuery(‘#gform_wrapper_5’).replaceWith(confirmation_content);jQuery(document).scrollTop(jQuery(‘#gf_5’).offset().top – mt);jQuery(document).trigger(‘gform_confirmation_loaded’, [5]);window[‘gf_submitting_5’] = false;wp.a11y.speak(jQuery(‘#gform_confirmation_message_5’).text());}, 50);}else{jQuery(‘#gform_5’).append(contents);if(window[‘gformRedirect’]) {gformRedirect();}}jQuery(document).trigger(‘gform_post_render’, [5, current_page]);} );} );>

1950s wallpaper — 52 new designs from Bradbury & Bradbury

August 13, 2021

If you want to embrace a 1950s look in your mid century home, adding a splash (or more) of 1950s wallpaper is an important tool in your tool box. I’m always entranced with historic designs, so it’s exciting indeed to see Bradbury & Bradbury come out with this new collection of 1950s wallpapers. These are…

The post 1950s wallpaper — 52 new designs from Bradbury & Bradbury appeared first on Retro Renovation.

Did you miss our previous article…
https://www.amazingsidingstl.com/?p=464

The Detailed CWP Cabinetry Guide

August 13, 2021

Don Lake, the company’s founder, started it all in 1981 with the simple goal of providing excellent jobs to excellent people. Kevin and Caroline Gray, the current proprietors, maintain this concept by recruiting and training artisans enthusiastic about producing high-quality goods. To ensure that their customers have the best possible experience, CWP cabinetry dealers need hardworking and bright individuals to work in the store, central office, and showrooms.

Custom Wood Products is based in the Midwest and is established on a foundation of hard work, trust, and workers that take pleasure in producing the finest products available. At their 100,000-square-foot plant in St. Marys, Kansas, they are consistently implementing new technologies to improve their measurement and cutting processes for maximum accuracy. No one can do it better than their artisans when it comes to construction and assembly.

Define Your Style

With fully bespoke cabinets, you have complete design flexibility. Unique features, finishes, forms, and designs are available, in addition to custom sizes. Each client’s work is custom-made, making each order unique. Custom Wood Products combines the skills and workmanship of a traditional carpenter with the trustworthiness of a business that has shown it will stand behind its product for many years.

Make Your Dream A Reality

All approved Custom Wood Products designers have been chosen because they individually represent CWP’s ideals and have received specific training in kitchen and bath design, guaranteeing that customers enjoy the finest possible experience.

Lifetime Quality

For as long as you have your cabinetry, CWP backs it up with a lifetime guarantee. We can keep this guarantee because we take pleasure in utilizing high-quality components and constructing a high-quality product. We want our goods to last a lifetime, so you can be certain that if an issue arises, we will be there to help.

The CWP Process

Their professionally qualified designers will:

Work with you one-on-one to plan every aspect of your area.For a perfect fit, measure your area.They are accessible for consultation at any time throughout the process, from design to installation.

How To Choose The Best Cabinets From CWP Cabinetry

Your CWP cabinetry pro kitchen is essential. They are not only crucial in the overall dynamic of the space, but they are also vital to its function. Your cabinets keep your countertops and workstations tidy by offering enough storage space for your fantastic wine glass collection or even your extensive collection of cheese graters.

Choosing new cabinets may be difficult since selecting a design that won’t go out of style soon. CWP cabinetry pricing is one of the most significant expenditures you’ll make in your kitchen renovation, so you’ll want to be sure you’ll be pleased with them for many years to come.

Here is a quick rundown of all the things you should think about when you start looking for new kitchen cabinets:

Number Of Cabinets

The quantity of cabinets you choose is critical since it has a significant effect on the appearance and feel of your kitchen. Minimalist cabinets and open shelves have been popular in recent years. It’s essential to note that this is a fad and that minimalist cabinets and storage units may not be the best practical decision for your kitchen unless you have a stack of five Anthropologie plates and nothing else.

Similarly, cramming your kitchen with too many cupboards may make it seem cramped and crowded. Only having floor-to-ceiling cabinets on every side of the room is worse than not having any place to keep your kitchen items.

Material Selection

When there are so many designs to select from, how can you choose the appropriate materials for your kitchen? The first decision is whether you want to go with a traditional wood style or one of the more contemporary styles. Glass may be incorporated into your cabinets, or you can choose cabinets made of colored laminate.

You may also choose a style created from environmentally friendly materials. Cabinets constructed from recycled wood, salvaged wood, wood veneer, or even renewable wood like bamboo are examples of eco-friendly materials.

Shaker vs. Flat Panel vs. Inset

The design of your cabinet doors may or may not add to the function of your kitchen, but it will alter the dynamic of your space. Most individuals install three kinds of cabinets; however, if you want to stand out from the crowd, you also have additional choices.

The inset cabinet style is a timeless design that will stay fashionable and attractive for decades. It is, however, typically the most costly type to install. Because the cabinets have visible hinges, they must be properly sized and cut to be functional. Although they are pricey, their worth is evident when you are still receiving compliments on them after 20 years.

Shaker-style cabinet doors are a tried and proven design that fits into nearly any house if you want to opt for a traditional appearance. These cabinet doors are the most popular in today’s kitchens. The design’s clean lines and simplicity make it a great addition to virtually any kitchen since it goes with everything. Shaker cabinets may be used to create virtually any design, whether you want to go contemporary or go back to a farmhouse-style kitchen.

In contemporary ultra-modern kitchens, flat-panel cabinets have become the go-to cabinet design. They have a clean, modern appearance that is ideal for a futuristic or contemporary aesthetic. The flat panel design is available in both wood and laminate. This design is especially attractive since, depending on your budget, you can transform it from an IKEA showroom appearance to an ultra-high-end one. CWP Euro full access cabinetry is also perfect!

Hardware Selection

As if picking the correct quantity, material, and style of cabinets weren’t difficult enough; you also had to choose the right hardware to go with them. These accent elements, believe it or not, make a significant contribution to the overall design of your cabinets.

Choosing hardware with design elements that are similar to your cabinets is a solid rule of thumb. For example, if you’ve selected flat-panel cabinets for a contemporary kitchen, you’ll want to choose complementary hardware that matches your cabinets’ minimalist and clean appearance.

When you sum everything up, there are many factors to consider when designing your new kitchen cabinets. However, being the most costly component of your project and the main point of your kitchen, your cabinets demand your time and attention. If your designers are color-blind, seek the assistance of a reputable cabinet builder or kitchen specialist, who makes it their job to determine which drawer pulls match best with which cabinet color.

Making The Most Of CWP Cabinetry: Other Factors To Consider

Cabinets are essential components in kitchen design since they are typically one of the main focus points of the room. There are many different designs of kitchen cabinets on the market that it may be difficult to choose the right one for your home. Any homeowner would like to make the best decision for their kitchen and avoid purchasing kitchen cabinets that do not complement the area or are insufficiently practical. If you’re not sure what kind of kitchen cabinets you want for your area, it’s simple to make a mistake. How can you choose the perfect kitchen cabinets to improve the looks of your kitchen, offer the practical features you want, and inspire you to embark on a kitchen remodeling project? Take a look at these four helpful hints for selecting the best kitchen cabinets for your house.

Keep The Kitchen Style In Mind

Traditional, contemporary, and transitional are popular kitchen styles, but within those categories, there are many distinct subtypes. You should choose complementary cabinets that suit the design of your kitchen. The color palette of your kitchen should be reflected in the cabinets you choose. Consider how the cabinet doors will go in with the rest of your kitchen’s decor. The layout of your kitchen and the amount of space available are other variables to consider. Kitchens with limited space benefit from space-saving cabinetry. Euro cabinetry by CWP custom wood products can be customized based on your preferences.

Choose The Best Material

While you want all of your kitchen design components to flow together, your personal requirements should be your guide when selecting the right cabinet material. Kitchen cabinets come in a variety of materials, with wood and wood-like materials being the most common. You may select from hardwood, fiberboard, plywood, stainless steel, metal, melamine, or thermofoil, among other options. Hardwood is generally the finest choice if you want a high-quality cabinet material. The substance used in particleboard is usually of inferior grade.

Cabinet Design Shouldn’t Be Overlooked

When purchasing new cabinets, the doors get a lot of attention. They come in a wide variety of finishes, designs, and colors. Before choosing a cabinet design, consider the overall aesthetic of your kitchen and perhaps your whole home. Unless you want to create something unique and eccentric, the general style of your kitchen area and the cabinets should complement each other. Because of its classic, basic, and practical qualities, Shaker design kitchen cabinets are a popular option. They are also quite adaptable and may be used in both classic and contemporary kitchens.

im For Aesthetics And Functionality

You want your kitchen cabinets to appear nice while still providing the functionality you need. As a result, beauty and practicality are important considerations when choosing cabinets. Whether your kitchen is big or little, the finest cabinets will improve the appearance and feel of your room while also providing practical value. Design/style, color, finish, and even hardware are all aspects of aesthetics. You may pick between conventional cabinets with handles and sleek handleless cabinets. Think storage and organizing when it comes to functionality. All of your belongings should fit neatly into your cabinets in a manner that is both clutter-free and appealing to you.

If you approach it correctly, selecting the perfect kitchen cabinets may be a snap. Consider the design of your kitchen, the cabinet material, the desired cabinet style, as well as the aesthetics and usefulness. Consult our experts right away if you’re uncertain how to continue! You can also check CWP cabinetry reviews for your peace of mind.

.fusion-fullwidth.fusion-builder-row-2 { overflow:visible; }

The post The Detailed CWP Cabinetry Guide appeared first on Luxury Home Remodeling | Sebring Design Build.

Did you miss our previous article…
https://www.amazingsidingstl.com/?p=459

Aug 2021 BTO Analysis: Queen’s Arc

August 13, 2021

One of the seven BTOs launched for Aug 2021, Queen’s Arc at Queenstown may not be located next to an MRT station, but it is surrounded by a slew of F&B options and is within a short walking distance to IKEA Alexandra. If you are making a flat selection in this development, we consider what your best options are.

t a glance

BTOQueen’s ArcLocationAlong Queensway. Bounded by Queen’s Crescent (future road) and Queensway Drive (future road)No. of units610Unit types3- and 4-room flatsNo. of blocks2 + 1 (block of rental flats)No. of floors23 to 39 storeysSite facilitiesA community hub comprising a childcare centre, an eating house, a minimart, and other shops.Public transportationNearest MRT: Queenstown MRT station (~13 min walk)
Buses: Bus stops along Queensway with plenty of buses that take you to areas like Clementi, Jurong East, City Hall, Bugis, Woodlands, Clarke Quay, Serangoon, Marina Bay and Bedok.Surrounding amenitiesRetail, F&B: Queensway Shopping Centre (~4 min walk)

Anchorpoint Shopping Centre (~6 min walk)

IKEA Alexandra (~6 min walk)

Alexandra Central (~6 min walk)
Hawker Centres: Alexandra Village Food Centre (~5 min walk)

ABC Brickworks Market & Food Centre (~7 min walk)
Parks: Proximity to Rail Corridor and HortParkSchools within 2km (estimated)Queenstown Primary School, Blangah Rise Primary School, Gan Eng Seng Primary School, New Town Primary SchoolEstimated completion date3rd quarter of 2027

The site

Queen’s Arc Site

The surrounds of the BTO site were bustling during our site visit. Traffic was heavy along Queensway in the afternoon and will likely become busier with the expansion of Alexandra Hospital on the adjacent site beside Queen’s Arc. The redevelopment for the hospital is scheduled for completion in 2030.

Alexandra Hospital’s expansion. The site will sit adjacent to Queen’s Arc BTO.

Image: The Straits Times

While the BTO isn’t located next to an MRT station—Queenstown MRT on the East-West line is situated more than a 10-min walk away—there are a lot of buses (around 11!) that service the bus stops along Queensway in front of the BTO. These can take you to the CBD and most major neighbourhoods in Singapore.

There are no big shopping malls nearby, but you do get IKEA Alexandra within a short walking distance away. In terms of food options, you have the option of hawker fare at popular hawker centres Alexandra Village and ABC Brickworks as well as fast food eateries and restaurants located at Alexandra Central and Anchorpoint Shopping Centre. The Queen’s Arc site itself will also see a coffee shop.

For supermarkets, the nearest ones are at NTUC Fairprice along Stirling Road and the Cold Storage within Anchorpoint Shopping Centre. Within the BTO site, there will be a minimart as well.

Which unit should you pick for Queen’s Arc?

3-room flats

Most of the stacks here are 4-room units. If you are thinking of getting a 3-room flat, you only have stacks 129 and 131 to choose from. There isn’t a huge difference in these two stacks.

Both stacks are likely to get some afternoon sun, coming in from the northwest direction from March to September. The consolation is that because they are north-south facing, you are likely to experience some decent breeze.

The 3-room stacks are also facing the drop-off point, so you will want to avoid units on the lower floors if you don’t want to be disturbed by drop-off activities e.g. loading and unloading of goods, passenger pick-ups, etc.

The stacks are located relatively near the lifts. Consider investing in privacy screens near your front entrance to maintain more privacy in your apartment.

4-room flats

Afternoon sun: For 4-room stacks, stacks 105, 107, 133 and 135 are the ones to consider if you want to get less of the afternoon sun. Both these stacks will get some afternoon sun coming from the southwest direction from September to March, but the heat will be slightly alleviated as they are partially blocked by the stack before them.

Sun direction in April

Sun direction in October

Privacy: If you don’t want neighbours looking in through your front door when they walk by, look to stacks 107, 113, 127 and 133. However, depending on the design of the BTO, they might be able to see through your service yard as they walk along the common corridors. Check HDB’s 3D model for Queen’s Arc for more information.

Traffic noise: Traffic noise is likely going to a problem for stacks 101, 103, 117 and 119, which are facing a road junction and arterial road Queensway.

Queensway is a busy arterial road

Car park: Don’t want to be subjected to fumes and the revving of engines? Avoid stacks near the car park if you are picking a unit on the lower floors (the car park has 6 storeys). Stacks 135 and 137 have their service yards looking into the car park, while stacks 105, 107, 109 and 111 have the main areas of the home looking into the car park.

Human activity zones: Because of the higher concentration of human activity in zones like the pavilions, playgrounds and fitness corners, you are likely going to get some noise disturbance if your stack is facing them. These are the stacks most likely affected: 109, 111, 121, 123, 133, 135, 137 and 139.

If you have any other questions on BTO Queen’s Arc, hit us up on our socials or in the comments below!

My Property

Project Info

My Contact Details

AgreementI acknowledge that the details provided in this form will be shared with Renonation.sg and the recommended interior design firms.AgreementI wish to receive home renovation inspiration, tips and guides from Renonation.sgEmailThis field is for validation purposes and should be left unchanged.
gform.initializeOnLoaded( function() {gformInitSpinner( 5, ‘https://www.renonation.sg/wp-content/plugins/gravityforms/images/spinner.svg’ );jQuery(‘#gform_ajax_frame_5’).on(‘load’,function(){var contents = jQuery(this).contents().find(‘*’).html();var is_postback = contents.indexOf(‘GF_AJAX_POSTBACK’) >= 0;if(!is_postback){return;}var form_content = jQuery(this).contents().find(‘#gform_wrapper_5’);var is_confirmation = jQuery(this).contents().find(‘#gform_confirmation_wrapper_5’).length > 0;var is_redirect = contents.indexOf(‘gformRedirect(){‘) >= 0;var is_form = form_content.length > 0 && ! is_redirect && ! is_confirmation;var mt = parseInt(jQuery(‘html’).css(‘margin-top’), 10) + parseInt(jQuery(‘body’).css(‘margin-top’), 10) + 100;if(is_form){jQuery(‘#gform_wrapper_5’).html(form_content.html());if(form_content.hasClass(‘gform_validation_error’)){jQuery(‘#gform_wrapper_5’).addClass(‘gform_validation_error’);} else {jQuery(‘#gform_wrapper_5’).removeClass(‘gform_validation_error’);}setTimeout( function() { /* delay the scroll by 50 milliseconds to fix a bug in chrome */ jQuery(document).scrollTop(jQuery(‘#gform_wrapper_5’).offset().top – mt); }, 50 );if(window[‘gformInitDatepicker’]) {gformInitDatepicker();}if(window[‘gformInitPriceFields’]) {gformInitPriceFields();}var current_page = jQuery(‘#gform_source_page_number_5’).val();gformInitSpinner( 5, ‘https://www.renonation.sg/wp-content/plugins/gravityforms/images/spinner.svg’ );jQuery(document).trigger(‘gform_page_loaded’, [5, current_page]);window[‘gf_submitting_5’] = false;}else if(!is_redirect){var confirmation_content = jQuery(this).contents().find(‘.GF_AJAX_POSTBACK’).html();if(!confirmation_content){confirmation_content = contents;}setTimeout(function(){jQuery(‘#gform_wrapper_5’).replaceWith(confirmation_content);jQuery(document).scrollTop(jQuery(‘#gf_5’).offset().top – mt);jQuery(document).trigger(‘gform_confirmation_loaded’, [5]);window[‘gf_submitting_5’] = false;wp.a11y.speak(jQuery(‘#gform_confirmation_message_5’).text());}, 50);}else{jQuery(‘#gform_5’).append(contents);if(window[‘gformRedirect’]) {gformRedirect();}}jQuery(document).trigger(‘gform_post_render’, [5, current_page]);} );} );>

Did you miss our previous article…
https://www.amazingsidingstl.com/?p=444

7 Best Bolt Cutters [2021 Reviews]

August 11, 2021

Featured Image: Outlet Shops

Bolt cutters are very useful. A bolt cutter, contrary to its name, does not have to be used only for cutting through bolts; it is a multi-purpose tool that may be utilized in a variety of circumstances. Power tools, on the other hand, are just as fast and need less effort to use. But consider the issue of safety. Power tools are often much too aggressive, and even a little mishap may have severe consequences. Don’t forget that they’re worthless without a source of power. That is why you should get a quality pair of bolt cutters.

Of course, they’re excellent for cutting bolts, as the name suggests. This is a fantastic function for a variety of occasions. The strong jaws, on the other hand, may be used for a range of tasks, including cutting solid core wire, metal shelving, & even steel straps used to hold cargo on pallets. Whatever you want to do with your bolt cutter, make sure you choose one with excellent grips that provide control and leverage. Bolt cutters are also required to make difficult cutting tasks simple.

.fusion-fullwidth.fusion-builder-row-1 { overflow:visible; }1.>Sale

TEKTON 36 Inch Bolt Cutter | 3421 Drop forged hardened alloy steel jawsCompound cutting action requires less effortTubular steel handles with cushioned non-slip rubber gripsCuts bolts, chain, threaded rod, and more up to 1/2 in. diameterCheck Price Below

Buy on Amazon>

2.>Sale

KNIPEX – 71 01 200 Tools – CoBolt Compact Bolt Cutter (7101200), 8-Inch Precision Grade Performance ToolsThe Number 1 Choice Of Tradesman WorldwideComfortable In Use And Quality Assured DesignFit To Match The Needs In The Shop, At Home Or In The Service FieldEach Tool Is Proven And Tested For Durability And Function In Real World Use And ConditionsCheck Price Below

Buy on Amazon>

3.>

WORKPRO W017007A Bolt Cutter, Bi-Material Handle with Soft Rubber Grip, 30″, Chrome Molybdenum Steel Blade Drop forged chrome molybdenum steel and powder coated jaws for sure, efficient cutting and long lifeClassic lever-fulcrum design and precisely aligned blades deliver added leverage with less effortErgonomic bi-material Anti-slip grips provide greater control and comfort in cuttingCutting Capacity: HRC≤42: 25/64-inch(10mm Maximum)；HRCIdeal for cutting soft metal, bolts, rods, rivets and chainCheck Price Below

Buy on Amazon>

4.>

Neiko 00563A Heavy Duty Bolt Cutter, 36-Inch, Chrome Molybdenum Steel Blade CHROME MOLY STEEL: 36-inch premium Cr-Mo steel jaws cut through harder objects than chrome vanadium steel bolt cuttersDURABLE BLADES: High-frequency, heat treated blades resist damage and dents in tough applicationsMORE POWER, LESS EFFORT: Classic lever-fulcrum design and precisely aligned blades deliver added leverage with less effortERGONOMICAL HANDLES: Angled non-slip plastic, textured grips provide greater control and comfort in cuttingHEAVY DUTY: Cuts the toughest bolts, chains, padlocks, threaded rods, wires and many other metalsCheck Price Below

Buy on Amazon>

5.>

Olympia Tools Power Grip Bolt Cutter, 39-14, 42 Inches (39-142) BOLT CUTTER: The heat-treated & drop-forged alloy steel jaws are ideal for cutting hard & soft metals with ease. The 42-inch long handles & compound hinges help maximize leverage & cutting force.HIGH QUALITY: Patented folding handles allow bolt cutters to easily fit in a bag. Ergonomic comfort grips and heavy-duty cutting strength. Extra-wide handles significantly reduce pressure on the hands.MADE TO LAST: Our durable and long-lasting tools help you with home, garage & industrial projects. With professional-grade quality, easily repair & fix issues with our tool cabinet essentials.THE RIGHT TOOL FOR THE JOB: We engineer a range of bolt cutters, clamps, chisels, folding carts, hammers, pliers, saws, screwdrivers, tape measures, utility knives, vises, bolt cutters, saws & wrenches.SUPERIOR INSTRUMENTS: Olympia Tools provides quality & innovative hand & specialty tools, tool accessories & outdoor equipment for construction, woodworking, mechanical maintenance & home repair.Check Price Below

Buy on Amazon>

6.>Sale

GreatNeck BC36 36 Inch Bolt Cutters | Cuts Bolt, Nails, Locks, Rivets, Chains, & Wire | 1/2 Inch Jaw Capacity | Forged S2 Steel Construction for Durability & Powerful Cutting Edge | Orange Body DURABLE MATERIALS: These wire cutters have forged S2 steel construction for maximum cutting powerCUTS THROUGH ANYTHING: Whether it’s chain, bolts, wires, rods, and more, these cutters can get the job donePROTECTED BY: If something happens to your bolt cutters during normal, everyday use, then it should be covered by the GreatNeck Limited Lifetime warranty. Read the product manual for warranty conditions and restrictionsCOMFORTABLE GRIP: These heavy duty bolt cutters also have a comfortable, ergonomic grip handlesEASY IDENTIFICATION: These rod cutters have a vibrant orange body and the GreatNeck logo for easy identification in your massive tool collectionCheck Price Below

Buy on Amazon>

Ridgid and its bolt cutters are fairly expensive in comparison to most other types of bolt cutters on the market, but they still offer a fantastic heavy-duty choice.

The Ridgid 14288 bolt cutter is a premium choice with a respectable size of 31 inches that provides a good mix of leverage and mobility. It’s a fantastic heavy-duty choice since it has a cutting capability of 1/2 inch.

.fusion-content-boxes-7 .fusion-content-box-hover .heading-link:hover .icon i.circle-yes,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-box:hover .heading-link .icon i.circle-yes,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon i.circle-yes,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-box-hover .heading .icon i.circle-yes {
background-color: #65bc7b !important;
border-color: #65bc7b !important;>

dvantages Of Bolt Cutters

Quick and to the point. Have you ever had trouble cutting through a rusty or heavy lock? A lock cutter can cut through almost any kind of lock, regardless of how long it’s been hanging on a gate, door, storage container, or other objects. You can swiftly and easily cut through locks, operating fast and effectively with minimal trouble or resistance. They can snap a lock-off in seconds by increasing the strain on it.

It’s very safe to use. Power tools that claim to be able to break locks may put you at grave risk. Although they seem to be strong and quick-working alternatives to bolt cutters, they may be more difficult to manage and less effective. They also have the potential to send components flying or cause errors. Bolt cutters, on the other hand, only cut what they can fit within their jaws. There is no recoil or bounce back and no components that might cut you or injure you in any way.

Removes the need for effort. To use a bolt cutter, you don’t require a lot of physical strength or individual effort. You can break even the toughest locks with only a little arm power and a smooth, quick stroke. The strength of a bolt cutter enables you to achieve more with less effort, making the difficult task of lock cutting simpler and less taxing. Mechanical power and pressure will be on your side.

It does not require any cleaning. If you’ve ever tried to cut a lock with a hand or power tool, you know how dirty the procedure can be. Before the work is officially done, these tools leave behind shavings and a plethora of little bits and pieces to clean up. Bolt cutters, on the other hand, leave no trace. They just break a lock at a certain point, leaving you with nothing but the lock to deal with.

Kinds Of Bolt Cutters

Traditional

Traditional bolt cutters have all of the design features you’d expect to see. They don’t have any design features that they don’t require, yet they nevertheless get the job done. This category takes up the majority of our list. Even tiny or compact versions fit into this category since they have the same design but are smaller.

Foldable

Bolt cutters may be difficult to store. Therefore, some versions come with folding handles. To reduce their total length, the handles fold upward onto the jaws. Although they are broader, as a result, they are still small enough to fit in most toolboxes and backpacks. Because the handles are mainly solid materials, the integrity is only minimally compromised. The only exception is a space between them that enables them to fold. Folding bolt cutters are great if you need this functionality.

Extendable

Bolt cutters with extended handles are available, but none are on our list. For usage in confined areas, the handles may be left at their smallest length since they are considerably simpler to manage in this form. The handles, on the other hand, maybe lengthened to improve the mechanical advantage. The main issue with this design is that they may lack structural strength since the handles are hollow.

Characteristics Of Bolt Cutters

Highly Durable & High-Strength

If you want to purchase the best bolt cutters, make sure you choose a device that is high-strength and designed to last. Bolt cutters depend on force to function properly and efficiently, so if yours can’t take a lot of force or fail when confronted with powerful locks, they won’t be able to fulfill your requirements. From the cutting jaws to the grips, look for a bolt cutter that is constructed of sturdy materials.

Weight And Size

Bolt cutters are available in a variety of sizes and weights. And these two characteristics may make one bolt cutter more suitable for your requirements than others. When it comes to size, the handle length is important to consider. Longer handles (or arms) equal greater leverage. Thus, a bolt cutter with a 24-inch handle will provide more force than one with an 18-inch handle. Bolt cutters with longer handles can cut through tougher materials and metals. The larger and more difficult the locks you’ll be dealing with, the larger your bolt cutter will need to be.

A bolt cutter’s weight also affects its mobility and may affect its force. Bolt cutters that are lightweight are simpler to use and carry with you at all times. For extra-tough locks, however, stronger bolt cutters are the best option. Bolt cutters may weigh as little as two pounds or as much as eight pounds or more.

Opening Of The Jaw

This is a characteristic that you must not overlook. The bolt cutter’s jaw opening has a direct impact on how and what it may be used for. It can only operate on thinner locks if the opening is narrow or tiny. You’ll have greater flexibility if the opening is fairly large. Bolt cutters have a 5/16-inch jaw opening as standard. Anything smaller will work better for cutting wire or thin metal sheets. However, if you’re dealing with extra-tough locks, you may need a bigger opening.

Other Things to Think About

Grips that are easy to hold. The design of the grip is critical to the operation. Because you’ll be applying a lot of force, you’ll want something that’s both comfortable in your palm and easy to grasp onto. While it shouldn’t be the primary consideration when choosing a bolt cutter, it is something to keep in mind.

Design that can be folded. If you must carry bolt cutters in a tool bag, you should get a set made specifically for that purpose. This is particularly true if you anticipate the need for longer handles to gain a mechanical advantage. Because this isn’t a common design element, you’ll have to look for sets that include it explicitly.

Blade that can be adjusted. The blade of most bolt cutters may be adjusted. You may fine-tune performance by setting the appropriate cutting depth with this adjustment. This modification may be done in a variety of ways, so pay attention to how it’s done. You want to make sure the process is both simple to use and produces consistent outcomes.

Angle or Cutting Style. If you believe that all bolt cutters cut the same way, it’s time to take a closer look at the ones you’re considering purchasing. Various cut styles, or angles, are used by bolt cutters, resulting in different end outcomes. Bolt cutters come in angled, shear, clipper, and center cut styles. Each of these cuts has an impact on how your bolt cutter is positioned, how much pressure is given to one spot, and how the jaws open.

Hydraulic or hand-powered options are available. The majority of bolt cutters are driven only by the force exerted by the user via the handles. You may, however, use a hydraulic bolt cutter if you want. A hydraulic piston drives the cutting blades of these tools, which are powered by a motor. The blades are moved with greater force by the piston, which is more than hand- and handle-operated bolt cutters can provide. If you’re attempting to cut through thicker locks, hydraulic bolt cutters come in handy.

Conclusion:

The TEKTON Bolt Cutter is the clear winner.

The compound hinge delivery mechanism drives the drop-forged and hardened alloy steel jaws, which produce a powerful punch.

While there is no exact poundage information on these cutters, the results speak for themselves.

The cutting head carries almost all of the weight, and you’ll find yourself cutting through a variety of heavy-duty materials with hardly a squeak from the Tektons.

Furthermore, under pressure, the robust, high-leverage tubular steel handles will not twist or yield.

The degree of comfort is just what you’d expect. The soft rubber grips provide excellent control and are comfortable to hold.

The jaws are also interchangeable and adjustable.

To view our Amazon Associates Disclaimer, please click here.

The post 7 Best Bolt Cutters [2021 Reviews] appeared first on Luxury Home Remodeling | Sebring Design Build.

Did you miss our previous article…
https://www.amazingsidingstl.com/?p=434

7 Cosiest Singapore Homes in Neutral Colours

August 11, 2021

Who doesn’t want a cosy home? And there’s no easier way to get the warm fuzzies than with soothing, neutral colours. Think light wood tones, warm white shades and natural materials like linen and rattan. Renovated recently, these homes in Singapore are some of the cosiest out there. Feel the calm and embrace the warmth as you enter these comfort zones:

1. Wooden screens and many other things

This home’s theme? Adaptability. Wood-framed screens are used to demarcate the different spaces. Some are sliding, which opens up a million different possibilities in the use of the space when they are left opened. Others are fixed in place to function as a privacy screen as much as a design element.

Still others are combined with glass panels so light still gets to filter through. While the wooden screen for the bedroom is lined with cream laminates to look just like shoji, a Japanese paper screen. It provides enough privacy, while still allowing the space to feel light and airy.

Design: Chalk Architects

2. Contrasting dark and light

Rather than go with a single wood tone, this BTO at Dawson decides to juxtapose light and dark wood shades. It creates a lovely visual contrast, without taking away the warmth of the space. To create a splash of modernity, terrazzo elements (seen in the home bar and foyer) were added to the space.

The bedroom features a darker, subdued palette, in contrast with the communal spaces’ lighter, medium-toned woods. Lines from the carpentry and furniture are kept simple, with gentle curves accentuating the Zen-like atmosphere.

Design: Parenthesis Studio

3. Embracing the Scandinavian design

We never tire of the Scandinavian style, especially if it’s done on point like in this resale apartment. Like with many Scandinavian themed homes, it adopted a white and wood scheme with the use of light grey accents and patterns to enliven things up.

An open plan creates an easy breezy vibe, which is further boosted by the generous amount of windows lining across the living and dining spaces. A large, hardworking island is the entirety of the kitchen, as it packs a sink, an induction cooker, storage and a recessed legroom for a couple of counter chairs.

Design: In-Expat

4. Curve intentions

There are perhaps more curves than lines in this flat. You see them in the doors/doorways, furnishings, the carpentry work and even at the edges of columns and ceiling beams. They present a quirky vibe, while offering a gentler, more soothing milieu. We can definitely get on board with this.

Most of the home is decked out in non-standard neutrals, with blush, taupe and navy blue functioning as such. Only the common bathroom ceiling sees a burst of dark red, which almost feels like a dare but works exceptionally well in that small space.

Design: Three-D Conceptwerke

5. So much wood

Much of this condominium apartment features wood tones, whether crafted from real wood or wood-lookalikes. Walls and entrances are covered in wood laminates, while wooden furnishings and furniture were used. Even the bathroom is clad in wood grain tiles. It creates a visual simplicity, lending a sense of calm and uniformity to the space.

The use of wood also brings in a sense of the outdoors—and with it a sense of serenity—which is further enhanced through the use of plants, natural materials like rattan and the cement screed, stone-like TV wall.

Design: Hock Hoon

6. Myriad textures and nuances

Warm hues pop against a black-and-white setting in this eclectic flat that features a colonial slant juxtaposed with modern Mid-century elements. The use of rattan, in keeping with the theme, also invites a sense of cosiness to the space.

The highlight of the home has to be the home bar that takes centre stage in the living room. Above, a ceiling-hung rack provides room for plants and storage for liqueurs and spirits.

Design: Fifth Avenue Interior

7. All framed up

Our final home features a clean and bright palette with a whitewashed base accented with grey-hued woods. Another Scandinavian design done right. A chevron-patterned backsplash—a classic Nordic motif—stands out against the large, eat-in white kitchen.

Black-framed prints and photos adorn the walls, mirroring the eye-catching black-framed glass divider that segregates the dining area from the rest of the home. The curved elements seemingly hug the eating space, creating a cosy gathering spot for friends and family.

Design: Lemonfridge Studio

My Property

Project Info

My Contact Details

AgreementI acknowledge that the details provided in this form will be shared with Renonation.sg and the recommended interior design firms.AgreementI wish to receive home renovation inspiration, tips and guides from Renonation.sgPhoneThis field is for validation purposes and should be left unchanged.
gform.initializeOnLoaded( function() {gformInitSpinner( 5, ‘https://www.renonation.sg/wp-content/plugins/gravityforms/images/spinner.svg’ );jQuery(‘#gform_ajax_frame_5’).on(‘load’,function(){var contents = jQuery(this).contents().find(‘*’).html();var is_postback = contents.indexOf(‘GF_AJAX_POSTBACK’) >= 0;if(!is_postback){return;}var form_content = jQuery(this).contents().find(‘#gform_wrapper_5’);var is_confirmation = jQuery(this).contents().find(‘#gform_confirmation_wrapper_5’).length > 0;var is_redirect = contents.indexOf(‘gformRedirect(){‘) >= 0;var is_form = form_content.length > 0 && ! is_redirect && ! is_confirmation;var mt = parseInt(jQuery(‘html’).css(‘margin-top’), 10) + parseInt(jQuery(‘body’).css(‘margin-top’), 10) + 100;if(is_form){jQuery(‘#gform_wrapper_5’).html(form_content.html());if(form_content.hasClass(‘gform_validation_error’)){jQuery(‘#gform_wrapper_5’).addClass(‘gform_validation_error’);} else {jQuery(‘#gform_wrapper_5’).removeClass(‘gform_validation_error’);}setTimeout( function() { /* delay the scroll by 50 milliseconds to fix a bug in chrome */ jQuery(document).scrollTop(jQuery(‘#gform_wrapper_5’).offset().top – mt); }, 50 );if(window[‘gformInitDatepicker’]) {gformInitDatepicker();}if(window[‘gformInitPriceFields’]) {gformInitPriceFields();}var current_page = jQuery(‘#gform_source_page_number_5’).val();gformInitSpinner( 5, ‘https://www.renonation.sg/wp-content/plugins/gravityforms/images/spinner.svg’ );jQuery(document).trigger(‘gform_page_loaded’, [5, current_page]);window[‘gf_submitting_5’] = false;}else if(!is_redirect){var confirmation_content = jQuery(this).contents().find(‘.GF_AJAX_POSTBACK’).html();if(!confirmation_content){confirmation_content = contents;}setTimeout(function(){jQuery(‘#gform_wrapper_5’).replaceWith(confirmation_content);jQuery(document).scrollTop(jQuery(‘#gf_5’).offset().top – mt);jQuery(document).trigger(‘gform_confirmation_loaded’, [5]);window[‘gf_submitting_5’] = false;wp.a11y.speak(jQuery(‘#gform_confirmation_message_5’).text());}, 50);}else{jQuery(‘#gform_5’).append(contents);if(window[‘gformRedirect’]) {gformRedirect();}}jQuery(document).trigger(‘gform_post_render’, [5, current_page]);} );} );>

Did you miss our previous article…
https://www.amazingsidingstl.com/?p=365

Renovating Your First Condominium Property? Here’s What You Need to Know

August 4, 2021

Design: I Interior

Renovating a Condominium is different since the process is more complicated than a typical HDB renovation. Therefore, it is inevitable that a greater degree of planning and legwork is required. Nevertheless, to help you start, here are 6 quick tips!

#1. Alterations that result in an increase in Gross Floor Area (GFA) will require planning permission

Design: Arc Definet

Any renovation works that result in an increase in GFA will require planning permission approval. When the home improvement works cause an increase in GFA, you will require a letter signed by the Secretary or Chairperson of the estate’s Management Corporation (MC). The letter has to include that MC has 90% resolution, to authorize you to proceed with the proposed works for the strata unit.

What this means to you
The authorization letter must be submitted together with the proposal as part of the planning application to the URA. Do note that conservation strata-titled residential properties need to adhere to different guidelines delineated here.

#2. Changes to common property will require MC’s approval

Design: LemonFridge Studio

Generally, making any alterations to common property will require the permission of the MC. These changes usually include improvement works that affect the external façade of the property, such as the installation of additional awning in a common property wall and balcony screens.

What this means to you
Find out what constitutes common property. In addition, you should also be aware that the concept of majority rule in a strata development should not be taken to the extreme, when the safety of children is at stake.

#3. Management Corporation (MC) rules might restrict the type of renovation activities

Design: Haus Werkz Interior

Generally, the estate’s house rules might restrict the kind of renovations that can be carried out. For instance, the house rules may stipulate the time and duration of renovation work that can be done during the weekdays and weekends. Furthermore, types of permitted renovation works may differ from estate to estate too. For example, popular balcony enhancements such as installation of glass curtains, are only permitted in certain Condominiums.

What this means to you
Find out the rules that govern the renovations in your Condominium and make sure that these regulations are communicated to your Renovation Professional. You should also consider engaging Renovation Professionals who have experience in carrying out renovation in Condominiums.

#4. Access to the estate is limited

Design: Space Vision Design

You have to arrange for your Renovation Professional’s access to the premises with the Management Agent (MA). If your Condominium was just granted the Temporary Occupation Permit (TOP) status, chances are there are many other renovations going on at the same time. Hence, the availability and access to the elevator and the visitor parking lots are limited.What this means to you
Remember to inform the appropriate MA staff, especially the security personnel, who and when your renovation workers require access well ahead of time. An experienced Renovation Professional would buffer in the expected delays due to the limited access to the buildings and come up with a contingency plan when that happens.

#5. Ensure that arrangement for bulky renovation waste removal is made

Design: The Scientist

Unlike HDB flats where Town Council provides a free bulky item removal service for the HDB residents, your Renovation Professional need to make sure that the disposal of the waste generated from the renovation should be removed on a regular basis. Certain items, such as flammable items, wet cement and other adhesive materials are not to be thrown into the refuse chutes.What this means to you
Find out from the MA if there are any guidelines that should be observed during the removal of the debris. Make sure that the MA is informed of the schedules for the removal of waste. Do take note that you are also liable for the cost of replacement or repairs for the damages to the refuse chute and/or Common Property. In addition, the waste removals workmen are to use only lifts and staircases stipulated by the MA, so as not to inconvenience the residents.

#5. Set aside a buffer budget

Design: Inside Living

No matter how well-planned the renovation is, something might go awry. Therefore, setting aside some buffer in the renovation budget helps, especially since renovating a Condominium will involve more overhead. For example, you might need to factor in the costs of renovation waste disposal.

What this means to you
The recommendation for a contingency budget is usually 5% to 10% of the total cost that you are prepared to spend. Remember to ask for a detailed breakdown of the renovation quotation.

Did you miss our previous article…
https://www.amazingsidingstl.com/?p=291

7 Best Dovetail Jigs [2021 Reviews]

July 30, 2021

Featured Image: Tools First

As you advance in woodworking, several of the more laborious and challenging skills to learn are joinery with complex joints like dovetails presenting several of the biggest obstacles. That’s the reason we come up with a list of the seven best dovetail jig reviews and offer a detailed buyer’s guide to help you get the best one for your needs.

.fusion-fullwidth.fusion-builder-row-1 { overflow:visible; }1.>

PORTER-CABLE Dovetail Jig with Mini Template Kit (4216) , Gray Includes template 4211 for half-blind, rabbeted half-blind and sliding dovetailsIncludes template 4213 for through dovetails and box jointsIncludes template 4215 for miniature through and half-blind dovetails, and miniature box jointsTemplate alignment lines and router bit depth gauges allow for quick, easy set-up; Router bit depth gauges allow user to quickly and accurately set the depth without taking measurementsIncluded with jig: templates, two lock nuts, wrench, and instruction manual. Machined aluminum template provides superior cutting accuracy and long term durabilityCheck Price Below

Buy on Amazon>

2.>

General Tools 861 Portable Aluminum Dovetail Jig, 12-inch, Woodworking, Furniture Building & Cabinet Making With Router Bit WOODWORKING MADE EASY- All-in-one 861 Dovetail Jig produces strong, precise dovetail joints right out-of-the-box quickly and easilySELF ALIGNING DESIGN- Ensures that both ends of the dovetail joint match up evenly every timeADJUSTABLE- Can accommodate boards of any width and easily adjusts the dovetail interference to create loose or tight jointsDURABLE- One-piece aluminum construction with integrated clamps allow precise clamping of jig to work piece while the table router control knobs assure safe, comfortable and accurate useINCLUDES: (1) 861 Dovetail Jig & (1) 14-degree, 1/2 -inch dovetail router bit for use with hand table or table routerCheck Price Below

Buy on Amazon>

3.>

Leigh D4R Pro 24″ Dovetail Jig One piece aluminum extrusion baseEasily produces handmade looking dovetail pins and tailsAccepts boards up to 24″ wideMaximum pin thickness 1-1/4″Includes three carbide router bitsCheck Price Below

Buy on Amazon>

4.>

PORTER-CABLE Dovetail Jig, 12-Inch (4210) Includes 4211 template for half-blind, rabbeted half-blind and sliding dovetailsTemplate alignment lines and router bit depth gauges allow for quick, easy set-up.Heavy-duty cam-type clamps with sandpaper-backed locking bars provide firm grip of woodRouter bit depth gauges allow user to quickly and accurately set the depth without taking measurementsIncludes 4211 template for half-blind, rabbeted half-blind and sliding dovetailsTemplate alignment lines and router bit depth gauges allow for quick, easy set-upCheck Price Below

Buy on Amazon>

5.>

Woodstock D2796 12-Inch Dovetail Jig with Aluminum Template Router requires a 7/16-Inch Guide Bushing and 1/2-Inch 14-Degree Dovetail Router Bit with 1/2-Inch shank (sold seperately)Comes with a 1/2-Inch aluminum templateSimple to set up, this sturdy, well-made jig makes 1/2-Inch half-blind dovetail joints, the hallmark of quality drawer constructionCheck Price Below

Buy on Amazon>

6.>

Keller Dovetail System 135-1500 Journeyman DoveTail Jig 15-inch precision-milled templateAccepts wood from 1/8 to 3/4 inches thickAccepts unlimited widths and lengthsBack-to-back modelNo test cuts, no wasted woodCheck Price Below

Buy on Amazon>

7.>

Rockler Complete Dovetail Jig Check Price Below

This device by Rockler is yet another jig well worth considering whether you’re on a small budget. It can deal with stocks with widths of as much as eleven inches and thicknesses of as much as ¾ in and is perfect for small shops or DIYers.

A unique feature of this particular jig is its dust collection process. It is composed of a vacuum that connects your template base to draw up the dust produced by the router, therefore lowering the quantity of cleaning up you’ve to accomplish. Most dovetail jigs don’t have this particular feature.

Choosing The Best Dovetail Jig

The most effective dovetail jigs clamp your workpiece in position, making it possible for you to run a router around a template. This generates an interweaving joint that seems like many bird’s tails, just like the name implies. A dovetail joint is an extremely powerful, stable joint with a good amount of surface area for gluing. This guide is going to help you pick the best dovetail jig for your workshop.

To further help you with the buying process, allow us to outline what features you ought to consider when buying the best dovetail jig.

Dovetail Jig Type

Fixed – This is the standard kind of dovetail jig that utilizes a template to guide your router when making the cuts. While the fixed dovetail jig isn’t almost as versatile on the onset, you can usually switch out the templates to create various kinds of joints. It’s also worth noting that fixed dovetail jigs are drastically more painless to use than variable dovetail jigs.

Variable – This is the new kind of dovetail jig, and it is typically marked as “infinitely variable” that’s technically correct. Basically, a variable dovetail jig permits you to set the placement of the various fingers to support your own “template.” While this boosts the variable dovetail jig’s versatility much higher than a fixed model’s, it would make this particular kind of jig quite tough to work with.

Templates

Templates are the guides used by fixed dovetail jigs to direct your wood router since it cuts the workpiece to make the joint. Based on how costly and well-crafted the dovetail jig is, you may have several templates out there, enabling you to create a wider assortment of various forms of joints.

Beyond providing several guides, some manufacturers double-side the templates to expand further the number of various joints you can make. Remember, several double-sided templates intend for you to cut the tails with one side and the pins with the other, and so check the directions to ensure you make use of the template properly.

Capacity

This is among the crucial attributes to think about when selecting a dovetail jig. It eventually limits the dimensions of the workpiece you can utilize and affects your power to make blind joints. The most advertised capability of any dovetail jig will be the width and decides precisely how wide the joining face your workpiece might be.

Nevertheless, the thickness or depth of the workpiece is often as important. However, not many dovetail jigs allow you to cut depths beyond one ½ inch. Although not universal, the gaps between the fingers of a template are usually ½ inch wide. However, variable dovetail jigs can certainly significantly increase or shrink distance.

Material

Based on how frequently you work with your dovetail jig, this is an incredibly important quality or one that’s good to have at the high end. For the most part, metals will be the materials you must search for, although various metals perform better for multiple parts of the dovetail jig.

When it involves the base, aluminum is quickly the most typical material used as it’s both lightweight and sturdy, decreasing the entire weight of the dovetail jig. The template & fingers, on the other hand, should be produced from steel to expand their lifetime as long as possible.

For single-piece dovetail jigs, many brands are going to use aluminum for the body and fingertips, and that isn’t inherently a lousy option, just become more cautious when dealing with it. In case you’re searching for a cheap dovetail jig, phenolic plastic material is moderately sturdy at first. However, it is going to lose structural integrity the more you use it.

Stability

Given how precise dovetail joints must be, the stability of any dovetail jig is pretty significant, though it’s not always paramount when buying the jig. This is since you can always work with your own clamps and base to secure the workpiece before cutting the wood, which increases the time it requires using the jig.

When it relates to dovetail jigs that have their very own securing method, cam lock clamps are undoubtedly the most effective as they’re not merely simple to use but hold workpiece from shifting while being cut. Some models use pressure knobs to hold the workpiece in place, which may work, though they’re less than as steady and will mar the surface of the wood.

Tips For Using A Dovetail Jig

If any wobble or play happens in the jig or workpieces, the results will not be as precise. Clamp the jig base securely to the workpiece or the table to ensure the best joints.

If the boards come from a shop, make sure to square upwards their ends prior to placing them in the router jig. Factory ends are hardly ever square, and routing them in a dovetail jig will develop a box that wobbles or does not assemble correctly. Consider running them over a jointer to guarantee that many of the surfaces are completely square. If it wasn’t, a hand plane is going to do the trick.

Alignment is everything. When you are clamping the workpiece in the jig, assure that things are square and aligned correctly. Don’t hurry and ensure that this particular part of the procedure is right. A blunder in this here will end with a poorly cut joint and two boards that do not align properly. This level is a lot more crucial when repositioning a jig to get a wider board: A tiny error here can hold joint from coming together at all.

For results that are consistent, make sure the jig or workpiece is clamped securely on the table.

Square the ends on the boards before milling them over the jig.

Ensure precise alignment, particularly when repositioning the jig on a bigger board.

Conclusion:

Porter-Cable did a superb job of more than a century to develop and provide top-quality tools. The Porter-Cable Dovetail Jig 4216 is one of them. Put this great tool to use for making the ideal drawing room or kitchen cabinets.

Porter-Cable has more than 100-year-old history, and it is a subsidiary of a Fortune 500 company. The history of the business is mirrored in its power tool products.

The Porter-Cable Dovetail Jig may be used to create different various joints, template no. 4211 is utilized for rabbeted half-blind and sliding dovetails, template no. 4213 used for making through dovetails & box joints. Similarly, template no. 4215 is going to allow you much easier construction of half-blind dovetails, miniature through, & miniature box joints.

To view our Amazon Associates Disclaimer, please click here.

The post 7 Best Dovetail Jigs [2021 Reviews] appeared first on Luxury Home Remodeling | Sebring Design Build.

Did you miss our previous article…
https://www.amazingsidingstl.com/?p=253

7 Best Siding Nailers [2021 Reviews]

July 23, 2021

Featured Image: Woodworking Toolkit

Siding can help defend the framework of your house, gives an additional layer of insulating material that may reduce your electricity expenses, and contributes curb appeal to improve the value. You can work with a regular hammer when mending or installing siding, but a siding nailer is undeniably quicker. It inserts each nail to an identical level with a single blow, so the siding is adequately protected.

Today, we’re here to present the best siding nailers for those who are searching for a siding nailer. We mentioned here all the essential features, along with a thorough “Buying Guide.” Thus, you can run through all these and select the best siding nailer suitable for you.

.fusion-fullwidth.fusion-builder-row-1 { overflow:visible; }1.>

BOSTITCH Coil Siding Nailer, 1-1-1/4-Inch to 2-1/2-Inch (N66C) The sliding nail gun drives wire weld and plastic inserted coil nailsAdjustable depth guide of the siding nailer sets nails to desired depths quickly and convenientlyThe coil siding nailer has a lightweight aluminum design for durabilitySoft rubber foot helps to prevent damage to softer woodsTool-free adjustable exhaust conveniently directs exhaust away from the userCheck Price Below

Buy on Amazon>

2.>

Freeman PCN65 Pneumatic 15 Degree 2-1/2″ Coil Siding Nailer Ergonomic and Lightweight Nail Gun with Tool-Free Depth Adjust and Side Load Magazine, Black Nailed It: This pneumatic coil siding fencing nailer features a lightweight and durable magnesium body, ergonomic grip handle, no mar tip, and transparent side load magazine that holds up to 400 wire or plastic coated siding nails for hard-working efficiency.Many Applications: This nailer is ideal for cement siding, sheathing, fencing, fiber concrete siding, decking installation, plywood, and OSB. It features depth adjustment, allowing you to customize the firing depth for many different types of projects.The Right Tool for the Job: We’re committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.Check Price Below

Buy on Amazon>

3.>Sale

Metabo HPT Coil Siding Nailer, 1-1/2 inch to 2-1/2 inch Siding Nails, Side load, Tilt Bottom Magazine (NV65AH2) SIDING NAILER: Accepts 16º wire collated coil siding nails from 1-1/2″ – 2-1/2″. Also accepts 15º plastic collated coil siding nails from 1-1/2″ – 2-1/4″SELECTIVE ACTUATION: Switch between sequential or contact nailing with the simple flip of a switchEASY LOAD: Side load, tilt bottom magazine for fast and easy reloadsFASTENERS: Drives wire and plastic sheet collated siding nails for added flexibilityNO MAR NOSE CAP: Protects material from accidental marksCheck Price Below

Buy on Amazon>

4.>

MAX USA CORP SuperSider CN565S3 Siding Coil Nailer up to 2-1/2″ Slim guide contact armAnti-double Fire mechanismMaintenance free end cap filter ; Easy-nail-load magazine, rafter hook and protective carrying case.Easy twist adjustable deflector ;Easy 360 degree twist adjustable exhaust deflector allows the user to easily divertexhaust air away from them self without any tool.Check Price Below

Buy on Amazon>

5.>

HBT HBCN65P 15 Degree Coil Siding Nailer with Magnesium Housing, 1-1/4-Inch to 2-1/2-Inch Plastic/Wire Collated Coil Siding Nails Drives 1-1/4- Inch to 2-1/2- Inch Plastic or Wire Collated Coil Siding Nails;Magnesium housing to provide light comfortable usage as well as promising durability;Easy Jam-Release and maintenance due to exposed nose guide when opening magazine;Sequential fire or contact fire through a flip of a switch;Tool-free depth adjustment sets nails to desired depths quickly and conveniently; 360˚ adjustable exhaust to direct air away from the user; 360˚ swivel air plug minimizes hose twisting for improved control around work area.Check Price Below

Buy on Amazon>

6.>

Metabo HPT Coil Siding Nailer, Siding Nails 1-1/2 inch To 2-1/2 inch, Side load, Tilt Bottom Magazine (NV65AH2) Hitachi Power Tools has renamed to Metabo HPT. Same great tools, with only a new name.Selective actuation switch allows for either sequential or contact nailing with the simple flip of a switchSide load, tilt bottom magazine for fast and easy reloads; Capable of driving nails as large as 2 1/2 x .099 inches at a rate of 3 per second4.8 pounds, lightweight and compact for easy maneuverabilityTool less depth of drive adjustment for optimal depth in a variety of applicationsCheck Price Below

Buy on Amazon>

Susceptible to regular jamming

Sebring Tip:

From durable tools to high efficient protective gear, the brand HBT has brought together everything you need to have. The siding nailer, HBCN65P, you can see here, is the most reliable and well-reviewed device from the brand with outstanding characteristics.

This particular nailer is usually used to drive 1-¼ inches to 2-½ inches plastic or wire collated coil siding nails. It’s provided a Magnesium housing that adds to its extensive durability and lightweight functionality.

6. Hitachi Coil Siding Nailer

Pros:

Portable and lightweight designVery reliableGood performance

Cons:

Discontinued unitExpensive

Sebring Tip:

This Hitachi NV65AH2 siding nailer is similar to the previous Metabo HPT choice stated in this review. You receive the same one ½ inch to two ½ inches long nail support while using this siding nailer for building purposes. It can drive these nails without a lot of work as it’s a pneumatic tool. The user must link an air compressor with operational air pressure from 70 PSI to 120 PSI. When that’s completed, you drive two ½ inch nails at a quick speed of up to three nails a minute which can conserve plenty of time for the user.

7. DEWALT DW66C-1 Fencing Nailer

Pros:

Light designWorks with various types of nailsRubber parts in several places

Cons:

A little largeTypical performance

Sebring Tip:

The Dewalt DW66C siding nailer provides a 15-degree angle adjustment just per its name. This may be very handy for different types of applications. As for its nail length support, it can accommodate one ½ inch to two ½ inch long siding nails with no problems. And these nails could be either wire or plastic sheet collated ones as per your need. You can install a total of 300 such nails in the nail magazine provided by this siding nailer. This means you don’t need to change nails repeatedly as you work at 70 PSI to 120 PSI operational air pressure.

Before Buying A Siding Nailer

There’s a multitude of nailers (or nail guns) offered to deal with various activities. They vary from compact brad nailers for a comprehensive job to heavy-duty framing nailers, several of which can get nails more than six inches in length.

A siding nailer is an extremely function-specific tool. The most effective siding nailer will help you finish the process quickly, but first, consider the task you’re making use of it for. In case you’ve got plenty of siding to install, a siding nailer is what you need to have. However, if you have moderate repair work to do—and you are torn in between a siding nailer and a framing nailer—then a midsize model of the latter must perform the task.

What To Consider When Selecting The Best Siding Nailer

You will find a lot of distinct siding nailers to select from. A few tend to be more suitable for low-volume DIY use, while others are heavy-duty professional versions. When determining which will be the best siding nailer for all the tasks you have to undertake, search for one that’s high quality and provides the right mixture of characteristics.

Size & Weight

Balance and weight are essential characteristics of siding nailers. If something is top-heavy, it will stress your wrist, which will rapidly be uncomfortable. A lot of the time, fitting siding necessitates being up a ladder in which a bulky device might be hard to control. Siding nailers are not especially weighty—4½ to 6½ lbs (framing nailers can be two times that)—though just one pound could make a huge difference when you are making use of the instrument for extended periods.

Nail Length And Type

The frame of the siding and the house typically move slightly as seasons change. Therefore, siding nails have a round head to stop the siding from pulling free. The shank of the nail is generally textured, both with rings or a spiral, to enhance the grip of the wood.

The most popular material is galvanized metal. Electro-plated would be the cheaper style, although hot-dipped galvanizing offers a fuller, longer-lasting coating. Wood that has all-natural tannins will attack the steel. Therefore, aluminum nails might be used alternatively. Stainless steel is yet another choice—especially in coastal areas—since it is more resistant to salt in the air.

Length differs from 1½ to 2½ inches, with longer nails primarily being used when a liner, backing board, or battens are placed between siding and frame.

Magazine Capacity

Siding nails are supplied in long coils, usually set for a 15-degree feed angle and then collated (held together) by welded wire or plastic ribbon. The former is affordable, while the latter offers a neater finish. This particular coil fits into the magazine on the nailer and feeds instantly. Several siding nailers can utilize either collation type, though it is not necessarily the case.

Operating Pressure

Several kinds of nailers provide an option for the power source. They could be corded, battery or pneumatic powered. That isn’t true of siding nailers, which currently tend to be pneumatic. This implies you want an air compressor to run them. You’ll find various versions offered, and lightweight transportable compressors have their benefits, but it is crucial the one you select could provide sufficient operating pressure. Typically speaking, which will be somewhere between 70 psi (pounds per square inch) and 120 psi.

Firing Mode

A siding nailer could fire the nail in one of two methods: sequential or contact (also called “bump”). Anyone who has utilized a nail gun of any type has run into sequential firing, which means the nail is fired once the trigger is pressed.

Depth Adjustment

To have a depth adjustment feature is vital for two reasons. For starters, it compensates for employing nails of various lengths. Next, it can modify the firing pressure to fit the wide selection of siding materials out there.

Usually, if you place a nail, even with a hammer or a coil nail gun, you prefer that nail head being driven flush with the surface, and somewhat under. When installing siding, you have to keep a small gap to permit the natural movement we pointed out earlier. Wood, concrete, vinyl, etc., have various quantities of resistance as the nail passes through. When the depth has been fixed, it will not be possible to utilize the same gun for multiple materials. The most effective siding gun could be adjusted to compensate.

Jam Removal

Most nailers jam occasionally. With budget versions, the mechanism is not well-produced as it may be, though faults in the nail coil or tiny pieces of debris getting caught within the nailer could also create problems.

Regardless of the reason, a jammed nail is irritating at best. Having the ability to remove it rapidly is an invaluable feature. As most jams happen in or close to the nailer’s nose, easy access to this particular part needs to be provided. Having the ability to clean a jam without wanting your tool kit is a certain advantage, and fresh siding nailers help make it possible.

Extra Features

Even though the sections above cover the primary key components when selecting the ideal vinyl siding nailer, many additional functions include convenience.

To be able to expel air following each strike, siding nailers come with an exhaust. When it is inadequately directed, it puffs air directly in your face. It is not deadly, but it is good in case it could be directed anywhere else.

A no-mar rubber nose (which oddly is known as a “foot” on specific models) can help prevent the nailer from marking the surface of the siding. When you are utilizing wire collated nails for siding, the gun is going to eject little bits of wire debris as you do your project, so the facility to capture and direct these is additionally helpful. A lock setting that stops accidental firing is an additional benefit, improving security. Many models, in addition, add a helpful belt hook.

Conclusion:

Our winner is Bostitch Coil Siding Nailer.

Bostitch is a brand with recognition for reliability and high performance, making it a preferred option amongst contractors.

This Bostitch coil siding nailer provides all of the characteristics you require in a well-balanced tool at only 4.9 lbs. It will take either wire weld or clear plastic insert nails from 1¼ to 2½ inches in length. The magazine capacity is 300. The working range is 70 to 120 psi with a tool-free depth setting, an easy-to-adjust exhaust, and no-mar feet.

The Bostitch is provided with contact firing enabled—the professional’s choice—although it could be changed to sequential firing by altering the trigger.

To view our Amazon Associates Disclaimer, please click here.

The post 7 Best Siding Nailers [2021 Reviews] appeared first on Luxury Home Remodeling | Sebring Design Build.