Conclusion:

8 Common Renovation Mistakes Homeowners Make that Affect their WiFi Router Performance

August 30, 2021

Home Design No Comments

Image from PC Mag

Experience poor WiFi signal when enjoying your daily dose of Spotify or Netflix? Flaky internet connection while working from home, or doing home based learning with your children? Guilty of finding a convenient, dark corner to chunk away the plain-looking WiFi router, so that it will not clash with the meticulously designed home interiors?

Read on to find out you can do to rectify your wonky WiFi signal and fix the 6 common mistakes that homeowners make when setting up their WiFi router.

Image from Igyaan

#1. Not planning where the WiFi router should be placed

Did you neglect to plan where the WiFi router should be placed during the home renovation? When it comes to home interior design, most homeowners overlooked the fact that the WiFi router needs to be part of the renovation design, so that it will be able to function optimally. In actuality, the placement of the WiFi router is the most important factor, since a poor location will significantly affect the strength of the signal negatively.

Design:ButGet Studio

What should you do?
Watch out for common home appliances such as TV, cordless phones, washing machines and dryer and move the WiFi router as far away from them as possible. To ensure that there is an even coverage of the WiFi signal in every corner of your house, you should place your WiFi router at the center of your abode. Boost the WiFi signal further by placing it above the floor level and make sure that it should never be left on the floor.

Do you know?
As the router is a sensitive piece of equipment, it is should be placed in areas where its signals will not be affected. As a general guideline, routers should be placed away from any metal objects, electrical appliances and not be physically obstructed by walls. This is because metal disrupts WiFi signal and electrical appliances emit electromagnetic waves which will interfere the WiFi signal too.

Design: Swiss Interior Design

#2. Not placing the WiFi router outside of the Distributor Box (DB)

Distributor box (DB) is commonly used as the networking HQ where the WiFirouter is placed since that is where the data points are located. However, the DB is usually located at an isolated end of the property and as a result, WiFidead spots are created due to the unfavourable location.

Design:I-Chapter

What should you do?

Plan for the WiFi router to be placed at the center of your home. Or consider setting up an additional Access Point (AP) solution to create a Wireless Local Area Network (WLAN) to improve the connectivity. An AP works by connecting to a wired router, switch or hub via an Ethernet cable to project a WiFi signal.

Do you know?
The new BTO and Condominium units are equipped with a network switch and the OpenNet port and these are located in the DB.

Design: Fifth Avenue Interior

#3. Not adding more Access Points (AP)

Adding more Access Points helps to reduce or eliminate the dead zones where there is no WiFi connectivity.

Design: Archive Design

What should you do?

Decide on where the WiFi router and AP will be placed, prior planning the layout of the high-speed Ethernet cables.

Do you know?
APs are used to extend the wireless coverage of an existing network. A high-speed Ethernet cable from a WiFi router is needed to connect to an AP. This converts the wired signal into a wireless signal.

Design: The Interior Lab

#4. Not coming up with the location plan before deciding on the carpentry built-ins

If not planned properly, the carpentry built-ins will obstruct the installation of the WiFirouter and AP. In addition, never hide the WiFirouter away within cabinetry as it interferes with the signals.

Design: Fifth Avenue Interior

What should you do?

Share and mark the locations where the WiFirouter and APs should be placed on the floor plan with your interior design professionals. In this way, the interior design professionals can propose the design and location of the carpentry to minimise the obstructions.

Do you know?
Additional power points and wall sockets should also be installed in the same locations, since they house the electrical devices, WiFi router and AP.

Design: The Local INN.Terior

#5. Not considering an open concept design

No walls mean minimal physical obstructions to deflect and affect the WiFi signals.

Design: LOME Interior

What should you do?

Consider applying open concept design for the study rooms, where devices such as computer accessories and peripherals are required to be constantly connected to the WiFirouter.

Do you know?
The cost of hacking wall may vary between S$500 and S$1000, depending on the dimension and thickness of the wall.

Design: Authors • Interior & Styling

#6. Not installing network extenders for an odd-shaped home

Image from Geekabit

WiFi network extenders usually offer a better WiFi performance. This is because they provide a more consistent, reliable, speedy WiFi to almost every corner of your home by communicating directly with the WiFi router. In this way, WiFi network extenders significantly shorten the distance between the receiving devices and the WiFi signal.

Design: DSOD Interior

What should you do?
Get a reliable WiFi extender from this list to boost your network.

Do you know?
The other WiFi boosters include repeaters, which are actually 1st generation WiFi signal extenders, which re-broadcast the WiFi signal received. However, the latency, or WiFi network response time, is increased when repeaters are used. The other WiFi booster is the wireless range extenders, that sit between the WiFi router and the location where better wireless coverage is needed. Similar to a wireless repeater, they grab the signal from the WiFi router and re-broadcasts it. However, the signal is rebroadcast on a different wireless channel from the WiFi router.

Design: Key Concept

#7. Not using wireless mesh routers for a double or triple storey property

Image from Linksys

A traditional WiFi router setup usually is made of single receiver, and a couple of WiFi boosters when the wireless signal is poor. However, the mesh WiFi routers, or known as whole home WiFi systems, are made of several satellite modules, or nodes. These modules are meant to be placed around the home interiors for a full WiFi coverage. In this way, mesh WiFi routers are able to deliver strong and the most consistent WiFi signal in the entire house. Unlike the traditional WiFi router setup, the mesh WiFi routers are part of a single wireless network that shares the same Service Set Identifier (SSID), which is also the name for a WiFi network.

Design: Weiken.Com

What should you do?
If your ageing traditional WiFi router is due for a tech refresh, you should consider checking out the following best WiFi mesh network systems!

Do you know?
Mesh WiFi routers are recommended for large homes, homes with double or triple floors or odd-shaped home with WiFi dead zones. Such a multi-node system is typically easy to set up and also, being wireless also makes it easy for homeowners to decide where to place these routers.

Design: Aesthete Interior Design

#8. Not knowing the following WiFi router best practices:

. Not ensuring that the WiFi router is always updated with the latest firmware

Firmware updates are important because critical patches for security holes as usually packaged together with the update. Once the WiFi router has been updated, the performance, stability and security of the WiFi router are enhanced. In this way, the WiFi router has a faster response and is safer to use too.

Design: Ascend Designs

What should you do?

Launch a web browser on your computer or mobile device and login to your router. Look out for the option “Firmware/Router Update” and click install. Wait for the firmware to be updated and reboot the WiFi router once the installation is completed.

Do you know?
Keeping the WiFi router updated is important since once it is infected with a malware, it will eat up the bandwidth, slows down the devices connected to the router. The malware might also proliferates across the network and infects the other devices connected to the router.

Design: Fineline Design

B. Not rebooting the WiFi router

The WiFi router is similar to your computer and hence, a daily reboot helps to clear its memory. In addition, always check for the latest firmware updates and make sure that the security patches are applied. In addition, do note that the firmware updates and patches are only applied after the WiFi router has been rebooted.

Design: Neu Konceptz

What should you do?
You must reboot the WiFi router immediately after the updates and patches have been installed.

Do you know?
Make sure to turn off the WiFi router after the end of each day.

Design: The Scientist

C. Not changing the WiFi router default password settings

Most of the WiFi routers are shipped with a default password and it is very easy to guess. Some do not even come with a password so that you can gain direct access to the WiFi router’s settings when you are using it the first time. When the default password is not changed, anyone can easily hack into the WiFi router, steal its bandwidth or even lock you out by changing its settings.

Design: The Interior Lab

What should you do?

You must replace the default password with a strong password during the initial setup. A strong password should have a combination of uppercase and lowercase letters, symbols and numbers. Avoid the common passwords listed here. The password should be at least 8 characters long and never use personal information in the password.

Do you know?
Default router passwords can be found in the WiFi router manuals. In this way, if you encounter issues setting up the router, you can simply refer to the manual for the default password. A WiFi router password is not the same as the WiFi password. The former password is used to access the router’s settings while the latter password is used to access the WiFi network.

Design: Space Factor

D. Using a weak password for the WiFi network

When your WiFi password is weak, such hackers will exploit the weakness and steal your WiFi bandwidth. When this happens, the smaller bandwidth will mean slower WiFi performance.

Design: LOME Interior

What should you do?

You must use difficult to guess and complicated password to secure your WiFi and remember to change the password on a regular basis.

Do you know?
Many hackers rely on open source password crackers to crack weak passwords easily. Some simply uses brute force by cycling through the known words, personal info, alphabet, numbers in all different combinations until the password is found.

Design: NIJ Design Concept

if(!gform){document.addEventListener(“gform_main_scripts_loaded”,function(){gform.scriptsLoaded=!0}),window.addEventListener(“DOMContentLoaded”,function(){gform.domLoaded=!0});var gform={domLoaded:!1,scriptsLoaded:!1,initializeOnLoaded:function(o){gform.domLoaded&&gform.scriptsLoaded?o():!gform.domLoaded&&gform.scriptsLoaded?window.addEventListener(“DOMContentLoaded”,o):document.addEventListener(“gform_main_scripts_loaded”,o)},hooks:{action:{},filter:{}},addAction:function(o,n,r,t){gform.addHook(“action”,o,n,r,t)},addFilter:function(o,n,r,t){gform.addHook(“filter”,o,n,r,t)},doAction:function(o){gform.doHook(“action”,o,arguments)},applyFilters:function(o){return gform.doHook(“filter”,o,arguments)},removeAction:function(o,n){gform.removeHook(“action”,o,n)},removeFilter:function(o,n,r){gform.removeHook(“filter”,o,n,r)},addHook:function(o,n,r,t,i){null==gform.hooks[o][n]&&(gform.hooks[o][n]=[]);var e=gform.hooks[o][n];null==i&&(i=n+”_”+e.length),null==t&&(t=10),gform.hooks[o][n].push({tag:i,callable:r,priority:t})},doHook:function(o,n,r){if(r=Array.prototype.slice.call(r,1),null!=gform.hooks[o][n]){var t,i=gform.hooks[o][n];i.sort(function(o,n){return o.priority-n.priority});for(var e=0;eComplete this form and we will recommend you a list of reputable interior design firms that fit your renovation requirements. It’s free! Note: This form is not applicable for repair works request.How many interior designers do you wish to get in touch with?3 – 55 – 8

My Property

My Property Type isHDBApartment/CondominiumPrivate HouseCommercialThe room type isPlease selectStudio2 Rooms3 Rooms4 Rooms5 RoomsAbove 5 RoomsProperty StatusNewResalePresently StayingKey Collection TimeYes, Key is collectedNo, in 1 – 3 months timeNo, in 3 – 6 months timeNo, in 7 – 12 months timeHave not purchase the unitProperty AddressUpload your Floor PlanAccepted file types: jpg, gif, png, pdf, ppt, jpeg, Max. file size: 2 MB.We recommend to attach your floor plan for a better estimate. File must less than 2MB.

Project Info

Area(s) you need to renovateLiving RoomDining RoomKitchenBedroomsBathroomsOthersWhole unitPreferred design styleNo PreferenceAsianClassicContemporaryEclecticIndustrialMediterraneanMidcenturyMinimalismModernRetroRusticScandinavianTraditionalTransitionalTropicalVictorianVintageMy project priority isPlease selectAesthetically Nice – I want good designCost effectiveness – I’m on a tight budgetMy renovation budget isPlease selectNot Fixed20,000 and Below20,001 – 30,00030,001 – 40,00040,001 – 60,00060,001 – 80,00080,001 – 100,000100,001 – 200,000200,001 & AboveDo you require renovation loan?Please selectYes, please call meNo. I don’tOther information?

My Contact Details

My name isFirstLastMy Email isYou can call me atHow Did You Get To Know Us?Please selectGoogleFacebookInstagramYahooEvents/RoadshowFriendsNewsletterRenoNation MagazineThe Straits TimesSME MagazineBingMSN Search

AgreementI acknowledge that the details provided in this form will be shared with Renonation.sg and the recommended interior design firms.AgreementI wish to receive home renovation inspiration, tips and guides from Renonation.sgEmailThis field is for validation purposes and should be left unchanged.
gform.initializeOnLoaded( function() {gformInitSpinner( 5, ‘https://www.renonation.sg/wp-content/plugins/gravityforms/images/spinner.svg’ );jQuery(‘#gform_ajax_frame_5’).on(‘load’,function(){var contents = jQuery(this).contents().find(‘*’).html();var is_postback = contents.indexOf(‘GF_AJAX_POSTBACK’) >= 0;if(!is_postback){return;}var form_content = jQuery(this).contents().find(‘#gform_wrapper_5’);var is_confirmation = jQuery(this).contents().find(‘#gform_confirmation_wrapper_5’).length > 0;var is_redirect = contents.indexOf(‘gformRedirect(){‘) >= 0;var is_form = form_content.length > 0 && ! is_redirect && ! is_confirmation;var mt = parseInt(jQuery(‘html’).css(‘margin-top’), 10) + parseInt(jQuery(‘body’).css(‘margin-top’), 10) + 100;if(is_form){jQuery(‘#gform_wrapper_5’).html(form_content.html());if(form_content.hasClass(‘gform_validation_error’)){jQuery(‘#gform_wrapper_5’).addClass(‘gform_validation_error’);} else {jQuery(‘#gform_wrapper_5’).removeClass(‘gform_validation_error’);}setTimeout( function() { /* delay the scroll by 50 milliseconds to fix a bug in chrome */ jQuery(document).scrollTop(jQuery(‘#gform_wrapper_5’).offset().top – mt); }, 50 );if(window[‘gformInitDatepicker’]) {gformInitDatepicker();}if(window[‘gformInitPriceFields’]) {gformInitPriceFields();}var current_page = jQuery(‘#gform_source_page_number_5’).val();gformInitSpinner( 5, ‘https://www.renonation.sg/wp-content/plugins/gravityforms/images/spinner.svg’ );jQuery(document).trigger(‘gform_page_loaded’, [5, current_page]);window[‘gf_submitting_5’] = false;}else if(!is_redirect){var confirmation_content = jQuery(this).contents().find(‘.GF_AJAX_POSTBACK’).html();if(!confirmation_content){confirmation_content = contents;}setTimeout(function(){jQuery(‘#gform_wrapper_5’).replaceWith(confirmation_content);jQuery(document).scrollTop(jQuery(‘#gf_5’).offset().top – mt);jQuery(document).trigger(‘gform_confirmation_loaded’, [5]);window[‘gf_submitting_5’] = false;wp.a11y.speak(jQuery(‘#gform_confirmation_message_5’).text());}, 50);}else{jQuery(‘#gform_5’).append(contents);if(window[‘gformRedirect’]) {gformRedirect();}}jQuery(document).trigger(‘gform_post_render’, [5, current_page]);} );} );>

Did you miss our previous article…
https://www.amazingsidingstl.com/?p=526

Josef Frank Scandinavian Modern wallpaper — 12 historic designs still available today

August 27, 2021

Josef Frank’s archival wallpaper from designs he created from around 1920 to 1950 have proved to be timeless — complex yet calming, whimsical yet sophisticated — and as suitable for trendy interiors today (wallpaper is having another cyclical ‘moment’) as they are for owners of mid century homes who want to stay true to the…

The post Josef Frank Scandinavian Modern wallpaper — 12 historic designs still available today appeared first on Retro Renovation.

Did you miss our previous article…
https://www.amazingsidingstl.com/?p=525

7 Best Roofing Nail Guns [2021 Reviews]

August 27, 2021

Home Improvement No Comments

Featured Image: Amazon

You want to ensure you have the proper tool when it comes to repairing a roof. Ideally, if you’re fixing your roof, this isn’t something you’ll have to do frequently. Nevertheless, having a roofing nail gun may make the task a lot simpler. When a storm hits and you need to replace some tiles, you’ll be glad you have this powerful tool in your toolbox.

If you’re looking to buy a roofing nailer but aren’t sure where to start, you’ve come to the perfect spot. We will discuss all you need to know about roofing nail guns before you purchase one, and look at some of the finest roofing nail guns on the market right now.

.fusion-fullwidth.fusion-builder-row-1 { overflow:visible; }1.>

BOSTITCH Coil Roofing Nailer, 1-3/4-Inch to 1-3/4-Inch (RN46) The sliding nail gun has lightweight aluminum housing for job site durabilityZero nail lockout feature of the siding nailer eliminates dry firing and indicates when to reload the magazineNosepiece of the coil siding nailer features carbide inserts for long-life performanceAggressive wear guards and skid pads protect the tool from damage on abrasive surfacesQuick-set adjustable depth guide sets nails to desire depths quickly and convenientlyCheck Price Below

Buy on Amazon>

2.>

Hitachi NV45AB2 7/8-Inch to 1-3/4-Inch Coil Roofing Nailer (Side Load) (Discontinued by the Manufacturer) Hitachi Power Tools has renamed to Metabo HPT; Same great tools, with only a new nameCheck Price Below

Buy on Amazon>

3.>

Senco Roof Pro 455XP Nailer With Sequential Actuation Trigger 3D0101N This product is easy to use.This product is highly durableThis product is manufactured in ChinaDrives 11 gauge (.120″) , full round head roofing nails 3/4″ 1-3/4″ smooth shank.360 degree adjustable exhaustCheck Price Below

Buy on Amazon>

4.>

PORTER-CABLE RN175B Roofing Nailer The product is Coil Roofing NailerEasy to useThe product is manufactured in ChinaCompact body design is 5-percent lighter for improved balance and control compared to previous modelTool-free adjustable shingle guide for accurate shingle placementCheck Price Below

Buy on Amazon>

5.>

WEN 61782 3/4-Inch to 1-3/4-Inch Pneumatic Coil Roofing Nailer with Carrying Case Fire 11-gauge nails (.12 inches) anywhere from 3/4 to 1-3/4 of an inchAdjustable shingle guide and depth control makes for easy shingle spacing during jobsHolds up to 120 nails at a time with a quick release for easily fixing jamsUses pneumatic operating pressure anywhere from 70 to 120 PSINOTE: unit may arrive in one of two color schemes; yellow and blue or orange and blackCheck Price Below

Buy on Amazon>

6.>Sale

MAX USA CORP SuperRoofer CN445R3 Roofing Coil Nailer up to 1-3/4″ REDUCED TAR BUILD UP: Tar resistant nose is designed to resist tar 8x longer than conventional tools. When necessary, the SuperRoofer’s contact foot is easy to remove, clean and is also inexpensive to replace.SELF-CLEANING FILTER FOR RELIABLE OPERATIONS: The patented, self-cleaning maintenance free end cap filter, captures foreign substances before they can enter the tool and automatically safely ejects them when the air hose is disconnected.SIMPLE TOOL MAINTENANCE: A removable contact foot allows roofers to safely maintain and clean components of the tool without having to submerge the tool in corrosive cleaning agents.NO NAIL WASTE OR JAMS: A nose magnet holds the last nail in place, allowing contractors to use every nail in the coil; it also prevents the tool from jamming.CONSISTENTLY AND ACCURATELY SHOOTS NAILS: The depth adjustment dial allows operators to effortlessly drive nails into hard materials, and also control depth of drive when fastening soft materials, for a consistently polished finish.Check Price Below

Buy on Amazon>

7.>

HBT HBCN45P 3/4” to 1-3/4” Coil Roofing Nailer with Magnesium Housing Drives 11 gauge full head coil roofing nails ranging from 7/8” To 1-3/4”Selective actuation switch allows for either sequential or contact modeTool-free adjustable depth control helps set nails properly; adjustable shingle guide allows for quick and consistent shingle spacingDurable and lightweight magnesium housing helps reduce user fatigueSkid-resistant pads/wear guards for safety and tool protection; contact safety With Carbide inserts for less wear and tearCheck Price Below

Buy on Amazon>

1. Bostitch Coil Roofing Nailer

Pros:

Extremely versatileSimple to use and balanceIt’s simple to load and very powerful

Cons:

You may experience double nailing until you’ve become accustomed to it

Sebring Tip:

Bostitch is another industry leader for nail guns, and their roofing nailer is no exception. Its characteristics make it a reliable option for several different tasks, including exterior drywall work, insulation boards, and fiber cement. The depth adjustment drive is one of the features that makes it so flexible, with five distinct settings. The side-load canister and zero-nail lockout let you keep moving while preventing dry firing.

The gun can carry up to 100 nails ranging in length from 3/4 inch to 1 3/4 inch. These options are ideal for shallow driving and countersinking applications that need flush mounting. There are skid pads to prevent markings and a carbide inlay in the nose guard for extended life.

2. Hitachi Coil Roofing Nailer

Pros:

Nail depth may be easily adjusted using a knobIt’s ideal for both hot and cold weatherLightweight and well-balanced

Cons:

7/8 inch nails may not drive straight

Sebring Tip:

Hitachi is a well-known brand that produces high-quality roofers that can be fired in contact or sequential manner. It also features a depth firing option, allowing you to use it with a range of roofing materials for a consistent nail drive and hold. When working on the job, the coil feed provides a fast and simple side reload.

The magazine can contain 120 nails ranging in size from 7/8 inch to 1 3/4 inch. The nailer is very light, weighing just 5.5 pounds, and it is simple to operate without becoming fatigued. It can be seen on a roof without sliding because of the rubberized surface, and it can withstand the toughest weather.

3. Senco Roof Pro 455XP Nailer w/ Sequential Actuation Trigger

Pros:

Stylish and well-balancedWear plates and body are very durableAll maintenance tools are included in the case

Cons:

It’s possible that the depth adjustment won’t be consistentMultiple firing occasionally

Sebring Tip:

Senco is well-known in the roofing sector for its long-lasting nailers. You can handle a broad range of roofing materials with the capacity to drive 11 gauge nails at 3/4th inch to 1 3/4th inch. It also features an easy-to-adjust drive depth control to guarantee a snug fit every time. The exhaust is also 360-degree swivel-adjustable to prevent air from blowing back on you as you work.

It’s still light enough for one-handed use, and it frees up a hand for balance and reliable nail placement at 5.5 pounds. The contact actuation trigger enables quick-firing sequences while also ensuring safety and assisting with nail placement.

4. Porter Cable Roofing Nailer

Pros:

Exceptionally consistentIt’s tough & can withstand being droppedIt’s well-balanced and simple to use

Cons:

It does not include a coupler

Sebring Tip:

Many professionals and amateurs use Porter Cable roofing nailers as all-around nail guns because they know they will receive a good product. The brand specializes in nailers, and their roofing nailer options are some of the finest on the market. This model has an adjustable shingle guide as well as a depth guide to help you stay on track. These tool-less features are simple to use and work well with the bump or sequential firing techniques you may choose from.

The dual-door magazine enables quick reloading on the job, and it also includes skid pads and wear-resistant shields to protect surfaces and extend the magazine’s life. It can quickly shoot a 3/4ths inch to 1 3/4ths inch nail, much as most other roofing guns.

5. Wen 61782 Coil Roofing Nailer

Pros:

Reasonable pricingHolds a range of nail sizes in a large magazineA durable plastic case is included

Cons:

It’s just good for one taskJams sometimesCan double shootWhen compared to other roofing nailers, this one is heavy

Sebring Tip:

This is a low-cost, user-friendly roofing nailer that’s ideal for completing a couple of jobs. It’s efficient, and buying one will save you money over renting one for the length of the project.

This nailer is a great value for the money. It has many of the same features as some of the higher-end versions, such as a 120-nail magazine capacity and the ability to fire the same gauge nails from 3/4 to 1 3/4 inch. It’s tough and may last a long time without needing to be refilled.

6. MAX CN445R3 Coil Roofing Nailer

Pros:

Getting a lot of positive feedbackDepth adjustment without the use of any toolsFilter cap to keep dust and debris out of the filterThe air hose may be kept out of your way thanks to the tangle-free swivel fitting

Cons:

It’s a little expensiveThere are no carrying cases availableManual depth adjustment is somewhat off

Sebring Tip:

The MAX CN445R3 SuperRoofer nailer is a tool that is often overlooked. People who adore it rave about it. Therefore, we’ve included it in our reviews. Thanks to the rubber grip, this lightweight roofing nailer weighs just 5.2 pounds and is simple to grasp. The tangle-free swivel fitting allows the air hose to rotate, allowing you to move the nailer around more easily. All of these factors help to make lengthy tasks more pleasant. You can work for longer periods of time and finish more quickly.

7. HBT HBCN45P Coil Roofing Nailer

Pros:

Skid-resistant cushioningAdjustment without the need of any toolsThe shingle guide is adjustableIt’s really lightAllows for a variety of nail sizes

Cons:

Jam downtime and may not load properly at times

Sebring Tip:

The HBT roofing nail gun is designed to drive 11-gauge coil nails with sizes ranging from 7/8 inch to 1-3/4 inch, offering you additional options. The built-in actuation choices allow you to switch between sequential and contact modes at any time, and the easy changeable shingle guide system allows you to modify the customizable depth without any additional equipment. In addition, the tool’s front was designed with skid-resistant materials and a wear guard for greater protection, as well as a lightweight magnesium housing to decrease weight and enhance mobility.

Roofing Nail Gun Buying Guide

It’s critical to know what you’ll be utilizing a roofing nailer for before purchasing one. Obviously, you’ll use it for roofing, but how will you use it? Is it simply the roof of your shed or an extension to your home that you’re working on? Or are you a roofing contractor who will be using your nailer on a slew of jobs? While a low-cost roofing nailer may get you through one or two minor tasks, it’s unlikely to be adequate to do job after job. With that in mind, here are a few more things to think about.

Durability

If you’re a contractor, this is particularly essential since you want a tool that will endure.

Most roof nailers are intended to survive some exposure to the weather since they are meant to be used outside. They’re usually made of aluminum and steel, and they’re very sturdy.

Construction

It may seem ridiculous, but the way a roofing nailer feels may tell you a lot about its quality. You should feel like you’re carrying a tough piece of equipment when you take it up, despite how light it is. The higher the quality of your roofing nailer, the longer it will endure.

Versatility

When it comes to flexibility, there are two factors to consider. First and foremost, can the nailer be used for purposes other than roofing? Some will come with accessories that enable you to use them for other outside chores, such as siding installation.

Second, what kind of materials can you nail with your roofing nailer? Some are extremely adaptable and may be used on waterproof tar paper, asphalt and fiberglass shingles, vinyl and aluminum siding, and so forth.

Another item to consider is weatherproofing. It would be ideal if all roofing work could be completed during the warm, dry months, but this isn’t always possible. While you should never work on a roof while it’s raining, your roofing nailer will almost certainly be exposed to moisture. During the colder months, you’re even more likely to require it. Check to see whether your nailer can take a little water and won’t freeze in the cold.

Obviously, the more functions a roofing nailer has, the better purchase it will be. This is important to remember, particularly if you are spending a significant amount of money on your purchase.

Safety

Safety is always a priority, but utilizing this specific equipment on a roof adds an additional layer of risk and necessitates extra caution.

Rubber grips are a little detail that makes a huge impact. Not only will this make it simpler to grip and manage the nailer, but it will also offer some friction on a sloping roof. The grips really prevent the nailer from slipping and potentially tumbling away from you. A fall may damage your tool permanently, but it also poses a significant safety danger to anybody in the area below.

Injuries to the feet and hands are unfortunately frequent while using nail guns. When possible, use sequential mode and always use protective gear, particularly safety glasses.

Useful Accessories To Have In A Roofing Nail Gun

There are a few items that are great to have but don’t actually impact the performance of your coil nailer:

A case. It’s a good idea to have a sturdy plastic storage box on hand. It provides you someplace to store your gun when you’re not using it, even if it’s only to keep it dry at the end of the day until you need it again the following day.

Directional Exhaust. This is one of the things that you don’t know how useful until you put it to use. It’s a lot more pleasant to work if you can keep the trash and air out of your face.

Tool-less depth adjustment. It’s as simple as turning a dial. While you won’t achieve the same precision as a manual adjustment, some of the best nailers have created tool-free adjustments that are fairly close.

Jam clearing. While excellent firearms shouldn’t jam all that frequently, it’s unavoidable that you’ll have to deal with one at some point. Having a simple method to break out of a jam may help you feel less frustrated and get back to work faster.

Other Factors To Consider When Buying A Roofing Nail Gun

Because there are so many various roofing nailers to choose from, it’s a good idea to familiarize yourself with the characteristics of each before making a purchase. We’ll go over some of the differences in roofing nailers in our purchasing guide so you can determine which one is perfect for you.

Pneumatic or Cordless Power Supply?

The first choice you’ll have to make is whether you want a pneumatic or cordless roofing nailer. A rechargeable battery & a butane gas canister are placed inside a cordless roofing nail gun. With an electric roofing nailer, you have more freedom since all you have to do is make sure the battery is charged beforehand, and you can work on your roof without having to worry about cables getting your way. You may also buy extra backup batteries to put on the roof with you in case your main battery dies.

Nail Type: Can all nail sizes be accommodated by roofing nail guns?

When purchasing coil roofing nails for a nail gun, be sure to verify the size of nails that the roofing nailer can handle. If you’re a professional, you should get a roofing nailer that can accept a wide variety of roofing nails so you can utilize it for any project. A decent nailer should be able to handle a variety of thicknesses ranging from 7/8″ to 1.75″. It’s possible that a roofing nailer isn’t the best equipment for the task and that a roofing staple gun is required.

Drive Depth: Is it simple to adjust?

The roofing nail gun must be able to vary the depth of drive with which the nail is placed since roofs are constructed of a range of materials. It’s beneficial if your roofing nailer offers a simple method to modify this to make nail gun repair work go more smoothly and efficiently. Some tools feature a scrolling wheel for adjusting the depth of drive, while others have a trigger system for doing so. It’s ideal to choose a nail gun with a tool-free adjustment feature like the Dewalt roofing nailer, since otherwise, it may be time-consuming and difficult.

Conclusion:

Choosing a decent roofing nailer may be challenging due to the fact that there are some powerful ones on the market with impressive promises. Our top seven picks demonstrate this, and they’re all reliable and capable of completing even the most challenging roofing projects. Because of how many tasks it may be used for, we believe the Bostitch Coil Roofing Nailer is the most flexible option and a favorite among homeowners.

This Bostitch roofing nailer is solid and fast, capable of driving 100 nails per minute. When the magazine runs empty, zero nail lockout prevents the nailer from firing. Then, for quick loading, utilize the unique single-action side canister. Open it, replace the coil of nails, and you’re good to go.

This nailer is unique in that it utilizes contact tip automatic firing. This is an excellent method for big projects because it allows you to cover a wide area by bouncing over the surface and firing the nail when the tip strikes the substance. To ensure that the nose is robust enough to survive this technique, it includes a carbide inlay.

You also get tool-free depth of drive adjustments with five pre-sets so you can make your choice fast and simply get back to work.

It doesn’t come with an air hose connection, but if you have a toolbox, you’re likely to have one on hand. It also doesn’t include a carrying case, which is cumbersome after you’ve completed the task. However, they are minor flaws.

To view our Amazon Associates Disclaimer, please click here.

The post 7 Best Roofing Nail Guns [2021 Reviews] appeared first on Luxury Home Remodeling | Sebring Design Build.

Did you miss our previous article…
https://www.amazingsidingstl.com/?p=515

[Cleaning Tips] 5 Major Taboos and Maintenance Methods of Induction Cooker

August 27, 2021

Home Design No Comments

More and more people love to use induction cooker, but sometimes they are accidentally spilling the soup or sauce on the cooker surface and fail to clean it immediately. After a period of time, there are dirt spots and burning spots, we may find it difficult to clean. We will teach you effective ways to clean the induction cooker and the maintenance of it.

Interior Design: Key Concept

Ways of Cleaning an Induction Cooker

When cooking with an induction cooker, it is recommended to simply clean it when there is residual temperature after each cooking to prevent food residues from staying on the glass surface and becoming a difficult-to-clean spot over time.

If there is stubborn dirt on the stove, there is a chance that the bottom of the pot scratched the glass surface of the induction cooker, causing dirt to accumulate, or the food will stay between the pot and the induction cooker and caused scorching. The following methods can be used for cleaning:

Use hot water and add white vinegar, soak the dirty area, and place a towel soaked in white vinegar on the dirty area for one hour. Allow the white vinegar to penetrate, prepare a scraper with a flat blade, and then scrape away the dirt. Keep the angle between the blade and the glass surface at about 30 degrees to remove most of the dirt.

In addition, there are some induction cookers cleaning detergents in the market, just like white vinegar, which also has the effect of softening stubborn dirt. You can also wait for a period of time to let it penetrate, then use a soft cloth or a specialized glass scraper to remove the dirt. Remember to pay attention to whether the cleaning detergents are suitable for your induction cooker and follow the instructions on the detergent to avoid any malpractice and result in damaging your induction cooker.

Interior Design: Lemonfridge Studio

Precautions for Maintenance Work of Induction Cooker

The induction cooker has a high input power. Like air conditioners and refrigerators, a separate and individual socket is required.The induction cooker has air inlets and outlets. When using the induction cooker, do not block the periphery and bottom, and keep the area well ventilated to prevent the heating panel of the induction cooker from overheatingSome induction cookers are equipped with fans to help the dissipation of heat. After cooking with the induction cooker, do not turn off the power immediately. Allow time for the bottom of the stove to dissipate heat and the heating panel to cool down.Utilizes pots and pans with lids during cooking to reduce the power used, which can also preserve the moisture of food as well as saving electricity.Clean the surface of the induction cooker frequently, to prevent dirt from accumulation, which will affect the function of the induction cooker and shorten its lifespan.

5 Major Taboos When Using Induction Cooker

If you want the induction cooker to have a longer lifespan, in addition to the above five maintenance precautions, there are five more taboos to pay attention to. The induction cooker is likely to be damaged if any one of the five taboos is committed.

Never use tin foil to cook on the induction cooker since the tin foil will melt and causing the induction cooker to melt as well.Do not place any food or utensils that are over 5kg on the induction cooker as it is the maximum loading capacity of the induction cooker.Do not put a hot lid on the induction cooker when cooking as the two will attract each other due to magnetization and may damage the induction cooker.When choosing pots and pans for the induction cooker, do not choose pots with uneven or rough bottoms. Scratching the cooker surface will make cleaning more difficult and affect the function of the induction cooker.In addition to selecting suitable pots and pans, do not frequently drag pots or gold-layered objects on the surface of the induction cooker when cooking. The glass surface will wear out and cause degradation.

The content and pictures of this article are provided and uploaded by the author. It does not represent the opinion of the company. If there are any copyright issues, please contact HKDecoman.

HKDecoman, now going global as Deco-Man, is a Hong Kong-based renovation platform which provides professional consultancy services and pioneers in the development of A.I. homeowner-engineer matching. We aim at educating the public about the art of home renovation and have our eyes on transforming the traditional renovation industry, bringing standardisation, transparency, convenience and automation to the business.

My Property

Project Info

My Contact Details

AgreementI acknowledge that the details provided in this form will be shared with Renonation.sg and the recommended interior design firms.AgreementI wish to receive home renovation inspiration, tips and guides from Renonation.sgPhoneThis field is for validation purposes and should be left unchanged.
gform.initializeOnLoaded( function() {gformInitSpinner( 5, ‘https://www.renonation.sg/wp-content/plugins/gravityforms/images/spinner.svg’ );jQuery(‘#gform_ajax_frame_5’).on(‘load’,function(){var contents = jQuery(this).contents().find(‘*’).html();var is_postback = contents.indexOf(‘GF_AJAX_POSTBACK’) >= 0;if(!is_postback){return;}var form_content = jQuery(this).contents().find(‘#gform_wrapper_5’);var is_confirmation = jQuery(this).contents().find(‘#gform_confirmation_wrapper_5’).length > 0;var is_redirect = contents.indexOf(‘gformRedirect(){‘) >= 0;var is_form = form_content.length > 0 && ! is_redirect && ! is_confirmation;var mt = parseInt(jQuery(‘html’).css(‘margin-top’), 10) + parseInt(jQuery(‘body’).css(‘margin-top’), 10) + 100;if(is_form){jQuery(‘#gform_wrapper_5’).html(form_content.html());if(form_content.hasClass(‘gform_validation_error’)){jQuery(‘#gform_wrapper_5’).addClass(‘gform_validation_error’);} else {jQuery(‘#gform_wrapper_5’).removeClass(‘gform_validation_error’);}setTimeout( function() { /* delay the scroll by 50 milliseconds to fix a bug in chrome */ jQuery(document).scrollTop(jQuery(‘#gform_wrapper_5’).offset().top – mt); }, 50 );if(window[‘gformInitDatepicker’]) {gformInitDatepicker();}if(window[‘gformInitPriceFields’]) {gformInitPriceFields();}var current_page = jQuery(‘#gform_source_page_number_5’).val();gformInitSpinner( 5, ‘https://www.renonation.sg/wp-content/plugins/gravityforms/images/spinner.svg’ );jQuery(document).trigger(‘gform_page_loaded’, [5, current_page]);window[‘gf_submitting_5’] = false;}else if(!is_redirect){var confirmation_content = jQuery(this).contents().find(‘.GF_AJAX_POSTBACK’).html();if(!confirmation_content){confirmation_content = contents;}setTimeout(function(){jQuery(‘#gform_wrapper_5’).replaceWith(confirmation_content);jQuery(document).scrollTop(jQuery(‘#gf_5’).offset().top – mt);jQuery(document).trigger(‘gform_confirmation_loaded’, [5]);window[‘gf_submitting_5’] = false;wp.a11y.speak(jQuery(‘#gform_confirmation_message_5’).text());}, 50);}else{jQuery(‘#gform_5’).append(contents);if(window[‘gformRedirect’]) {gformRedirect();}}jQuery(document).trigger(‘gform_post_render’, [5, current_page]);} );} );>

Did you miss our previous article…
https://www.amazingsidingstl.com/?p=538

7 Best Sheet Metal Shears [2021 Reviews]

August 24, 2021

Home Improvement No Comments

Featured Image: Best Reviews

When it comes to making clean, straight cuts, electric metal shears are a must-have item in your toolkit. Because there are so many electric metal shears on the market nowadays, you may be confused about which one to purchase. Allow us to guide you on the proper path, beginning with our suggestions for the finest metal shears available.

Below are the top seven best sheet metal shears in the market today.

.fusion-fullwidth.fusion-builder-row-1 { overflow:visible; }1.>

DEWALT Metal Shear, Swivel Head, 18GA (DW890) , Yellow The metal shear has powerful, 5 amp, all ball bearing motor for long lifeThe electric metal shear head swivels 360 degree for cutting convenienceThe electric metal shear cuts 7/32-inch strip, which continuously curls out of cutting area for clear line of sightVariable speed dial allows user to vary speed for specific materials and various applications (100-350 spm)Cuts radius of 5-1/2-inch and largerCheck Price Below

Buy on Amazon>

2.>Sale

Milwaukee 6852-20 18-Gauge Shear Mpn: 6852-20Country of manufacture: ChinaManufacturer: Milwaukee6.8 amp Milwaukee motorHex WrenchCheck Price Below

Buy on Amazon>

3.>

WEN 3650 4.0-Amp Corded Variable Speed Swivel Head Electric Metal Cutter Shear Pressure sensitive trigger cuts anywhere from 0 to 2500 strokes per minuteAttack up to 20 gauge stainless steel and 18 gauge sheet metalLightweight design limits fatigue during operationUtilizes a powerful 4-amp motor, curling the metal as it cutsSwiveling head rotates a full 360 degrees to meet the needs of any projectCheck Price Below

Buy on Amazon>

4.>Sale

Genesis GES40 4.0 Amp Corded Swivel Head Variable Speed Electric Power Metal Shear, original version Quickly cuts metal roofing, flashing, and other sheet metal up to 14 gauge – Compare the Genesis metal shear to other drill attachment Shears that can only cut 20 gauge Sheet metal!Powerful 4.0 amp motor360° swiveling head for cutting control and convenience -cut circles and curves with the Genesis electric metal shearVariable speed (0-2500) SPM for versatility in cutting a variety of materials – cuts through sheet metal up to 14 gauge in thickness!Three blade cutting system reduces metal deformation – experience smooth cuts EVERYTIME!Check Price Below

Buy on Amazon>

5.>

Gino Development 01-0101 TruePower 18 Gauge Heavy Duty Electric Sheet Metal Shear Tin Snips Cutter Nibbler Country Of Origin: ChinaModel Number: 01-0101Item Package Dimension: 14.0″ L x 3.0″ W x 7.0″ HItem Package Weight: 6.0 lbCheck Price Below

Buy on Amazon>

6.>

Wild Edge Electric Metal Shear, 5.0 Amp Variable Speed Swivel Head 14 Gauge Electric Metal Shear Variable speed: (0-2700) strokes per minute in cutting a variety of materialsCuts up to 15 gauge stainless steel and 14 gauge sheet metalPowerful 5. 0 amp motor360 Degree swiveling head for cutting control and convenienceTwo finger trigger and lock-on buttonCheck Price Below

Buy on Amazon>

7.>

Makita JS1602 16 Gauge Shear Powerful 3.3 AMP motor delivers 4,000 SPM for the most demanding applicationsSmaller circumference barrel grip (only 2-1/4”) for added comfortRefined design at only 3.4 lbs. for increased controlLock-on slide switch for continuous operationBuilt-in thickness gauge for added convenienceCheck Price Below

Buy on Amazon>

1. DEWALT DW890 Metal Shear

Pros:

AffordablePower lockWith a solid bearing based 5A motorVersatile speed

Cons:

Tough to work w/ when it comes to thick materials

Sebring Tip:

The DeWalt’s DW890 Metal Shears are a pair of double-sided electric shears. On the metal workpiece, they cut a thin 7/32-inch strip out of it. This strip curls as you cut, keeping it out of the way and allowing you to continue working without having to stop to remove the extra material every time you cut.

There are ball bearings in the 5-amp motor, which reduce friction and assist guarantee the motor’s long life and excellent quality. Also, the speed may be adjusted from 100 to 350 spm with the help of a handy dial. In addition to the 360° rotating head, the trigger may be kept in the on position to reduce user fatigue while cutting lengthy strips.

2. Milwaukee 6852-20 18-Gauge Shear

Pros:

Powerful 6.8A motorTrigger that can be adjusted for speedDesign that is easy to transport

Cons:

ExpensiveCan have a hard time with corrugated sheet

Sebring Tip:

Milwaukee’s 6852-20 18-Gauge Shear is a high-end model. It features a 6.8 Amp motor that can cut 1/18-inch sheet steel or 1/20-inch stainless steel. The waste curl has a cutting power of up to 2,500 spm and measures 13/64 inches.

The variable speed, like the WEN, is regulated by how hard the trigger is squeezed. The head swivels up to 360 degrees, which is a common feature in these gadgets but should be regarded as a must-have. The gadget is a little over four pounds, owing in part to a magnesium gearbox, and it features a rubber, tactile grip that helps to minimize user fatigue and offer a pleasant experience.

3. WEN 3650 Electric Metal Cutter Shear

Pros:

Low-costUp to 2,500 spm may be delivered via a pressure-sensitive triggerPower switch that can be locked on

Cons:

The motor is just 4 amps

Sebring Tip:

This model is a corded electric shear. It features a 4-amp motor that can go from 0 to 2,500 spm.

While other devices have a changeable dial, the WEN uses haptic pressure, which means that the harder you hold the trigger, the more power you receive, and the lighter you pull, the less power you get. Although it isn’t as precise as other methods, there is something to be said for the manual aspect of determining how much power you need. The WEN’s 4-amp motor isn’t quite as strong as the DeWalt’s, but it’s still one of the finest electrical metal shears for the money. It can cut stainless steel and sheet metal up to 20 gauge and 18 gauge. The twin blade design cuts 1.4-inch ribbon and weighs just 4.7 pounds, which means it is simple to hold and operate even over extended periods of time, reducing user fatigue.

4. Genesis GES40 Variable Speed Electric Power Metal Shear

Pros:

Budget-friendlyMetal deformation is reduced because of three-blade systemSwitch that locks on

Cons:

Obstacles in the use of corrugated sheetBetter at doing straight lines than corners

Sebring Tip:

With a 4-amp motor, the Genesis GES40 Variable Speed Electric Power Metal Shear can cut sheet metal up to 14 gauge. It features variable speed settings ranging from 0 to 2,500 rpm, which are controlled by the sensitive trigger.

The Genesis weighs 5.4 pounds, which is a bit more than some other units, but it’s still light and simple to use. It also includes a lock-on switch, allowing you to move the workpiece and hold the shear in a more comfortable position.

5. Gino Development 01-0101 TruePower Electric Sheet Metal Shear

Pros:

No waste with a single bladeWill cut curves as well as plastic

Cons:

The power supply is just 3.5 ampsSingle-speedThe workpiece is distorted by a single blade

Sebring Tip:

The Gino Development 01-0101 TruePower Electric Sheet Metal Cutter has just one blade. This implies the Gino will cut through metal without producing waste, but the metal will bend and deform as the blade passes through it.

As a result, if you’re going to deal with the leftover metal and need it to stay flat, these shears aren’t the greatest option. A single blade shear is able to cut corners, but since it has a large turning circle, don’t anticipate sharp edges.

6. Wild Edge SEMS5A Electric Metal Shear

Pros:

5-amp motor at a low cost2,700 spm

Cons:

Straight lines are better

Sebring Tip:

You can get the Wild Edge SEMS5A Electric Metal Shear for about the same price as the Genesis. It features a more powerful 5-amp motor that can achieve a cutting speed of 2,700 spm, but this won’t make a significant difference while cutting. It can cut 15-gauge stainless steel and 14-gauge sheet metal, and it features a 360-degree swiveling head to enable for some movement & curve in your cut.

7. Makita JS1602 16 Gauge Shear

Pros:

Can cut shapes and curvesComfortable and lightweight

Cons:

The 4-amp motor isn’t as powerful as it should beNo variable speed

Sebring Tip:

The Makita JS1602 12 Gauge Shear is a single-blade model with a high price tag. It features a 3.4-amp motor with a single cutting speed of 4,000 spm and low power consumption. When you first turn it on, it would seem too strong, and even when fully functioning, it will feel too powerful.

The Makita, on the other hand, is light and pleasant to operate, so it cuts sheet and stainless steel up to 16 gauge with little user fatigue. Because this is a single-blade cutting model, there is no waste, but one-half of the cut material will be distorted and possibly unusable.

The Best Metal Shears Buying Guide

You’re probably familiar with a metal shear if you deal with sheet metal or metal components in general. With this tool, you can swiftly cut through metal components without exerting too much effort. Working with sheet metal becomes very difficult, if not impossible, without this equipment.

If you want to be productive in the workshop, you need to choose the finest electric metal shear. However, if you aren’t well-versed in the subject, finding the appropriate product may be difficult. That’s where we can help.

As previously said, we have included some of the finest metal cutting shears in this post. You will differentiate them easily now that we’ve discussed their main features and choices. You should have a good understanding of metal shears in general after this.

However, if you want to learn more about metal shears, we’ve put up a comprehensive purchasing guide especially for you. This buying guide covers a wide variety of metal shears-related topics and considerations. In other words, if you read this buying guide all the way to the conclusion, you’ll be able to choose the ideal metal scissors for you:

Type of Tool

Metal shears come in various sizes and shapes since they are so helpful for cutting metal sheets and items. As a result, the different models available vary in terms of capability. Various metal shears are suitable for distinct purposes, in addition to having other characteristics.

Some are stand-alone power tools with built-in electric motors, while others are accessories for your current power tools. You may choose one of them based on your needs for simplicity of use and power.

Type of Power

If you choose freestanding power shears with an integrated electric motor, you may choose from various power types. Even though all powered metal shears are powered by electricity, the energy source varies depending on the model.

Some are corded versions that connect directly into a power outlet, while others are cordless and run on battery power. Corded versions are usually more powerful, while cordless ones are more convenient for portable use.

Power Rating

Whether you’re purchasing a corded or cordless power tool, it’s critical to be sure it’s strong enough. If you wish to cut thick metal sheets, this is particularly true for metal shears. As a result, the power rating for the majority of metal shears models may be found.

This power rating is expressed in amps for corded versions and is either four amps or five amps. Cordless metal shears, on the other hand, have a power rating of 12 or 20 volts. In each of these instances, the greater the rating, the better the performance.

Rating of the Gauge

Checking the gauge rating of your metal shears is another method to get a sense of their performance. This informs you what metal sheet thicknesses are supported or compatible with the metal shears you’re using. Some metal shears have a 14-gauge gauge rating, whereas others have a 20-gauge gauge rating.

When comparing the two gauge ratings, the 14-gauge grade is superior for cutting thick metal sheets. In other words, thinner metal sheets come from a higher gauge rating, whereas thinner metal sheets result from a lower gauge value.

Warranty

Any particular metal shears model’s guarantee length is just as essential as any other element or detail discussed in our purchasing guide. This is because if you want to use your metal shears for a long time, you should get metal shears with a lengthy guarantee period.

Almost every metal shear on the market comes with a two-year guarantee. However, in certain instances, you may get somewhat better versions with a 5-year warranty.

What To Look For When Buying the Best Metal Shears

Metal shears aren’t designed for a single task. Nonetheless, depending on the speed controls, their performance and function change.

The blade material: Make sure you get a metal shear with a sturdy blade that can withstand the materials you’ll be cutting. This will save you money by keeping you from having to replace the blade frequently. Furthermore, a metal shear with a powerful blade will allow you to cut quickly and smoothly without becoming fatigued.

The metal shear’s speed controls are the next item you should think about. It is suggested that you use a high-speed shear to avoid any unnecessary slowdowns while operating. High-speed shears improve cutting and finishing by increasing stroke speed.

Safety: If the tool you’re using doesn’t have the appropriate safeguards and safety features, shearing may cause damage or injury. Look for warning labels or point-of-operation guards on the metal shear you’re going to buy to keep you safe when shearing. To increase your safety even further, it’s a good idea to get some instruction before using the machine, particularly if it’s your first time.

Conclusion:

During our testing, we discovered that the DeWalt DW890 Metal Shear is reasonably priced, powerful, and has all of the features you need from a tool of this kind. If you’re on a budget and require a set of shears with variable power settings and a high power output, the WEN 3650 Electric Metal Cutter Shear is a great choice.

The DeWalt metal shear would be ideal for basic shearing at home. It has a strong 5.0 Amp motor with a ball bearing for added longevity. This metal shear then cuts a 7/32 inch strip that bends out from the cutting region, giving you a clean line of sight. This product is very long-lasting and simple to use. It can cut a radius of up to 5-1/2 inches, and its head swivels 360 degrees for easy cutting.

Because this device is lightweight (weighing just 5.0 lbs), you may use it for longer periods with less hand fatigue. It can cut through 20-gauge stainless steel and 18-gauge mild steel, among other materials. Its variable speed dial allows you to adjust the speed for different applications and materials.

To view our Amazon Associates Disclaimer, please click here.

The post 7 Best Sheet Metal Shears [2021 Reviews] appeared first on Luxury Home Remodeling | Sebring Design Build.

Did you miss our previous article…
https://www.amazingsidingstl.com/?p=494

Aug 2021 BTO Analysis: Toh Guan Grove at Jurong East

August 24, 2021

Located along Toh Guan Road, this Jurong East BTO launched in August 2021 is situated near an upcoming MRT station along the future Jurong-Region Line. We visited the site for Toh Guan Grove to check out its surroundings and to see what else this BTO has to offer.

t a glance

BTOToh Guan GroveLocationAlong Toh Guan RoadNo. of units569Unit types2-room Flexi, 3-, and 4-room flatsNo. of blocks3No. of floors10 to 37 storeysSite facilitiesRetail shops and a supermarketPublic transportationNearest MRTs: Toh Guan station on the Jurong Region Line (estimated completion by 2028 and ~5-min walk) and Jurong East Interchange (~14-min walk)
Buses: Bus stops are located on Toh Guan Road. Plenty of buses service this route taking you to areas like Bishan, Habourfront, Queenstown, Orchard, Bukit Timah and PioneerSurrounding amenitiesMalls: IMM, JEM, Westgate and Jcube (~11- to 17-min walk)
Hawker centre/Wet market: Yuhua Village Market and Food Centre (~14-min walk)
Other eateries: Coffee shops at blocks 267A, 282A and 286E Toh Guan Road, all surrounding the BTO
Parks: Located next to a PCN routeSchools within 1km (estimated)Fuhua Primary School, Yuhua Primary School, Bukit View Primary School, Jurong Primary School, Keming Primary School, LianHua Primary School and Princess Elizabeth Primary SchoolEstimated completion dateFirst quarter of 2026

The site

We headed down to the site during a weekend afternoon. Located away from the main roads, Toh Guan Grove sits in a relatively serene spot. However, because of the large number of public housing and coffee shops surrounding the site, we witnessed quite a high footfall.

Site for Toh Guan Grove BTO, taken from block 265.

Site for Toh Guan Grove BTO, taken from Toh Guan Road.

There are also quite a number of buses plying Toh Guan Road. This likely means that traffic will get quite busy along this road, especially during peak periods when the bus frequencies go up.

Toh Guan Road.

As mentioned before, we saw three coffee shops surrounding Toh Guan Grove alone so you will have plenty of options for dinner. One is located just opposite the site at block 286E, while the other is situated at 282A next to the roundabout adjacent to the site. The third is located at neighbouring block 267A.

Plenty of coffee shops surrounding the Toh Guan Grove BTO.

Within Toh Guan Grove, you will also see a supermarket and other retail shops. IMM is also less than a 15-min walk, so you will get access to other F&B and retail options as well as the Giant hypermarket. In terms of convenience, this BTO is pretty attractive.

This BTO will also see Toh Guan MRT station located just a 5-min walk away from it. The station will be on the future Jurong-Region Line (JRL) and is scheduled for completion in 2028 under the second phase of construction.

Toh Guan Grove BTO will be completed in 2026, so you will have about two years before you get to enjoy the new station. Once it’s up though, the station will be just one stop to Jurong East Interchange, which intersects with the North-South and East-West lines. For now, the Jurong East station is less than a 15-min walk away, but if you prefer not to walk, there are several buses along Toh Guan Road that take you to the station.

The area is also pretty convenient for drivers. Drivers will have to get through just a couple of traffic lights to hit major expressway PIE.

What unit should you go for at Toh Guan Grove?

Site Map for Toh Guan Grove BTO.

2-room flats

Unlikely to get afternoon sun: Stacks 275, 277, 321 and 323.

Best for privacy: Stacks 277 and 321.

Best for unblocked views: 279 and 281 (above 5th storey); 283; 317, 319, 321 and 323 (above 21st storey); 313, 315; 303 and 305 (above 5th storey).

Traffic noise: Avoid stacks 279, 281, 283, 285, 287 and 289 facing Toh Guan Road, which can get quite busy as this road leads to major expressways and also sees a high number of buses plying this route.

Noise from human activity: If you don’t want to be disturbed by a flurry of activity surrounding the retail shops and the supermarket on site, avoid stacks at Block 289A. On the plus side for the stacks in this block though is getting to those amenities really quickly. Stacks 313, 315, 317 and 319 are also facing the pavilion as well as the playground and fitness corners, which can get quite noisy because of the higher concentration of human activity.

Rubbish chutes: Avoid stack 287 and 289 located near the rubbish chutes and the bin centre.

3-room flats

Unlikely to get afternoon sun: Stacks 273, 297 and 325.

Best for unblocked views: The inward-looking stacks, 271, 273, 297 and 299. If you wish to go for stack 325, get a unit above the 21st floor since it’s looking towards block 284, which is 21 storeys high.

Away from human activity zones: Stack 325.

Near the lifts: Avoid stacks 271 and 297 if you don’t want your front door to be located near the lifts. Privacy is usually scant in these areas, since people waiting for the lifts tend to look into your units.

4-room flats

Unlikely to get afternoon sun: Stack 295.

Best for privacy: Stacks 293 and 309.

Best for unblocked views: 291 and 293 (above 5th storey); 301 (above 10th storey); 307 (above 21st storey); 309.

Noise from human activity: Avoid stacks 295 and 311 if you don’t want to be facing the pavilion, playgrounds and fitness corners. These areas have high concentration of human activity. Avoid stack 301 if you don’t want to be located near the bin centre or facing the service road behind the supermarket and shops where a lot of loading/unloading is going to take place.

Still have questions on BTO Toh Guan Grove? Let us know in the comments!

My Property

Project Info

My Contact Details

AgreementI acknowledge that the details provided in this form will be shared with Renonation.sg and the recommended interior design firms.AgreementI wish to receive home renovation inspiration, tips and guides from Renonation.sgNameThis field is for validation purposes and should be left unchanged.
gform.initializeOnLoaded( function() {gformInitSpinner( 5, ‘https://www.renonation.sg/wp-content/plugins/gravityforms/images/spinner.svg’ );jQuery(‘#gform_ajax_frame_5’).on(‘load’,function(){var contents = jQuery(this).contents().find(‘*’).html();var is_postback = contents.indexOf(‘GF_AJAX_POSTBACK’) >= 0;if(!is_postback){return;}var form_content = jQuery(this).contents().find(‘#gform_wrapper_5’);var is_confirmation = jQuery(this).contents().find(‘#gform_confirmation_wrapper_5’).length > 0;var is_redirect = contents.indexOf(‘gformRedirect(){‘) >= 0;var is_form = form_content.length > 0 && ! is_redirect && ! is_confirmation;var mt = parseInt(jQuery(‘html’).css(‘margin-top’), 10) + parseInt(jQuery(‘body’).css(‘margin-top’), 10) + 100;if(is_form){jQuery(‘#gform_wrapper_5’).html(form_content.html());if(form_content.hasClass(‘gform_validation_error’)){jQuery(‘#gform_wrapper_5’).addClass(‘gform_validation_error’);} else {jQuery(‘#gform_wrapper_5’).removeClass(‘gform_validation_error’);}setTimeout( function() { /* delay the scroll by 50 milliseconds to fix a bug in chrome */ jQuery(document).scrollTop(jQuery(‘#gform_wrapper_5’).offset().top – mt); }, 50 );if(window[‘gformInitDatepicker’]) {gformInitDatepicker();}if(window[‘gformInitPriceFields’]) {gformInitPriceFields();}var current_page = jQuery(‘#gform_source_page_number_5’).val();gformInitSpinner( 5, ‘https://www.renonation.sg/wp-content/plugins/gravityforms/images/spinner.svg’ );jQuery(document).trigger(‘gform_page_loaded’, [5, current_page]);window[‘gf_submitting_5’] = false;}else if(!is_redirect){var confirmation_content = jQuery(this).contents().find(‘.GF_AJAX_POSTBACK’).html();if(!confirmation_content){confirmation_content = contents;}setTimeout(function(){jQuery(‘#gform_wrapper_5’).replaceWith(confirmation_content);jQuery(document).scrollTop(jQuery(‘#gf_5’).offset().top – mt);jQuery(document).trigger(‘gform_confirmation_loaded’, [5]);window[‘gf_submitting_5’] = false;wp.a11y.speak(jQuery(‘#gform_confirmation_message_5’).text());}, 50);}else{jQuery(‘#gform_5’).append(contents);if(window[‘gformRedirect’]) {gformRedirect();}}jQuery(document).trigger(‘gform_post_render’, [5, current_page]);} );} );>

Aug 2021 BTO Analysis: Towner Residences at Kallang Whampoa

August 16, 2021

Home Design No Comments

With just 316 units, Towner Residences at Kallang/Whampoa is the smallest BTO development launched in Aug 2021. Sandwiched between two schools and an expressway, this BTO may not be all that conducive at first glance. But on closer inspection, it does have a few redeeming qualities. We take a look at the site and see what stacks to look out for if you decide to go for a unit there.

t a glance

BTOTowner ResidencesLocationAlong Towner RoadNo. of units316Unit types3- and 4-room flatsNo. of blocks1 + 1 (block of rental flats)No. of floors32 to 40 storeysPublic transportationNearest MRT: Boon Keng (~8-min walk)

Bus stop along Towner RoadSurrounding amenities within walking distanceHawker Centre: Whampoa Makan Place (~8-min walk)
Supermarkets: Sheng Siong at 108 McNair Road (~4-min walk), NTUC Fairprice at 80 Lor Limau (~8-min walk) and a future supermarket at Towner Crest BTO.Schools within 2km (estimated)Bendemeer Primary School, Hong Wen School, Farrer Park Primary School, Pei Chun Public School, St Andrew’s Junior, St Joseph’s Institution JuniorEstimated completion date4th quarter of 2026

The site

Site for Towner Residences. Surrounded by a couple of older flats and low-rise private housing as well as two schools.

We visited the site on a weekday afternoon and found the area to be a hive of activity. School had just finished, and there were numerous pick-ups happening along Towner Road. Traffic also tends to be pretty congested during drop-off and pick-up hours, so make sure you account for this if you are getting a flat here.

Pick-ups and drop-offs happening at Hong Wen School (left of image). Towner Residences is to the right of image.

Along Towner Road.

Just opposite, traffic from the Central Expressway (CTE) was roaring loudly. Towner Residences is definitely not one for those who like their peace and quiet.

In terms of convenience, the nearest MRT station, Boon Keng, is just a 7-min walk away. It’s not the shortest distance, when you compare with the other BTOs in the same area that were launched earlier like Towner Crest, but it’s still walkable.

What’s significant about this is that Boon Keng MRT station is just two stops to Little India interchange, which gets you to the Downtown Line, and three stops to Dhoby Ghaut Interchange, which gets you to two other MRT lines. Looking at connectivity, this is pretty decent.

Foodies, you will be able to walk to the popular Whampoa Makan Place, which has a wide array of (famous) hawker fare and a wet market. It’s just past an overhead bridge across the CTE. Nearer to home, there’s a small coffee shop located at block 122 down the road and a future eating house at BTO Towner Crest (BTO’s estimated completion in 3rd quarter of 2023). Otherwise, there are a few eateries, fast-food places and a hawker centre located next to Boon Keng MRT.

For supermarkets, there’s a Sheng Siong nearby, an NTUC Fairprice located close to Whampoa Makan Place as well as a future supermarket at Towner Crest.

No major malls within walking distance. But City Square Mall is just one MRT stop away at Farrer Park MRT station.

Which unit should you go for at Towner Residences?

3-room flats

You get to choose from stacks 231, 233 and 235 for 3-room flats.

Stack 231 is located right next to the pavilion and the car park. You are likely going to face issues with noise, car fumes and the revving of engines if you are situated on a lower floor. However this is also the best stack for privacy, since it’s a corner unit.

Stacks 233 and 235 are facing Hong Wen School, so you are definitely going to experience the noise from being located near a school. This isn’t a major issue if you aren’t at home for most part of the day, but if you work from home, consider if this is something you can tolerate.

There is one advantage of a school-facing stack however. The school buildings are estimated to be about five to six storeys high. Get a unit on the higher floor to get unblocked views if you are at stacks 233 and 235.

Stack 235 is the best choice for no afternoon sun, while stack 231 will experience the full brunt of it. Stack 233 will also receive some afternoon sun coming in from the northwest direction from March to September.

4-room flats

Stacks 219, 221, 223, 225, 227 and 229 are available for those who are looking for a 4-room unit. There are two different layouts available for 4-room flats.

Stacks 221 and 223 features a boxier layout, with the communal areas located in the middle of flat and one of the common bedrooms located on the opposite end.

The other stacks feature a more conventional BTO layout, with all the bedrooms to one side.

There are pros and cons for each. Here’s a summary:

Boxy LayoutConventional LayoutPros*More windows in the master bedroom

*Ample foyer area for shoe storage

*More privacy for one of the common bedrooms

*Possibility of hacking away the common bedroom next to the master bedroom to create an extended bedroom with a walk-in closet

*More spacious common bathroom*Eat-in kitchen design: Dining area located near the kitchen

*Open-concept kitchen

*More empty walls to do up more kitchen storageCons*Entrance to common bathroom located near kitchen

*Not possible to have wet and dry kitchen design

*Common bathroom entrance far from the two common bedrooms

*Household shelter entrance in kitchen means one less wall you can use*Smaller common bedrooms

*Conventional layout, not as unique

*Lack of foyer space

*Fewer windows

*Wasted walkway space to the bedrooms

If you prefer having a more open-ended kitchen with more room to be creative, go for the conventional layout. Otherwise, the boxy layout is more refreshing as far as BTOs go and feature bigger bedrooms and less wasted space.

No afternoon sun: 229 is a north-south facing stack and is the best stack if you don’t want to experience any afternoon sun. East-facing stacks 219 and 221 will also not get any afternoon sun, but they will experience the morning sun.

Privacy: Go with corner stack 223 for privacy. Avoid stacks 225 and 227 if you can, since they are close to the lifts as well as facing the rubbish chutes directly.

Unblocked views: For stacks 223, 225, 227 and 229, get a unit on a higher floor (above the 25th storey) for unblocked views. For stacks facing the school, 219 and 221, get a unit that is above the 5th or 6th storey for unblocked views.

Noise: There isn’t exactly a conducive and quiet 4-room stack. Stacks 219 and 221 are facing the school, stacks 223, 225 and 227 are facing the playgrounds and fitness corners and stack 229 is located near the car park. If we have to choose, stack 223 is located just a bit further from the activity zones, so you might experience less noise at this stack.

Park views: The master bedroom and one of the common bedrooms at stacks 221 and 223 will look into the nearby park (currently under construction), putting those extra windows to good use.

Park, to the left of image, is still under construction.

Still got a question on Towner Residences? Let us know in the comments below or hit us up on our social media platforms!

My Property

Project Info

My Contact Details

1950s wallpaper — 52 new designs from Bradbury & Bradbury

August 13, 2021

If you want to embrace a 1950s look in your mid century home, adding a splash (or more) of 1950s wallpaper is an important tool in your tool box. I’m always entranced with historic designs, so it’s exciting indeed to see Bradbury & Bradbury come out with this new collection of 1950s wallpapers. These are…

The post 1950s wallpaper — 52 new designs from Bradbury & Bradbury appeared first on Retro Renovation.

Did you miss our previous article…
https://www.amazingsidingstl.com/?p=464

The Detailed CWP Cabinetry Guide

August 13, 2021

Don Lake, the company’s founder, started it all in 1981 with the simple goal of providing excellent jobs to excellent people. Kevin and Caroline Gray, the current proprietors, maintain this concept by recruiting and training artisans enthusiastic about producing high-quality goods. To ensure that their customers have the best possible experience, CWP cabinetry dealers need hardworking and bright individuals to work in the store, central office, and showrooms.

Custom Wood Products is based in the Midwest and is established on a foundation of hard work, trust, and workers that take pleasure in producing the finest products available. At their 100,000-square-foot plant in St. Marys, Kansas, they are consistently implementing new technologies to improve their measurement and cutting processes for maximum accuracy. No one can do it better than their artisans when it comes to construction and assembly.

Define Your Style

With fully bespoke cabinets, you have complete design flexibility. Unique features, finishes, forms, and designs are available, in addition to custom sizes. Each client’s work is custom-made, making each order unique. Custom Wood Products combines the skills and workmanship of a traditional carpenter with the trustworthiness of a business that has shown it will stand behind its product for many years.

Make Your Dream A Reality

All approved Custom Wood Products designers have been chosen because they individually represent CWP’s ideals and have received specific training in kitchen and bath design, guaranteeing that customers enjoy the finest possible experience.

Lifetime Quality

For as long as you have your cabinetry, CWP backs it up with a lifetime guarantee. We can keep this guarantee because we take pleasure in utilizing high-quality components and constructing a high-quality product. We want our goods to last a lifetime, so you can be certain that if an issue arises, we will be there to help.

The CWP Process

Their professionally qualified designers will:

Work with you one-on-one to plan every aspect of your area.For a perfect fit, measure your area.They are accessible for consultation at any time throughout the process, from design to installation.

How To Choose The Best Cabinets From CWP Cabinetry

Your CWP cabinetry pro kitchen is essential. They are not only crucial in the overall dynamic of the space, but they are also vital to its function. Your cabinets keep your countertops and workstations tidy by offering enough storage space for your fantastic wine glass collection or even your extensive collection of cheese graters.

Choosing new cabinets may be difficult since selecting a design that won’t go out of style soon. CWP cabinetry pricing is one of the most significant expenditures you’ll make in your kitchen renovation, so you’ll want to be sure you’ll be pleased with them for many years to come.

Here is a quick rundown of all the things you should think about when you start looking for new kitchen cabinets:

Number Of Cabinets

The quantity of cabinets you choose is critical since it has a significant effect on the appearance and feel of your kitchen. Minimalist cabinets and open shelves have been popular in recent years. It’s essential to note that this is a fad and that minimalist cabinets and storage units may not be the best practical decision for your kitchen unless you have a stack of five Anthropologie plates and nothing else.

Similarly, cramming your kitchen with too many cupboards may make it seem cramped and crowded. Only having floor-to-ceiling cabinets on every side of the room is worse than not having any place to keep your kitchen items.

Material Selection

When there are so many designs to select from, how can you choose the appropriate materials for your kitchen? The first decision is whether you want to go with a traditional wood style or one of the more contemporary styles. Glass may be incorporated into your cabinets, or you can choose cabinets made of colored laminate.

You may also choose a style created from environmentally friendly materials. Cabinets constructed from recycled wood, salvaged wood, wood veneer, or even renewable wood like bamboo are examples of eco-friendly materials.

Shaker vs. Flat Panel vs. Inset

The design of your cabinet doors may or may not add to the function of your kitchen, but it will alter the dynamic of your space. Most individuals install three kinds of cabinets; however, if you want to stand out from the crowd, you also have additional choices.

The inset cabinet style is a timeless design that will stay fashionable and attractive for decades. It is, however, typically the most costly type to install. Because the cabinets have visible hinges, they must be properly sized and cut to be functional. Although they are pricey, their worth is evident when you are still receiving compliments on them after 20 years.

Shaker-style cabinet doors are a tried and proven design that fits into nearly any house if you want to opt for a traditional appearance. These cabinet doors are the most popular in today’s kitchens. The design’s clean lines and simplicity make it a great addition to virtually any kitchen since it goes with everything. Shaker cabinets may be used to create virtually any design, whether you want to go contemporary or go back to a farmhouse-style kitchen.

In contemporary ultra-modern kitchens, flat-panel cabinets have become the go-to cabinet design. They have a clean, modern appearance that is ideal for a futuristic or contemporary aesthetic. The flat panel design is available in both wood and laminate. This design is especially attractive since, depending on your budget, you can transform it from an IKEA showroom appearance to an ultra-high-end one. CWP Euro full access cabinetry is also perfect!

Hardware Selection

As if picking the correct quantity, material, and style of cabinets weren’t difficult enough; you also had to choose the right hardware to go with them. These accent elements, believe it or not, make a significant contribution to the overall design of your cabinets.

Choosing hardware with design elements that are similar to your cabinets is a solid rule of thumb. For example, if you’ve selected flat-panel cabinets for a contemporary kitchen, you’ll want to choose complementary hardware that matches your cabinets’ minimalist and clean appearance.

When you sum everything up, there are many factors to consider when designing your new kitchen cabinets. However, being the most costly component of your project and the main point of your kitchen, your cabinets demand your time and attention. If your designers are color-blind, seek the assistance of a reputable cabinet builder or kitchen specialist, who makes it their job to determine which drawer pulls match best with which cabinet color.

Making The Most Of CWP Cabinetry: Other Factors To Consider

Cabinets are essential components in kitchen design since they are typically one of the main focus points of the room. There are many different designs of kitchen cabinets on the market that it may be difficult to choose the right one for your home. Any homeowner would like to make the best decision for their kitchen and avoid purchasing kitchen cabinets that do not complement the area or are insufficiently practical. If you’re not sure what kind of kitchen cabinets you want for your area, it’s simple to make a mistake. How can you choose the perfect kitchen cabinets to improve the looks of your kitchen, offer the practical features you want, and inspire you to embark on a kitchen remodeling project? Take a look at these four helpful hints for selecting the best kitchen cabinets for your house.

Keep The Kitchen Style In Mind

Traditional, contemporary, and transitional are popular kitchen styles, but within those categories, there are many distinct subtypes. You should choose complementary cabinets that suit the design of your kitchen. The color palette of your kitchen should be reflected in the cabinets you choose. Consider how the cabinet doors will go in with the rest of your kitchen’s decor. The layout of your kitchen and the amount of space available are other variables to consider. Kitchens with limited space benefit from space-saving cabinetry. Euro cabinetry by CWP custom wood products can be customized based on your preferences.

Choose The Best Material

While you want all of your kitchen design components to flow together, your personal requirements should be your guide when selecting the right cabinet material. Kitchen cabinets come in a variety of materials, with wood and wood-like materials being the most common. You may select from hardwood, fiberboard, plywood, stainless steel, metal, melamine, or thermofoil, among other options. Hardwood is generally the finest choice if you want a high-quality cabinet material. The substance used in particleboard is usually of inferior grade.

Cabinet Design Shouldn’t Be Overlooked

When purchasing new cabinets, the doors get a lot of attention. They come in a wide variety of finishes, designs, and colors. Before choosing a cabinet design, consider the overall aesthetic of your kitchen and perhaps your whole home. Unless you want to create something unique and eccentric, the general style of your kitchen area and the cabinets should complement each other. Because of its classic, basic, and practical qualities, Shaker design kitchen cabinets are a popular option. They are also quite adaptable and may be used in both classic and contemporary kitchens.

im For Aesthetics And Functionality

You want your kitchen cabinets to appear nice while still providing the functionality you need. As a result, beauty and practicality are important considerations when choosing cabinets. Whether your kitchen is big or little, the finest cabinets will improve the appearance and feel of your room while also providing practical value. Design/style, color, finish, and even hardware are all aspects of aesthetics. You may pick between conventional cabinets with handles and sleek handleless cabinets. Think storage and organizing when it comes to functionality. All of your belongings should fit neatly into your cabinets in a manner that is both clutter-free and appealing to you.

If you approach it correctly, selecting the perfect kitchen cabinets may be a snap. Consider the design of your kitchen, the cabinet material, the desired cabinet style, as well as the aesthetics and usefulness. Consult our experts right away if you’re uncertain how to continue! You can also check CWP cabinetry reviews for your peace of mind.

.fusion-fullwidth.fusion-builder-row-2 { overflow:visible; }

The post The Detailed CWP Cabinetry Guide appeared first on Luxury Home Remodeling | Sebring Design Build.

Did you miss our previous article…
https://www.amazingsidingstl.com/?p=459