You Need To Know These Tankless Hot Water Heater Pros And Cons

tankless-water-heater-pros-and-cons-sebring-design-build

Featured Image: Fresh Water Systems

Tankless water heaters are becoming popular across the globe thanks to their advantages. No system is perfect though, and when it comes time for you to upgrade to a new water heater, you need to weigh up the pros and cons.

We’ve spoken to some hot water experts and collected the pros and cons of tankless water heaters that you need to know before you commit.

Pro: Only Pay for the Hot Water You Use

One of the biggest tankless water heater advantages is that their running costs are cheaper. This is because you only pay for the water you heat.

Traditional water heaters heat up a whole tank of water and keep it warm, regardless of how much hot water you actually use. This is why it’s so important to get the right-sized tank so you’re not heating more water than you need.

Tankless water heaters, however, only heat water when you turn the hot water tap on. You could save between 8 and 34 per cent of your water heating energy with a tankless water heater depending on your hot water usage.

With water heating accounting for 18% of your home’s energy use, your energy bill could be 6.12% cheaper with an instant hot water system.

Con: More Costly Upfront

Compared to traditional storage tank hot water systems, tankless units are more costly to purchase upfront. A tankless water heater tends to be almost twice as expensive to purchase as conventional water heaters. That’s not including installation!

tankless-water-heater-pros-and-cons-sebring-design-build

Choate’s HVAC

Pro: Never Run Out Of Hot Water Again

Are you tired of having to wait for your storage tank to reheat the whole tank after everyone in the house has had a shower except you? You won’t have that problem with a tankless water heater.

Tankless water heaters heat water as it is passed through the unit. So long as the hot water tap is turned on, water will continue to be heated by your tankless water heater. It’s essentially an endless supply of hot water!

Con: Tankless Water Heaters Are Limited By Their Flow Rate

While you don’t have a finite amount of hot water with tankless systems as you do with storage types, you are limited by a maximum flow rate. This can range from four to eight gallons per minute (GPM).

If you use your shower, washing machine and dishwasher all at once, you might exceed your unit’s flow rate. Instead of your shower suddenly running cold, the hot water will be spread out between all the appliances and fixtures. This results in only lukewarm water, with an inconsistent temperature.

The solution to this problem is to spread out your hot water use, rather than using all your hot water appliances at once. Alternatively, you could have more than one water heater if water demand is so high.

Pro: More Energy-Efficient And Environmentally Friendly

Because you’re only heating the water that you use, a tankless water heater is more energy-efficient than a traditional water heater. It takes a lot of energy to keep a tank full of water hot!

Alongside energy efficiency, you’ll usually find increased environmental friendliness. Water heating is the largest contributor to residential greenhouse gas emissions. An electric storage tank hot water system releases 16 to 27 per cent more greenhouse gases than a tankless type in a three-person house. Gas instant hot water systems are even better.

Upgrading to a tankless system will not only help save you money, but you’ll be doing the environment a favour too.

Con: Hot Water Isn’t Instant

Despite the name, instant hot water system, you don’t actually get hot water instantly. Because you don’t have any stored hot water, it takes some time for your water heater to heat your water from cold to the set temperature.

The cold water you feel is what was left in the pipes from the last time you turned the hot water on. It doesn’t take long for your water to become hot, thankfully. This does mean you’ll waste a small amount of water waiting for it to heat up, however.

Off Grid Permaculture

Pro: Less Risk Of Leaks And No Chances Of Explosions

Storing hot water isn’t as simple as just keeping it in a sealed tank. A storage tank can leak water as it corrodes and a faulty pressure relief valve puts you at risk of it exploding.

These risks are eliminated from tankless water heaters, as they don’t have the challenge of storing water.

Con: Inconsistent Temperatures

You’ll often experience inconsistent temperatures if your tankless water heater’s flow rate is too small. For reference, here are some common flow rates of plumbing fixtures and appliances:

faucets – 0.5-1.5 GPMbathtub faucet – 4-7 GPMshower head – 1.5-2.5 GPMdishwasher – 1-1.5 GPMwashing machine – 1.5-3 GPM

Given that you’ll find tankless systems with flow rates between four and eight GPM, you need to consider how much hot water your home uses at once.

Pro: Saves Space

One of the pros of tankless water heaters is their compact size. Unlike traditional water heaters which have a bulky storage tank, tankless water heaters are only a small, wall-mounted unit. This makes them a great option for homes with only a small amount of land or apartments.

Not only that, but you no longer need to look at an ugly storage tank!

Con: Tankless Water Heater Installation Is More Specialised

All the benefits of tankless water heaters are thanks to their advanced design and features. This all comes with a more specialised installation, however.

If you’re installing a tankless water heater where a storage tank once was for the first time, you’ll likely need new wiring, piping or gas lines. Some manufacturers also require that a water softener is installed to prevent mineral buildup in the system. Your warranty could be voided if this isn’t installed.

Storage tank systems have been around for much longer too, so more plumbers are familiar with these systems too. This means it’s even more important to ensure the plumber who is installing your tankless water heater is fully licensed and has plenty of industry experience.

tankless-water-heater-pros-and-cons-sebring-design-build

KTAR News

Pro: Longer Lifespan

While there are measures in place to prolong the lifespan of a storage tank, storing water in a metal tank only works for so long. Eventually, the tank will corrode and you won’t be able to use it to heat water anymore. More often than not, this is the reason why your hot water system needs to be replaced.

The benefit of not having to store water in the first place means this isn’t a problem for tankless water heaters. A tankless water heater will have a longer lifespan than a storage hot water heater.

Con: Requires More Maintenance

All kinds of water heaters require regular servicing to work efficiently and prevent costly hot water system repairs. Because of how tankless hot water heaters work, they tend to require more maintenance than a traditional water heater.

The system should be flushed annually to remove any mineral buildups which can cause blockages and stop internal parts from working. The filters, fans and other components also need to be checked to ensure they are working as they should.

This is no DIY job and so one of the cons of tankless water heaters is that you’ll need to hire a licensed plumber for this. If you don’t follow the service requirements as specified by the manufacturer, your warranty might be voided too.

Pro: Longer Warranties

Remember how we said tankless water heaters tend to last longer? This often means manufacturers provide longer warranties on these systems too.

Provided you follow the manufacturer’s instructions, some warranties last up to 20 years! So if anything goes wrong, you won’t be the one to foot the bill.

Con: No Power, No Hot Water

A major con of tankless water heaters is that if the power goes out, you’ve got no hot water. Even gas-powered tankless water heaters require electricity to operate a control panel.

This is one area where conventional water heaters have a major advantage over tankless systems. In the event of a power outage, a gas water heater will continue to heat water and an electric system will at least store whatever hot water is left in the tank.

tankless-water-heater-pros-and-cons-sebring-design-build

Out Of This World Plumbing

Pro: Clean Hot Water

A big challenge for storage water heaters is the cleanliness and safety of the stored water. If the tank corrodes, your water will end up rusty and have a brown-red colour. This is due to the iron content in the water.

Thankfully, rusty water isn’t harmful to you but isn’t pleasant to look at. It’s best not to consume this water though, in case the cause is not a corroding water heater but something else.

The major concern with stored water is the risk of bacterial growth. Storage tanks should be set to 140°F (60°C) to stop this. Else, you run the risk of bacteria such as Legionella pneumophila growing in the tank. This can cause Legionnaires’ Disease and other health problems.

Because a tankless water heater doesn’t store any water, this risk of rust or bacteria is eliminated. You can rest knowing your hot water is clean from a tankless water heater.

Con: Difficult to Get Lukewarm Water

For a tankless hot water heater to turn on, a set minimum volume of water needs to flow from a faucet. This means there’s a bit of a jump between cold and the coolest warm water where the system turns on. Those of us with extremely low-flow faucets and shower heads can struggle to trigger the water heater to turn on too.

So if you’re someone who enjoys a barely warm shower, you might find it difficult to get this with a tankless water heater. For the vast majority of us who enjoy a searing hot shower, this isn’t a problem.

Pro: Gas, Electric and Solar Models Available

Instant water heaters can be powered by gas, electricity and even solar, so no matter where you are in the world, there’s an option for you. Gas models tend to be the most efficient of the three power sources, but not everyone has access to natural gas.

Solar models harness the power of the sun to heat your water, so you can recoup the additional installation costs more quickly too. When the sun’s not out and there’s not enough energy to heat your water, these systems can have gas or electric boosters to take over the heating power. This means you’re never left without hot water.

Noreus

The Verdict – Are Tankless Water Heaters Worth It?

Tankless water heaters have a range of benefits that make them attractive options for the modern homeowner. They aren’t without their faults, though, and it’s up to you to weigh up all the pros and cons to make the right decision.

Installing a tankless water heater means you get great energy savings, unlimited clean hot water, a longer-lasting unit and so much more. This is at the price of a higher upfront cost, more specialised installation and no hot water during power outages, to name a few cons.

Most homes will get more benefits from a tankless water heater than disadvantages. There are limited circumstances where you might experience more cons than pros with this system, including:

large homes with big hot water demandspeople who like cool/lukewarm showersextremely low flow fixtures are installed that stop the system from turning onupfront installation costs are too much

If you don’t fall into any of these categories, then your home can experience some major benefits by upgrading to a tankless water heater.

The post You Need To Know These Tankless Hot Water Heater Pros And Cons appeared first on Luxury Home Remodeling | Sebring Design Build.

Did you miss our previous article…
https://www.amazingsidingstl.com/?p=625

4 Best 9 Inch Cordless Cut Off Saws [2021 Reviews]

best-concrete-cordless-cut-off-saw-reviews-sebring-design-build

Featured Image: Pro Tool Reviews

Are you looking for a cut off saw? 

A cut-off saw, sometimes known as an abrasive, is a circular saw used to cut metal and masonry. An abrasive disc, comparable to a thin grinding wheel, performs the cutting action. This isn’t technically a saw because it doesn’t cut with consistently formed edges (teeth). 

You are in luck because today, we are going to review the best 9-inch cordless cut off saws in the market.

.fusion-fullwidth.fusion-builder-row-1 { overflow:visible; }1.>

DEWALT FLEXVOLT 60V MAX Cut-Off Saw Kit, 9-Inch (DCS690X2)
DEWALT FLEXVOLT 60V MAX Cut-Off Saw Kit, 9-Inch (DCS690X2) Heavy load indicator light provides power and runtime feedback during demanding applications5-position rotatable guard for approach angle selection, allowing for optimal visibility and accessibility when cutting in tight spacesDual-sided water feed system offers an OSHA Table 1 Compliant solution for dust management when cutting concreteLatched and sealed battery box for added protection in harsh jobsite conditionsHigh-performance brushless motor delivers FLEXVOLT® cordless power for long runtime in demanding applications without the hassles of gasCheck Price Below

Buy on Amazon>

2.>

Milwaukee 2786-20 M18 FUEL Lithium-Ion 9 in. Cut-Off Saw w/ONE-KEY (Tool Only)
Milwaukee 2786-20 M18 FUEL Lithium-Ion 9 in. Cut-Off Saw w/ONE-KEY (Tool Only) Up To 50% Lighter Than Gas with Power To Cut Reinforced ConcreteBlade Diameter: 9″ = Cut Depth: 3.4″RPM: 6,600, Blade Arbor: 7/8″Onboard Water Connection: Quick ConnectRAPIDSTOP Blade BrakeCheck Price Below

Buy on Amazon>

3.>

Evolution R230DCT - 9 in Concrete Saw (Aka Circular Saw, Angle Grinder, Chop Saw, Cut Off Saw, Demo Saw, Disc Cutter, Power Cutter) - 15A Motor, No Gas - 3-1/2 In Cut - Incl Diamond Masonry Blade
Evolution R230DCT – 9 in Concrete Saw (Aka Circular Saw, Angle Grinder, Chop Saw, Cut Off Saw, Demo Saw, Disc Cutter, Power Cutter) – 15A Motor, No Gas – 3-1/2 In Cut – Incl Diamond Masonry Blade Safer & more practical cutting vs a grinderErgonomic design to improve user posturePowerful 15A motor and 9″ diamond blade includedWheeled skid plate for added protection and assisted cutting3m heavy-duty rubber cableCheck Price Below

Buy on Amazon>

4.>

Evolution Power Tools EVOSAW230 9-Inch Steel Cutting Circular Saw, Blue
Evolution Power Tools EVOSAW230 9-Inch Steel Cutting Circular Saw, Blue Cuts mild steel clean without heat, burrs or coolant1750 watt/ 15 amp motor; extremely portable2700 RPM No loadBevel tilt from 0-451-Inch blade arborCheck Price Below

Buy on Amazon>

1. DEWALT FLEXVOLT® 60V 9 Inch Cut-Off Saw DCS690B

.fusion-content-boxes-1 .heading .content-box-heading {color:#cfcfcf;}
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-link-icon-hover .heading .content-box-heading,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-link-icon-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box-hover .heading .content-box-heading,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-1 .fusion-content-box-hover .fusion-read-more:hover:after,
.fusion-content-boxes-1 .fusion-content-box-hover .fusion-read-more:hover:before,
.fusion-content-boxes-1 .fusion-content-box-hover .fusion-read-more:hover,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-link-icon-hover .icon .circle-no,
.fusion-content-boxes-1 .heading .heading-link:hover .content-box-heading {
color: #65bc7b;
}
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box-hover .icon .circle-no {
color: #65bc7b !important;
}.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button {background: #293f63;color: #ffffff;}.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button .fusion-button-text {color: #ffffff;}
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon > span {
background-color: #65bc7b !important;
}
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box-hover .heading .icon > span {
border-color: #65bc7b !important;>

Pros:

Brushless motor with high outputRotatable guard with five positionsFor dust control, a dual-sided water feed system is usedSealed and latched battery boxIndicator light for heavy loads

Cons:

Limited battery life Proprietary blades

Sebring Tip:

Dewalt continues to improve cordless power and convenience. Cutting rebar is a breeze with the FLEXVOLT 60 V Brushless 9-Inch Cut-Off Saw Kit. We believe it is also beneficial to masonry contractors. This battery powered saw is ideal for light-duty work and as a masonry tool. The dual-sided water system ensures OSHA compliance, which is a significant benefit.

Overall, the FLEXVOLT 60 V Brushless 9-inch Cut-Off Saw Kit surprised us greatly. Well done, Dewalt!

.fusion-content-boxes-1 .fusion-content-box-hover .heading-link:hover .icon i.circle-yes,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box:hover .heading-link .icon i.circle-yes,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon i.circle-yes,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box-hover .heading .icon i.circle-yes {
background-color: #65bc7b !important;
border-color: #65bc7b !important;>

2. Milwaukee M18 FUEL™ 9” Cut-Off Saw MODEL 2786-20

.fusion-content-boxes-2 .heading .content-box-heading {color:#cfcfcf;}
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-link-icon-hover .heading .content-box-heading,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-link-icon-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box-hover .heading .content-box-heading,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-2 .fusion-content-box-hover .fusion-read-more:hover:after,
.fusion-content-boxes-2 .fusion-content-box-hover .fusion-read-more:hover:before,
.fusion-content-boxes-2 .fusion-content-box-hover .fusion-read-more:hover,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-link-icon-hover .icon .circle-no,
.fusion-content-boxes-2 .heading .heading-link:hover .content-box-heading {
color: #65bc7b;
}
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box-hover .icon .circle-no {
color: #65bc7b !important;
}.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button {background: #293f63;color: #ffffff;}.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button .fusion-button-text {color: #ffffff;}
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon > span {
background-color: #65bc7b !important;
}
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box-hover .heading .icon > span {
border-color: #65bc7b !important;>

Pros:

RAPIDSTOP Blade Brake High-capacity motorLightweight

Cons:

Not for heavy-duty use

Sebring Tip:

The Milwaukee 9-Inch Cut Off Saw is a new tool in the Milwaukee portfolio, and the designers paid attention to the market and designed a competitive cut-off saw. The friction glide adjustable guard, which the user can modify to any position without using any pre-set detents, was one of our favorites. This feature gives the saw a lot of leeway in terms of how it fits with workpieces and the user’s stance.

The Milwaukee concrete saw is the only one with the One-Key mechanism. This feature allows users to trace the position of their tool, lockout/disable the saw from unauthorized users and manage tool inventory through the One-Key app.

.fusion-content-boxes-2 .fusion-content-box-hover .heading-link:hover .icon i.circle-yes,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box:hover .heading-link .icon i.circle-yes,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon i.circle-yes,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box-hover .heading .icon i.circle-yes {
background-color: #65bc7b !important;
border-color: #65bc7b !important;>

3. Evolution R230DCT – 9-Inch Concrete Saw

.fusion-content-boxes-3 .heading .content-box-heading {color:#cfcfcf;}
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-link-icon-hover .heading .content-box-heading,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-link-icon-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box-hover .heading .content-box-heading,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-3 .fusion-content-box-hover .fusion-read-more:hover:after,
.fusion-content-boxes-3 .fusion-content-box-hover .fusion-read-more:hover:before,
.fusion-content-boxes-3 .fusion-content-box-hover .fusion-read-more:hover,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-link-icon-hover .icon .circle-no,
.fusion-content-boxes-3 .heading .heading-link:hover .content-box-heading {
color: #65bc7b;
}
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box-hover .icon .circle-no {
color: #65bc7b !important;
}.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button {background: #293f63;color: #ffffff;}.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button .fusion-button-text {color: #ffffff;}
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon > span {
background-color: #65bc7b !important;
}
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box-hover .heading .icon > span {
border-color: #65bc7b !important;>

Pros:

Cutting is safer than using a grinderDesign with ergonomics in mindA 9-inch diamond blade is includedFor increased safety, a wheeled skid plate is included

Cons:

There are no notable drawbacks

Sebring Tip:

Cutting masonry, metal, and other materials with a mains-powered disc cutter is perfect. Unlike a grinder, this tool was created with the sole purpose of cutting. Benefits include a huge cut capacity for the blade size, as well as an ergonomic design that improves user posture while increasing safety and accuracy. The higher angle on the strengthened skid plate lifts the blade off the floor, allowing the machine to be placed down straight after the cut. Built-in wheels improve precision and reduce user fatigue when performing lengthy, straight cuts at ground level. All varieties of masonry, including reinforced concrete, are easily handled by the powerful electric motor. The balanced center of gravity is provided by the central location.

.fusion-content-boxes-3 .fusion-content-box-hover .heading-link:hover .icon i.circle-yes,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box:hover .heading-link .icon i.circle-yes,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon i.circle-yes,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box-hover .heading .icon i.circle-yes {
background-color: #65bc7b !important;
border-color: #65bc7b !important;>

4. Evolution Power Tools EVOSAW230 9-Inch Steel Cutting Circular Saw

.fusion-content-boxes-4 .heading .content-box-heading {color:#cfcfcf;}
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-link-icon-hover .heading .content-box-heading,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-link-icon-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box-hover .heading .content-box-heading,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-4 .fusion-content-box-hover .fusion-read-more:hover:after,
.fusion-content-boxes-4 .fusion-content-box-hover .fusion-read-more:hover:before,
.fusion-content-boxes-4 .fusion-content-box-hover .fusion-read-more:hover,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-link-icon-hover .icon .circle-no,
.fusion-content-boxes-4 .heading .heading-link:hover .content-box-heading {
color: #65bc7b;
}
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box-hover .icon .circle-no {
color: #65bc7b !important;
}.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button {background: #293f63;color: #ffffff;}.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button .fusion-button-text {color: #ffffff;}
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon > span {
background-color: #65bc7b !important;
}
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box-hover .heading .icon > span {
border-color: #65bc7b !important;>

Pros:

Cuts 1/4″ steel using a high-grade metal cutting sawCuts without using heat, without causing burrs, and without the usage of a coolantStainless steel, aluminum, and wood can all be cut using this toolIt comes with a sturdy carrying case and a 3-year warrantyBevel tilt ranges from 0 to 45 degrees, and blade cutting depth is adjustable

Cons:

Specialty blades are not included

Sebring Tip:

Evolution Power Tools markets the EVOSAW230 as a professional-grade big steel-cutting circular saw that can cut through soft metals without the use of heat burrs or coolant. This ground-breaking saw established a new standard in industrial metal cutting, especially considering the price tag of this 15-amp heavy-duty metal cut off saw.

When it comes to mild steel cutting, the EVOSAW230 will quadruple your productivity and create perfect-looking cuts that don’t require any further grinding or metalwork.

.fusion-content-boxes-4 .fusion-content-box-hover .heading-link:hover .icon i.circle-yes,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box:hover .heading-link .icon i.circle-yes,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon i.circle-yes,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box-hover .heading .icon i.circle-yes {
background-color: #65bc7b !important;
border-color: #65bc7b !important;>

Why Invest On 9 Inch Cordless Cut-Off Saws

Stihl was the first business to release 9-inch cordless Stihl chop saws in 2015. The second was Husqvarna. Both of these saws ran on 36 volts and had a reputation for long run times, although they lacked power.

DEWALT then released the 60V FlexVolt in 2018, which we tested last winter and have been using on our job sites. Milwaukee was the last to market in the fall of 2019.

Why would you need a 9-inch cut-off saw, you might wonder?

It’s a reasonable question. These saws are more of an expansion tool for people who are already on the platform than entry-level instruments. We call them “80 percent tools” since they can perform 80% of the duties that a gas tool can.

Cordless cut-off saws have a wide range of uses and “niche wins.” Mechanical contractors use it for fast, ultra-straight cuts in 8” PVC tubing, masonry and foundation contractors use it for basement drainage, and “first-pass” door entrance cuts are just a few examples.  Once space is occupied, don’t forget about call back cuts or punch list applications.

Here are the advantages of 9 inch cordless cut-off saw:

Fast Ramp Up Noise and vibration are reducedOverhead is easier to useLighter

Different Types Of Cut Off Saw

A cut off saw is a simple yet effective cutting instrument that is commonly used in metal cutting. A cutoff saw is a word that relates to two different types of power tools. First, there’s the miter saw, which is commonly employed in the woodworking industry. The abrasive saw, on the other hand, is used to cut hard materials like metals and ceramics. Miter saws are used to make precise angled and bevel cuts. Let’s have a look at the many varieties of cut-off saws.

Manual Miter Saw

A manual miter saw is a metal guide that works in conjunction with a miter box to make precise miter cuts. These cut off saws are still infrequently used in picture framing and manual woodworking, but power woodworking tools have mostly superseded them.

These cut off saws are still infrequently used in picture framing and manual woodworking, but power woodworking tools have mostly superseded them. 

Power Miter Saw

A power miter saw is a gadget that allows you to make quick, precise cuts at the specified angle. It is extensively utilized in framing and mold cutting activities. The majority of miter saws are light and portable, with blade widths ranging from eight to twelve inches.

brasive Saw

An abrasive saw is a power tool that is used to cut hard materials. The cutting motion is performed by an abrasive disc that looks like a thin grinding wheel. For cutting, the abrasive saw does not employ standard-shaped edges. The cutting wheel & motor are mounted on a free arm fixed to a permanent base plate, and it features an integrated vise or clamp.

Since its introduction, the electric cut off tool has aided in the seamless operation of construction sites. Because of their portability, these instruments are also ideal for lightweight steel construction and workshops that use constant power cold saws.

The safety of the workers is critical while utilizing a power tool such as a battery operated saw. So, here are some safety precautions that you may use to keep yourself safe while using a cut off saw.

Cut Off Saw Safety Tips

Although a set of safety goggles may appear to be sufficient, a face cover is strongly recommended to protect yourself from potentially fatal injuries.

If the dust collection system isn’t working properly, you’ll need to cover your nose with a mask.

Before mounting the cut-off wheel, inspect it for any cracks or damage.

Applying sideways force to the parting-off wheel is never a good idea. Because the parting-off wheels have very narrow cross-sections, this can result in wheel fracture.

During the cutting operation, there are visible sparks. To avoid a fire hazard, keep flammable objects away from chop saws.

Cutting wood, plywood, plastic, and other materials with a cut off the wheel can cause the wheel to load up, resulting in wheel breaking.

These are the several varieties of cut off saws from which you can choose the one that best suits your needs. When using this tool, you should also be concerned about safety, so follow the safety precautions listed above and stay safe when using these power tools.

Pros And Cons Of Using Cut Off Saw

Pros: A cut off saw is a powerful tool that will devour almost anything you put in front of it. A metal cutting cut off saw is by far the greatest option for reliably cutting big chunks of metal.

Another significant advantage is the speed with which metals and other materials may be sliced. Cut off saws prioritize speed and power over precision. Thus, many feature footswitches that allow you to feed metal quickly with both hands.

Furthermore, because the abrasive wheels on cut-off saws are thinner than those on circular saw blades, there is less waste.

Cons: To begin with, cut off saws are more difficult to control, which is primarily an issue when making complicated, angled cuts. However, I believe it is still worth addressing. Furthermore, the cut off saw is unsuitable for producing precise cuts. Finally, keep in mind that using a cut off saw is a little more difficult than using other types of saws.

Cut Off Saw FAQs

What is the purpose of a cut-off saw?

Abrasive saws, also known as cut-off saws or chop saws, are circular saws (a type of power tool) used to cut hard materials, including metals, tile, and concrete. An abrasive disc, comparable to a thin grinding wheel, performs the cutting action. This isn’t technically a saw because it doesn’t cut with consistently formed edges (teeth).

These cut off saws come in different forms, including tabletop, freehand, and walk behind. The cutting wheel and motor are installed on a pivoting arm coupled to a fixed base plate in tabletop variants, which are widely used to cut tile and metal. Tabletop saws are frequently powered by electricity and feature a built-in vise or other clamping mechanisms. On construction sites, freehand designs are commonly used to cut concrete, asphalt, and tubing. The handles and motor are close to the operator, and the blade is at the far end of the saw. Because the materials being cut are heavier & larger, freehand saws do not have a vise. Walk-behind models, sometimes known as flat saws, are larger saws that cut into concrete floors, asphalt, and concrete paving materials from a stand or cart.

What is the distinction between a chop saw and a cut-off saw?

The blade and angle of their blades are the key differences between the two. Miter saw blades can be oriented in a variety of ways, whereas chop saw blades are always inclined at 90 degrees because it is the only cut they can make.

Is it possible to cut wood using a cut-off saw?

A protractor fence and a straight fence are common on chop saws. Although abrasive cut-off saws are typically used to cut metal or PVC, with a few simple tweaks, they may be designed to cut wood as well.

Conclusion:

Our clear winner is none other than Dewalt. The Dewalt FLEXVOLT 60V Cordless 9″ Cut-Off Saw boasts a 3.25″ cut depth and a brushless motor w/ a no-load speed of 6,500 RPM. This allows for no messing around with gas, instant-on, and rapid cutting and scoring of concrete and masonry materials. It cuts through steel and rebar with the same efficiency as gas saws. The guard is positioned out of the way to allow for a clear line of sight and good vision in congested areas. There are no belts to change, tension, or maintenance on the Dewalt DCS690 because it has a beltless all-metal drivetrain. The battery and terminals are also protected from water, dust, and other materials by the latched and sealed battery box. A duel-feed water system provides an OSHA Table 1 compliance option for dust management when cutting concrete and masonry materials. The Flexvolt 9″ cut-off saw, 2x DCB609 Flexvolt Batteries (9.0Ah), Dewalt Fast Charger, 9″ Diamond Concrete Blade, and 9″ Abrasive Blade are included in the DCS690X2 package.

To view our Amazon Associates Disclaimer, please click here.

The post 4 Best 9 Inch Cordless Cut Off Saws [2021 Reviews] appeared first on Luxury Home Remodeling | Sebring Design Build.

Mid century lighting, door knobs, cabinet pulls and knobs — on sale at Rejuvenation

Rejuvenation has a big sale on, and I scoured some key categories (like, 842 lights, gulp) to find midcentury products that might appeal to readers. Note: This is NOT a sponsored post or anything like that — I was just researching to see what’s new out there and spotted the sale. Note, some of the…

The post Mid century lighting, door knobs, cabinet pulls and knobs — on sale at Rejuvenation appeared first on Retro Renovation.

Did you miss our previous article…
https://www.amazingsidingstl.com/?p=617

5 Ways to Update a Dated 3-room HDB Resale Flat

Got your hands on a 3-room HDB resale flat on the older side? Chances are, it’s dim, dingy and dated and in real need of a revamp. Here are a few ways to update the look, whether you’re contemplating a bright and airy Scandinavian design or a characterful industrial style.

1. White + Wood

Design: Key Concept

Renovation cost: $40K

Location: Aljunied Crescent

You can’t go wrong with a classic white and wood combination. It works to brighten up a dark home, without feeling too stark or sterile thanks to the wood tones.

If you don’t like having your bedroom door facing into the living room, conceal it within the design of your feature wall. This can help to create more visual continuity in your space, making a small area seem bigger. Bonus for privacy: Your guests won’t be stumbling into your bedroom “by accident”.

2. Open plan for entertaining

Design: Rezt & Relax Interior

Designed for entertaining, this modern industrial home packs a punch in clever design features including a 2-metre long dining table, an unconventional kitchen, and a bedroom that opens up into the rest of the communal spaces.

Set on a raised platform that hides plenty of extra storage space, the bedroom is located behind bi-fold glass doors that open up into the living room to create a large entertaining hub for when guests come over.

3. A blend of the old and the new

Design: subtlesato studio

Location: Bedok

Interesting textures abound in this 3-room HDB resale flat for a bachelor. Old-school ventilation bricks, Peranakan flower tiles and terrazzo flooring are juxtaposed alongside sleek lines, dark hues and modern furnishings to create a blend of the nostalgic with the newfangled.

One of the main structural changes to this flat was to combine the two bedrooms into one entity, but with an internal window between the two spaces to divide them into a sleeping area and walk-in closet space.

4. Detailed transformation

Design: The Local Inn.terior

Location: Commonwealth

The ‘before’ and ‘after’ images of this 3-room HDB resale illustrate just how much transformation this apartment went through. For a start, the foyer area was opened up into the living room with a multipurpose shoe bench that can be used on both zones.

Another big change was in the kitchen, where the space was expanded for more spaciousness and then set on a raised platform. One of the bedrooms was also extended so that it now has its own private balcony.

Foyer + Living room

Kitchen

Bedroom

‘Before’ images courtesy of designer Vincent Tan

5. Bohemian rhapsody

Design: Fuse Concept

Renovation cost: $55K

Location: Eunos Crescent

Home to a creative couple, this bohemian style 3-room flat feels just like a flea market, with a hodgepodge of textures, colours and detailing. In order for the furnishings and design elements to stand out, the foundation was kept simple with white walls and cement-like homogeneous floor tiles.

A precursor to the bold hues in the kitchen is the flashy pink neon sign just outside the entrance. Inside the cooking space, an orange Smeg fridge pops against dark green walls with dangling light bulbs lending extra interest. See-through sliding doors close off the private areas, with sheer curtains for privacy and an airy feel.

 

if(!gform){document.addEventListener(“gform_main_scripts_loaded”,function(){gform.scriptsLoaded=!0}),window.addEventListener(“DOMContentLoaded”,function(){gform.domLoaded=!0});var gform={domLoaded:!1,scriptsLoaded:!1,initializeOnLoaded:function(o){gform.domLoaded&&gform.scriptsLoaded?o():!gform.domLoaded&&gform.scriptsLoaded?window.addEventListener(“DOMContentLoaded”,o):document.addEventListener(“gform_main_scripts_loaded”,o)},hooks:{action:{},filter:{}},addAction:function(o,n,r,t){gform.addHook(“action”,o,n,r,t)},addFilter:function(o,n,r,t){gform.addHook(“filter”,o,n,r,t)},doAction:function(o){gform.doHook(“action”,o,arguments)},applyFilters:function(o){return gform.doHook(“filter”,o,arguments)},removeAction:function(o,n){gform.removeHook(“action”,o,n)},removeFilter:function(o,n,r){gform.removeHook(“filter”,o,n,r)},addHook:function(o,n,r,t,i){null==gform.hooks[o][n]&&(gform.hooks[o][n]=[]);var e=gform.hooks[o][n];null==i&&(i=n+”_”+e.length),null==t&&(t=10),gform.hooks[o][n].push({tag:i,callable:r,priority:t})},doHook:function(o,n,r){if(r=Array.prototype.slice.call(r,1),null!=gform.hooks[o][n]){var t,i=gform.hooks[o][n];i.sort(function(o,n){return o.priority-n.priority});for(var e=0;eComplete this form and we will recommend you a list of reputable interior design firms that fit your renovation requirements. It’s free! Note: This form is not applicable for repair works request.How many interior designers do you wish to get in touch with?3 – 55 – 8

My Property

My Property Type isHDBApartment/CondominiumPrivate HouseCommercialThe room type isPlease selectStudio2 Rooms3 Rooms4 Rooms5 RoomsAbove 5 RoomsProperty StatusNewResalePresently StayingKey Collection TimeYes, Key is collectedNo, in 1 – 3 months timeNo, in 3 – 6 months timeNo, in 7 – 12 months timeHave not purchase the unitProperty AddressUpload your Floor PlanAccepted file types: jpg, gif, png, pdf, ppt, jpeg, Max. file size: 2 MB.We recommend to attach your floor plan for a better estimate. File must less than 2MB.

Project Info

Area(s) you need to renovateLiving RoomDining RoomKitchenBedroomsBathroomsOthersWhole unitPreferred design styleNo PreferenceAsianClassicContemporaryEclecticIndustrialMediterraneanMidcenturyMinimalismModernRetroRusticScandinavianTraditionalTransitionalTropicalVictorianVintageMy project priority isPlease selectAesthetically Nice – I want good designCost effectiveness – I’m on a tight budgetMy renovation budget isPlease selectNot Fixed20,000 and Below20,001 – 30,00030,001 – 40,00040,001 – 60,00060,001 – 80,00080,001 – 100,000100,001 – 200,000200,001 & AboveDo you require renovation loan?Please selectYes, please call meNo. I don’tOther information?

My Contact Details

My name isFirstLastMy Email isYou can call me atHow Did You Get To Know Us?Please selectGoogleFacebookInstagramYahooEvents/RoadshowFriendsNewsletterRenoNation MagazineThe Straits TimesSME MagazineBingMSN Search

 

AgreementI acknowledge that the details provided in this form will be shared with Renonation.sg and the recommended interior design firms.AgreementI wish to receive home renovation inspiration, tips and guides from Renonation.sgNameThis field is for validation purposes and should be left unchanged.
gform.initializeOnLoaded( function() {gformInitSpinner( 5, ‘https://www.renonation.sg/wp-content/plugins/gravityforms/images/spinner.svg’ );jQuery(‘#gform_ajax_frame_5’).on(‘load’,function(){var contents = jQuery(this).contents().find(‘*’).html();var is_postback = contents.indexOf(‘GF_AJAX_POSTBACK’) >= 0;if(!is_postback){return;}var form_content = jQuery(this).contents().find(‘#gform_wrapper_5’);var is_confirmation = jQuery(this).contents().find(‘#gform_confirmation_wrapper_5’).length > 0;var is_redirect = contents.indexOf(‘gformRedirect(){‘) >= 0;var is_form = form_content.length > 0 && ! is_redirect && ! is_confirmation;var mt = parseInt(jQuery(‘html’).css(‘margin-top’), 10) + parseInt(jQuery(‘body’).css(‘margin-top’), 10) + 100;if(is_form){jQuery(‘#gform_wrapper_5’).html(form_content.html());if(form_content.hasClass(‘gform_validation_error’)){jQuery(‘#gform_wrapper_5’).addClass(‘gform_validation_error’);} else {jQuery(‘#gform_wrapper_5’).removeClass(‘gform_validation_error’);}setTimeout( function() { /* delay the scroll by 50 milliseconds to fix a bug in chrome */ jQuery(document).scrollTop(jQuery(‘#gform_wrapper_5’).offset().top – mt); }, 50 );if(window[‘gformInitDatepicker’]) {gformInitDatepicker();}if(window[‘gformInitPriceFields’]) {gformInitPriceFields();}var current_page = jQuery(‘#gform_source_page_number_5’).val();gformInitSpinner( 5, ‘https://www.renonation.sg/wp-content/plugins/gravityforms/images/spinner.svg’ );jQuery(document).trigger(‘gform_page_loaded’, [5, current_page]);window[‘gf_submitting_5’] = false;}else if(!is_redirect){var confirmation_content = jQuery(this).contents().find(‘.GF_AJAX_POSTBACK’).html();if(!confirmation_content){confirmation_content = contents;}setTimeout(function(){jQuery(‘#gform_wrapper_5’).replaceWith(confirmation_content);jQuery(document).scrollTop(jQuery(‘#gf_5’).offset().top – mt);jQuery(document).trigger(‘gform_confirmation_loaded’, [5]);window[‘gf_submitting_5’] = false;wp.a11y.speak(jQuery(‘#gform_confirmation_message_5’).text());}, 50);}else{jQuery(‘#gform_5’).append(contents);if(window[‘gformRedirect’]) {gformRedirect();}}jQuery(document).trigger(‘gform_post_render’, [5, current_page]);} );} );>

Did you miss our previous article…
https://www.amazingsidingstl.com/?p=570

7 Best Fish Tapes [2021 Reviews]

best-electric-wire-fish-tapes-reviews-sebring-design-build

Featured Image: Electrical School

Are you looking for a new fish tape?

In the electrical profession, fish tapes are a must-have item. They make it possible to pull wire through walls, ceilings, and floors without cutting holes or creating their own path.

The best fish tapes should be lightweight, with a smooth draw and a sturdy, impact-resistant case. 

On the other hand, a shoddy fish tape is constructed of flimsy plastic and is hard to pull in and out.

So, to assist you in distinguishing between the good and the bad, we’ve put up a roundup of the seven best fish tapes in 2021. 

You can buy with confidence, knowing you’re getting one of the best fish tapes available.

Let’s get into the reviews right away!

.fusion-fullwidth.fusion-builder-row-1 { overflow:visible; }1.>Sale

Southwire FISH TAPE, 1/8' STEEL 50'
Southwire FISH TAPE, 1/8″ STEEL 50′ Southwire’s 1/8″-wide tempered spring steel Fish tapes provide excellent fishing performance and are the perfect addition to your other electrical toolsEASIER PULLING: High quality steel for longer life and easier pullingLONG LASTING DURABILITY: High impact case and carrying handle ensures it will be durable enough for the worksiteEFFICIENT DESIGN: The fish tape conveniently unwinds and rewinds easily for fast and efficient storageEASY UNWINDS AND REWINDS: To pay out the fish tape, pull on the actual fish tape itself (gloves are recommended). To reel it back in, rotate the case in reverse while holding the handleCheck Price Below

Buy on Amazon>

2.>Sale

Upgrade Fish Tape Wire Puller Through Wall Wire Threader Fish plus Fish Cable Fastener with Steel rope 40FT(12M)
Upgrade Fish Tape Wire Puller Through Wall Wire Threader Fish plus Fish Cable Fastener with Steel rope 40FT(12M) ⭐【Perfect Flexibility and Rigidity】Unlike fiberglass wire, it will not break if you bend too much, unlike other steel fish tape, it will not curl a lot. Our Plastic-Coated Steel Fish Tape has strong traction, good flexibility, Anti-aging and high temperature.⭐【Plastic-Coated Steel】With non-conductive plastic-coated construction, the versatile fish cable is applicable for telecom, electrical, wall, floor conduit and other wiring installation. It is the perfect tool to assist you in pulling cables through occupied duct and panel boxes.⭐【Fish Tape Fastener】Fish tape fastener is used to help fish tape more convenient to use. One side is connected with wire, the red line cap can prevent wire disconnect when pull it. Another side is connected with fish tape, which makes the wire and fish tape connect firmly.⭐【360°Available Head Wheel】The Head wheel at the end of steel wire is 360° available, much easy to across through the bends. And the unique connection method makes it durable and convenient life.⭐【Attention】The Fish Cable works great in smaller conduit, but not thicker cables or large pipe. Old style and upgrade new style will be shipped randomly.Check Price Below

Buy on Amazon>

3.>

RamPro 100 Foot Reach, Spring-Steel Fish Tape Reel, with High Impact Case, for Electric or Communication Wire Puller
RamPro 100 Foot Reach, Spring-Steel Fish Tape Reel, with High Impact Case, for Electric or Communication Wire Puller Vanitek 100 foot Flat Flexible Spring-Steel Fish Tape with high impact plastic case and durable comfortable grip easy carry handle with built-in Thumb Lock for pulling electrical or communication wires. This reel winds up and stores excess tape as wire is pulled. Handle lever Assists on rolling the cable back in. The tape is 1/8” x 1/16” x 100’ long with a pulling loop at the end.Perfect for Snaking/Thread or Pulling Cables and Wires through or Behind Ceiling, Walls/Drywall, Conduit, PVC, Pipe, Vent, Duct, Hose, Under Carpet or Insulation and more.Use for your interior and exterior Electrical Site Wiring like, Outlet, Plug, Socket, light fixture, Ceiling Fan, Dimmer, Switch, short runs installing electrical box, Electrical Panel, Subwoofer Box, Switch Box, Junction Box, CPU, Breaker Box, Receptacle box, Transformer, Doorbell, Intercom, Surveillance Camera, DCC, Security systems, Smoke detector, Thermostat, Appliances, Hot Tub, Telephone/Internet Line or Cable TV Coax.Also great for your vehicle’s Wiring like for Alarm, Remote starter, Keyless entry, OnStar, Dash/Rear view Backup camera, Radar detector, Wi-Fi, Bluetooth, Entertainment system, Stereo, Horn, Audio speakers, Radio/cassette/Cd/MP3/DVD player units, USB port, GPS navigation, Fog lights, Headlights, And more for your Home, House, Car, Truck, SUV, Boat, Camper RV, ATV, UTV, Golf Car, and so.A must for any wire and cable installationCheck Price Below

Buy on Amazon>

4.>

11' Fiberglass Running Wire Cable Coaxial Electrical Fish Tape Pull Push Kit
11′ Fiberglass Running Wire Cable Coaxial Electrical Fish Tape Pull Push Kit For running wire through walls, attics, crawl spaces, sub-floors and suspended ceilings Great for installing cableIncludes (1.1FT) 10 rods with threaded brass connectors, 3/16″ flexible acrylic connection, brass push and pull rodsRods connect for extension up to 11FT.Comes with plastic storage caseFiberglass rod diameter is 3/16″Check Price Below

Buy on Amazon>

5.>

Gardner Bender EFT-15 Mini Cable Snake, 15 Ft Steel Fish Tape, Electrical Wire Fishing Tape, Red & Black
Gardner Bender EFT-15 Mini Cable Snake, 15 Ft Steel Fish Tape, Electrical Wire Fishing Tape, Red & Black Compact, rugged design can be easily carried and stored15 foot flat steel wire tape fishes under carpets, down walls and over ceilingsLow-memory tape does not curl during extension – perfect for non-conduit situationsDurable. High-impact housing resists breakingCheck Price Below

Buy on Amazon>

6.>

FTS1/8-25 Flat Steel Fish Tape, 1/8-Inch Wide, 25-Feet
FTS1/8-25 Flat Steel Fish Tape, 1/8-Inch Wide, 25-Feet FUNCTIONALITY: Our 1/8-Inch wide tempered spring steel fish tapes provide excellent fishing performance. The rugged case is impact resistant and jobsite tough.DURABLE DESIGN: The flat fish tape is made from high quality blued steel for longer life and easier pulling.ERGONOMICS: The fish tape reel is constructed from a high impact case and convenient carrying handle.EASY TO USE: The flat steel fish tape neatly unwinds and rewinds with ease.CONVENIENT DESIGN: Laser etched in 12-Inch increments to provide instant conduit length.Check Price Below

Buy on Amazon>

7.>Sale

SWANLAKE 11' Fiberglass Running Wire Cable Coaxial Electrical Fish Tape Pull Push Glow Rods kit
SWANLAKE 11′ Fiberglass Running Wire Cable Coaxial Electrical Fish Tape Pull Push Glow Rods kit 1.11’fiberglass running wire cable electrical fish tape kit is made of fiberglass material, includes 10PCS rods (1.1ft length) with threaded brass connectors, Magnetic connector,3/16″ acrylic connection, brass push and pull rods.2.Use for running wire through walls, attics, crawl spaces, sub-floors and suspended ceilings, Great for installing cable,wires,HDMI and so on .3.This fish tape kit is flexibility(don’t over force), rigidity and great insulation, wear-resistant,corrosion-resistant and oxidation resistance,The extension rods can be connected together to achieve the required length, extending up to 11 feet.4.The bright green fish tape helps u locate and differentiate the rods from wires easily.5.The pacakge comes with a plastic storage case ,its convenient to store.Check Price Below

Buy on Amazon>

1. Southwire Fish Tape

.fusion-content-boxes-1 .heading .content-box-heading {color:#cfcfcf;}
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-link-icon-hover .heading .content-box-heading,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-link-icon-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box-hover .heading .content-box-heading,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-1 .fusion-content-box-hover .fusion-read-more:hover:after,
.fusion-content-boxes-1 .fusion-content-box-hover .fusion-read-more:hover:before,
.fusion-content-boxes-1 .fusion-content-box-hover .fusion-read-more:hover,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-link-icon-hover .icon .circle-no,
.fusion-content-boxes-1 .heading .heading-link:hover .content-box-heading {
color: #65bc7b;
}
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box-hover .icon .circle-no {
color: #65bc7b !important;
}.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button {background: #293f63;color: #ffffff;}.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button .fusion-button-text {color: #ffffff;}
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon > span {
background-color: #65bc7b !important;
}
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box-hover .heading .icon > span {
border-color: #65bc7b !important;>

Pros:

When you’re wearing large gloves, you’ll appreciate the large handleThe length of pull is easily identified thanks to laser-etched footage markingsReasonable priceSuperior grade steelIt’s simple to pull in and out

Cons:

I’d prefer a wheel with a slightly smaller diameter

Sebring Tip:

The Southwire Flat Steel Fish Tape is a 1/8-inch broad spring steel tape that allows you to pull wires from 25 feet to 240 feet. Depending on your setup, there are five possible wire-pulling choices. I use the 25-foot fishing tape since it’s perfect for the electrical connections in my house.

The tape is made of high-quality blued steel that is meant to last and pull easily. Bluing increases the steel’s corrosion resistance, making it more durable. The tape also contains laser-etched marks to indicate the length of the pull. You’ll get accurate measurements and a precise wire length this way.

.fusion-content-boxes-1 .fusion-content-box-hover .heading-link:hover .icon i.circle-yes,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box:hover .heading-link .icon i.circle-yes,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon i.circle-yes,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box-hover .heading .icon i.circle-yes {
background-color: #65bc7b !important;
border-color: #65bc7b !important;>

2. Startfine Fish Tape Wire Puller

.fusion-content-boxes-2 .heading .content-box-heading {color:#cfcfcf;}
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-link-icon-hover .heading .content-box-heading,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-link-icon-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box-hover .heading .content-box-heading,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-2 .fusion-content-box-hover .fusion-read-more:hover:after,
.fusion-content-boxes-2 .fusion-content-box-hover .fusion-read-more:hover:before,
.fusion-content-boxes-2 .fusion-content-box-hover .fusion-read-more:hover,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-link-icon-hover .icon .circle-no,
.fusion-content-boxes-2 .heading .heading-link:hover .content-box-heading {
color: #65bc7b;
}
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box-hover .icon .circle-no {
color: #65bc7b !important;
}.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button {background: #293f63;color: #ffffff;}.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button .fusion-button-text {color: #ffffff;}
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon > span {
background-color: #65bc7b !important;
}
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box-hover .heading .icon > span {
border-color: #65bc7b !important;>

Pros:

Flexible and rigid product with resistance to high temp and agingHead wheels are wide and rotatableWhen tugging, the fish tape and cables are held in place by a fastenerSafe to use insulated body

Cons:

Can’t handle thick cables and isn’t designed for huge conduits

Sebring Tip:

The Startfine Fish Tape Wire Puller is a unique technique to pull wires. In comparison to fiberglass fish tape, this brand offers the best flexibility and rigidity. When you bend it too far, it never breaks, and it doesn’t curl much. This product also has great resilience to aging and extreme temperatures.

This fish tape’s handwheel appeals to me because it is simple to operate. It spins 360 degrees, making it simple to pull cables in any direction. It also features a 3/16 x 7/16 aperture that makes it easier to handle different cables.

.fusion-content-boxes-2 .fusion-content-box-hover .heading-link:hover .icon i.circle-yes,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box:hover .heading-link .icon i.circle-yes,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon i.circle-yes,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box-hover .heading .icon i.circle-yes {
background-color: #65bc7b !important;
border-color: #65bc7b !important;>

3. RamPro Spring-Steel Fish Tape

.fusion-content-boxes-3 .heading .content-box-heading {color:#cfcfcf;}
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-link-icon-hover .heading .content-box-heading,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-link-icon-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box-hover .heading .content-box-heading,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-3 .fusion-content-box-hover .fusion-read-more:hover:after,
.fusion-content-boxes-3 .fusion-content-box-hover .fusion-read-more:hover:before,
.fusion-content-boxes-3 .fusion-content-box-hover .fusion-read-more:hover,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-link-icon-hover .icon .circle-no,
.fusion-content-boxes-3 .heading .heading-link:hover .content-box-heading {
color: #65bc7b;
}
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box-hover .icon .circle-no {
color: #65bc7b !important;
}.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button {background: #293f63;color: #ffffff;}.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button .fusion-button-text {color: #ffffff;}
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon > span {
background-color: #65bc7b !important;
}
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box-hover .heading .icon > span {
border-color: #65bc7b !important;>

Pros:

Ideal for wire installations in the home and automobilesFishing tool has a thin profile that effortlessly maneuvers through confined areasThere’s a pulling loop to keep the cable ends in placePushes through angled spots and is flexibleFor more practical use, it comes with a sturdy plastic case with a handle

Cons:

The pulling loop can easily break or be damaged

Sebring Tip:

The RamPro Spring-Steel Fish Tape is ideal for automotive and house wiring. It works with any wire and cable installation. Wires, alarms, dash cameras, entertainment systems, and other electrical connections are all pulled through. This gadget appeals to me because it can accommodate any cable I use.

This cable fishing tape is thin enough to fit in raceways, conduit pipes, and even ducts. Wire-pulling in tiny spaces is a breeze with dimensions of 1/8″ x 1/16″ x 100′. This wall fish tool also has a pulling loop at the tip, making it simple to secure the cable.

.fusion-content-boxes-3 .fusion-content-box-hover .heading-link:hover .icon i.circle-yes,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box:hover .heading-link .icon i.circle-yes,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon i.circle-yes,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box-hover .heading .icon i.circle-yes {
background-color: #65bc7b !important;
border-color: #65bc7b !important;>

4. Horusdy Fish Tape

.fusion-content-boxes-4 .heading .content-box-heading {color:#cfcfcf;}
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-link-icon-hover .heading .content-box-heading,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-link-icon-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box-hover .heading .content-box-heading,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-4 .fusion-content-box-hover .fusion-read-more:hover:after,
.fusion-content-boxes-4 .fusion-content-box-hover .fusion-read-more:hover:before,
.fusion-content-boxes-4 .fusion-content-box-hover .fusion-read-more:hover,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-link-icon-hover .icon .circle-no,
.fusion-content-boxes-4 .heading .heading-link:hover .content-box-heading {
color: #65bc7b;
}
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box-hover .icon .circle-no {
color: #65bc7b !important;
}.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button {background: #293f63;color: #ffffff;}.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button .fusion-button-text {color: #ffffff;}
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon > span {
background-color: #65bc7b !important;
}
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box-hover .heading .icon > span {
border-color: #65bc7b !important;>

Pros:

Ten thin connectable fiberglass rods Solid brass rod connectors that are non-magnetic and non-rustingPulls a variety of cable kindsA plastic cylinder is included to keep the rods organized

Cons:

It’s prone to breaking

Sebring Tip:

The Horusdy Fish Tape may be just what you need for routing wires through attics, sub-floors, and walls during cable installation. This item includes 10 1.1-foot fiberglass rods that can be connected to reach faraway cable housings. Each rod is 3/16 inch gauge, making it easy to push or pull.

The solid brass fittings on these linkable rods are incredibly sturdy. These connectors are non-magnetic and rust-resistant. So you can be confident that none of these rods will stick anywhere else if you use this tape inside electrical conduit tubes.

.fusion-content-boxes-4 .fusion-content-box-hover .heading-link:hover .icon i.circle-yes,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box:hover .heading-link .icon i.circle-yes,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon i.circle-yes,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box-hover .heading .icon i.circle-yes {
background-color: #65bc7b !important;
border-color: #65bc7b !important;>

5. Gardner Bender EFT-15 Mini Cable Snake

.fusion-content-boxes-5 .heading .content-box-heading {color:#cfcfcf;}
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-link-icon-hover .heading .content-box-heading,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-link-icon-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-box-hover .heading .content-box-heading,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-box-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-5 .fusion-content-box-hover .fusion-read-more:hover:after,
.fusion-content-boxes-5 .fusion-content-box-hover .fusion-read-more:hover:before,
.fusion-content-boxes-5 .fusion-content-box-hover .fusion-read-more:hover,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-link-icon-hover .icon .circle-no,
.fusion-content-boxes-5 .heading .heading-link:hover .content-box-heading {
color: #65bc7b;
}
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-box-hover .icon .circle-no {
color: #65bc7b !important;
}.fusion-content-boxes-5 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button {background: #293f63;color: #ffffff;}.fusion-content-boxes-5 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button .fusion-button-text {color: #ffffff;}
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon > span {
background-color: #65bc7b !important;
}
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-box-hover .heading .icon > span {
border-color: #65bc7b !important;>

Pros:

Unique fishing tape ideal for flat surfacesTextured design is compact and convenientIt includes a belt clip for easy carryingTo prevent curling during extension, the body is made of low-memory steelTool is safe to use and has a manual retraction featureIdeal for short-run connections at home

Cons:

The steel body is prone to breaking

Sebring Tip:

Use the Gardner Bender EFT-15 Mini Cable Snake to fish wires from the ceiling, under rugs, or adjacent to your walls. This device comes with a thin, flat steel tape that’s ideal for cables on flat surfaces. This gadget is perfect because it is easy to cram into small, flat areas. 

Because of its small size, this product is easy to store and transport. Because of its rough surface, it doesn’t easily slip off your hand. Also, because it’s about the same size as your palm, you can find this item handy. It’s also simple to carry, thanks to the belt clip.

.fusion-content-boxes-5 .fusion-content-box-hover .heading-link:hover .icon i.circle-yes,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-box:hover .heading-link .icon i.circle-yes,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon i.circle-yes,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-box-hover .heading .icon i.circle-yes {
background-color: #65bc7b !important;
border-color: #65bc7b !important;>

6. Southwire Flat Steel Fish Tape

.fusion-content-boxes-6 .heading .content-box-heading {color:#cfcfcf;}
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-link-icon-hover .heading .content-box-heading,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-link-icon-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-box-hover .heading .content-box-heading,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-box-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-6 .fusion-content-box-hover .fusion-read-more:hover:after,
.fusion-content-boxes-6 .fusion-content-box-hover .fusion-read-more:hover:before,
.fusion-content-boxes-6 .fusion-content-box-hover .fusion-read-more:hover,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-link-icon-hover .icon .circle-no,
.fusion-content-boxes-6 .heading .heading-link:hover .content-box-heading {
color: #65bc7b;
}
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-box-hover .icon .circle-no {
color: #65bc7b !important;
}.fusion-content-boxes-6 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button {background: #293f63;color: #ffffff;}.fusion-content-boxes-6 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button .fusion-button-text {color: #ffffff;}
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon > span {
background-color: #65bc7b !important;
}
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-box-hover .heading .icon > span {
border-color: #65bc7b !important;>

Pros:

There are five different cable lengths suitable for a variety of setupsSteel that has been blued for corrosion resistance and durabilityLaser-etched marks for precise cable and wire-pulling distance measurementsTape that is simple to use and has a robust and convenient packaging

Cons:

When first used, it can be a little stiff

Sebring Tip:

The Southwire Flat Steel Fish Tape is a 1/8-inch broad spring steel tape that allows you to pull wires from 25 feet to 240 feet. Depending on your setup, there are five possible wire-pulling choices. I use the 25-foot fishing tape since it’s perfect for the electrical connections in my house.

The tape is made of high-quality blued steel that is meant to last and pull easily. Bluing increases the steel’s corrosion resistance, making it more durable. The tape also contains laser-etched markers to indicate the length of the pull. You’ll get precise measurements and an accurate wire length this way.

.fusion-content-boxes-6 .fusion-content-box-hover .heading-link:hover .icon i.circle-yes,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-box:hover .heading-link .icon i.circle-yes,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon i.circle-yes,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-box-hover .heading .icon i.circle-yes {
background-color: #65bc7b !important;
border-color: #65bc7b !important;>

7. Swanlake Fish Tape Pull Push Kit

.fusion-content-boxes-7 .heading .content-box-heading {color:#cfcfcf;}
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-link-icon-hover .heading .content-box-heading,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-link-icon-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-box-hover .heading .content-box-heading,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-box-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-7 .fusion-content-box-hover .fusion-read-more:hover:after,
.fusion-content-boxes-7 .fusion-content-box-hover .fusion-read-more:hover:before,
.fusion-content-boxes-7 .fusion-content-box-hover .fusion-read-more:hover,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-link-icon-hover .icon .circle-no,
.fusion-content-boxes-7 .heading .heading-link:hover .content-box-heading {
color: #65bc7b;
}
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-box-hover .icon .circle-no {
color: #65bc7b !important;
}.fusion-content-boxes-7 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button {background: #293f63;color: #ffffff;}.fusion-content-boxes-7 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button .fusion-button-text {color: #ffffff;}
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon > span {
background-color: #65bc7b !important;
}
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-box-hover .heading .icon > span {
border-color: #65bc7b !important;>

Pros:

It comes with a variety of head parts suitable for the intended purposeTen fiberglass rods that can be connected to create a custom lengthInstallation is simpleComes with a plastic storage case

Cons:

Fragile and incompatible with curved spaces

Sebring Tip:

Depending on your purpose and the type of wire you want to pull, the Swanlake Fish Tape Pull Push Kit comes with a variety of head tips. It has a search head, an eyelet ring, and a magnetic brass head that connects to the fastener tool on the fish tape.

This set includes ten 13-inch fiberglass rods that can stretch up to ten feet when used together. This tool comes in handy when I’m estimating the amount of cable I’ll need for my ducts and panel boxes. You can also change the whole range of the rods at any time.

.fusion-content-boxes-7 .fusion-content-box-hover .heading-link:hover .icon i.circle-yes,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-box:hover .heading-link .icon i.circle-yes,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon i.circle-yes,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-box-hover .heading .icon i.circle-yes {
background-color: #65bc7b !important;
border-color: #65bc7b !important;>

Buying The Best Fish Tape

The finest fish tape should be durable, easy to insert and remove, portable, and come with an impact-resistant case. These are the major factors we considered while determining the best tape available.

There’s no reason to deal with shoddy fish tape when there are so many high-quality solutions available. However, they can be difficult to come by, which is where we come in.

We review the seven best fish tape brands of 2021 in our quest to find the perfect pair of electrical fish tape. If you follow our advice, you can get a good deal on a good reel of fish tape.

Still not sure what to get? Don’t worry! Check out the buyer’s FAQs below to make sure you are getting the best fish tape for your needs. 

Fish Tape’s Frequently Asked Questions 

Steel or fiberglass fish tape: which is better?

Steel fish tapes and fiberglass fish tapes are two of the most effective choices on the market. Both of these solutions, on the other hand, have their own set of benefits and drawbacks.

Steel fish tapes, for example, are known for their improved tensile strength and heavy-duty. You can utilize the product without difficulty in difficult settings. Wire fishing tools are ideal for dealing with empty conduits when there are no existing wires to contend with. If there are many wires in the conduit, using steel fish tape may make things more difficult.

Meanwhile, fiberglass fish tape is known for being non-conductive. It implies you don’t have to be concerned about any potential electrical hazards. It’s also worth noting that fiberglass fish tapes are more pliable. As a result, these tapes could easily pass through the conduits.

What is the purpose of the fish tape?

Fish tapes can be used to smooth the cables via an electrical conduit, as we described in the introduction. Since you do not have complete control over the procedure, it usually takes a long time. The method becomes streamlined when the different portions of the fish tape are attached at both ends.

A fish tape enables you to finish the process by simply pulling the fish tape after both ends are firmly secured. You can pick between 50m and 100m long fish tapes, depending on your needs. Other factors to consider include the housing’s tensile strength and usefulness.

Is there anything else I can utilize instead of fish tape?

As previously stated, a fish tape can be used to smooth out cable routing. If you don’t have access to this handy device, there are a few alternatives to consider. Here are some of the possibilities available to you, but you’ll have to give up a lot of control and freedom.

A measuring tape is among the most useful tools available. Most electricians, moreover, would have this equipment in their toolboxes. Because this wire is so long, it’s simple to connect the ends to the electrical lines and finish the task.

Other materials like plastic tubing and stiff cables can also be used. Regardless of which choice you choose, you will have to make some compromises in terms of usability. As a result, you should apply the proper adhesive. Due to these difficulties, we recommend obtaining a fish tape if you can afford one. You won’t be disappointed with your decision.

When the fish tape becomes stuck, what do you do?

It might be aggravating to have the fish tape trapped on the pipe. It could be caused by issues with the fish tape or conduit. However, there are a number of choices available to you for resolving the matter.

The first approach involves flipping the fish tape around a few times, as you might expect. It will free the tape from its stuck position, allowing you to move it around easily. You can also use something else to get the fish tape out of its stuck position. It might work if it gets trapped closer to one of the ends.

Conclusion:

An excellent fish tape will make your task a whole lot easier. A bad one can be a pain to work with because it’s challenging to pull in & out, the metal is thin and wears out quickly, or it just doesn’t feel right in your hand when you grip the reel tightly. But Southwire has created an incredible product that solves all of these issues at once: their new 1/8-inch tempered spring steel fish tape won’t wear out as you wind (and unwind) through flooring layers; it provides even tension for easy pulling action, and it feels sturdy enough not to slip from between fingers while gripping firmly on both handles. There are no justifications for not purchasing this fantastic tool!

During a pull, laser-etched footage markings in 12-inch intervals make determining the conduit length incredibly simple. The fish tape itself is available in five different lengths, ranging from 25 to 240 feet.

I was disappointed when I went to buy fish tape and discovered that the one size wasn’t large enough. This is, in my opinion, a complete rip-off! That’s why I’m glad Southwire offers five various wire lengths; there’s a better possibility that my ideal length will be available – so go ahead and order without fear!

To view our Amazon Associates Disclaimer, please click here.

The post 7 Best Fish Tapes [2021 Reviews] appeared first on Luxury Home Remodeling | Sebring Design Build.

Did you miss our previous article…
https://www.amazingsidingstl.com/?p=559

8 Common Renovation Mistakes Homeowners Make that Affect their WiFi Router Performance

Image from PC Mag

Experience poor WiFi signal when enjoying your daily dose of Spotify or Netflix? Flaky internet connection while working from home, or doing home based learning with your children? Guilty of finding a convenient, dark corner to chunk away the plain-looking WiFi router, so that it will not clash with the meticulously designed home interiors?

Read on to find out you can do to rectify your wonky WiFi signal and fix the 6 common mistakes that homeowners make when setting up their WiFi router.


Image from Igyaan

#1. Not planning where the WiFi router should be placed

Did you neglect to plan where the WiFi router should be placed during the home renovation? When it comes to home interior design, most homeowners overlooked the fact that the WiFi router needs to be part of the renovation design, so that it will be able to function optimally. In actuality, the placement of the WiFi router is the most important factor, since a poor location will significantly affect the strength of the signal negatively.

Design:ButGet Studio

What should you do?
 Watch out for common home appliances such as TV, cordless phones, washing machines and dryer and move the WiFi router as far away from them as possible. To ensure that there is an even coverage of the WiFi signal in every corner of your house, you should place your WiFi router at the center of your abode. Boost the WiFi signal further by placing it above the floor level and make sure that it should never be left on the floor.

Do you know?
As the router is a sensitive piece of equipment, it is should be placed in areas where its signals will not be affected. As a general guideline, routers should be placed away from any metal objects, electrical appliances and not be physically obstructed by walls.  This is because metal disrupts WiFi signal and electrical appliances emit electromagnetic waves which will interfere the WiFi signal too.

Design: Swiss Interior Design

 #2. Not placing the WiFi router outside of the Distributor Box (DB)

Distributor box (DB) is commonly used as the networking HQ where the WiFirouter is placed since that is where the data points are located. However, the DB is usually located at an isolated end of the property and as a result, WiFidead spots are created due to the unfavourable location.

Design:I-Chapter

What should you do?

Plan for the WiFi router to be placed at the center of your home. Or consider setting up an additional Access Point (AP) solution to create a Wireless Local Area Network (WLAN) to improve the connectivity. An AP works by connecting to a wired router, switch or hub via an Ethernet cable to project a WiFi signal.

Do you know?
The new BTO and Condominium units are equipped with a network switch and the OpenNet port and these are located in the DB.

Design: Fifth Avenue Interior

 #3. Not adding more Access Points (AP)

Adding more Access Points helps to reduce or eliminate the dead zones where there is no WiFi connectivity.

Design: Archive Design

What should you do?

Decide on where the WiFi router and AP will be placed, prior planning the layout of the high-speed Ethernet cables.

Do you know?
APs are used to extend the wireless coverage of an existing network. A high-speed Ethernet cable from a WiFi router is needed to connect to an AP. This converts the wired signal into a wireless signal.

Design: The Interior Lab

 #4. Not coming up with the location plan before deciding on the carpentry built-ins

If not planned properly, the carpentry built-ins will obstruct the installation of the WiFirouter and AP. In addition, never hide the WiFirouter away within cabinetry as it interferes with the signals.

Design: Fifth Avenue Interior

What should you do?

Share and mark the locations where the WiFirouter and APs should be placed on the floor plan with your interior design professionals. In this way, the interior design professionals can propose the design and location of the carpentry to minimise the obstructions.

Do you know?
Additional power points and wall sockets should also be installed in the same locations, since they house the electrical devices, WiFi router and AP.

Design: The Local INN.Terior

#5. Not considering an open concept design

No walls mean minimal physical obstructions to deflect and affect the WiFi signals.

Design: LOME Interior

What should you do?

Consider applying open concept design for the study rooms, where devices such as computer accessories and peripherals are required to be constantly connected to the WiFirouter.

Do you know?
The cost of hacking wall may vary between S$500 and S$1000, depending on the dimension and thickness of the wall.

Design: Authors • Interior & Styling

#6. Not installing network extenders for an odd-shaped home

Image from Geekabit

WiFi network extenders usually offer a better WiFi performance. This is because they provide a more consistent, reliable, speedy WiFi to almost every corner of your home by communicating directly with the WiFi router. In this way, WiFi network extenders significantly shorten the distance between the receiving devices and the WiFi signal.

Design: DSOD Interior

What should you do?
Get a reliable WiFi extender from this list to boost your network.

Do you know?
The other WiFi boosters include repeaters, which are actually 1st generation WiFi signal extenders, which re-broadcast the WiFi signal received. However, the latency, or WiFi network response time, is increased when repeaters are used. The other WiFi booster is the wireless range extenders, that sit between the WiFi router and the location where better wireless coverage is needed. Similar to a wireless repeater, they grab the signal from the WiFi router and re-broadcasts it. However, the signal is rebroadcast on a different wireless channel from the WiFi router.

Design: Key Concept

#7. Not using wireless mesh routers for a double or triple storey property


Image from Linksys

A traditional WiFi router setup usually is made of single receiver, and a couple of WiFi boosters when the wireless signal is poor. However, the mesh WiFi routers, or known as whole home WiFi systems, are made of several satellite modules, or nodes. These modules are meant to be placed around the home interiors for a full WiFi coverage. In this way, mesh WiFi routers are able to deliver strong and the most consistent WiFi signal in the entire house. Unlike the traditional WiFi router setup, the mesh WiFi routers are part of a single wireless network that shares the same Service Set Identifier (SSID), which is also the name for a WiFi network.

Design: Weiken.Com

What should you do?
If your ageing traditional WiFi router is due for a tech refresh, you should consider checking out the following best WiFi mesh network systems!

Do you know?
Mesh WiFi routers are recommended for large homes, homes with double or triple floors or odd-shaped home with WiFi dead zones. Such a multi-node system is typically easy to set up and also, being wireless also makes it easy for homeowners to decide where to place these routers. 

Design: Aesthete Interior Design

#8. Not knowing the following WiFi router best practices:

. Not ensuring that the WiFi router is always updated with the latest firmware

Firmware updates are important because critical patches for security holes as usually packaged together with the update. Once the WiFi router has been updated, the performance, stability and security of the WiFi router are enhanced. In this way, the WiFi router has a faster response and is safer to use too.

Design: Ascend Designs

What should you do?

Launch a web browser on your computer or mobile device and login to your router. Look out for the option “Firmware/Router Update” and click install. Wait for the firmware to be updated and reboot the WiFi router once the installation is completed.

Do you know?
Keeping the WiFi router updated is important since once it is infected with a malware, it will eat up the bandwidth, slows down the devices connected to the router. The malware might also proliferates across the network and infects the other devices connected to the router.

Design: Fineline Design

B. Not rebooting the WiFi router

The WiFi router is similar to your computer and hence, a daily reboot helps to clear its memory. In addition, always check for the latest firmware updates and make sure that the security patches are applied. In addition, do note that the firmware updates and patches are only applied after the WiFi router has been rebooted.

Design: Neu Konceptz

What should you do?
You must reboot the WiFi router immediately after the updates and patches have been installed.

Do you know?
Make sure to turn off the WiFi router after the end of each day.

Design: The Scientist

 C. Not changing the WiFi router default password settings

Most of the WiFi routers are shipped with a default password and it is very easy to guess. Some do not even come with a password so that you can gain direct access to the WiFi router’s settings when you are using it the first time. When the default password is not changed, anyone can easily hack into the WiFi router, steal its bandwidth or even lock you out by changing its settings.

Design: The Interior Lab

What should you do?

You must replace the default password with a strong password during the initial setup. A strong password should have a combination of uppercase and lowercase letters, symbols and numbers. Avoid the common passwords listed here. The password should be at least 8 characters long and never use personal information in the password.

Do you know?
Default router passwords can be found in the WiFi router manuals. In this way, if you encounter issues setting up the router, you can simply refer to the manual for the default password. A WiFi router password is not the same as the WiFi password. The former password is used to access the router’s settings while the latter password is used to access the WiFi network.

Design: Space Factor

D. Using a weak password for the WiFi network

When your WiFi password is weak, such hackers will exploit the weakness and steal your WiFi bandwidth. When this happens, the smaller bandwidth will mean slower WiFi performance.

Design: LOME Interior

What should you do?

You must use difficult to guess and complicated password to secure your WiFi and remember to change the password on a regular basis.

Do you know?
Many hackers rely on open source password crackers to crack weak passwords easily. Some simply uses brute force by cycling through the known words, personal info, alphabet, numbers in all different combinations until the password is found.

Design: NIJ Design Concept

if(!gform){document.addEventListener(“gform_main_scripts_loaded”,function(){gform.scriptsLoaded=!0}),window.addEventListener(“DOMContentLoaded”,function(){gform.domLoaded=!0});var gform={domLoaded:!1,scriptsLoaded:!1,initializeOnLoaded:function(o){gform.domLoaded&&gform.scriptsLoaded?o():!gform.domLoaded&&gform.scriptsLoaded?window.addEventListener(“DOMContentLoaded”,o):document.addEventListener(“gform_main_scripts_loaded”,o)},hooks:{action:{},filter:{}},addAction:function(o,n,r,t){gform.addHook(“action”,o,n,r,t)},addFilter:function(o,n,r,t){gform.addHook(“filter”,o,n,r,t)},doAction:function(o){gform.doHook(“action”,o,arguments)},applyFilters:function(o){return gform.doHook(“filter”,o,arguments)},removeAction:function(o,n){gform.removeHook(“action”,o,n)},removeFilter:function(o,n,r){gform.removeHook(“filter”,o,n,r)},addHook:function(o,n,r,t,i){null==gform.hooks[o][n]&&(gform.hooks[o][n]=[]);var e=gform.hooks[o][n];null==i&&(i=n+”_”+e.length),null==t&&(t=10),gform.hooks[o][n].push({tag:i,callable:r,priority:t})},doHook:function(o,n,r){if(r=Array.prototype.slice.call(r,1),null!=gform.hooks[o][n]){var t,i=gform.hooks[o][n];i.sort(function(o,n){return o.priority-n.priority});for(var e=0;eComplete this form and we will recommend you a list of reputable interior design firms that fit your renovation requirements. It’s free! Note: This form is not applicable for repair works request.How many interior designers do you wish to get in touch with?3 – 55 – 8

My Property

My Property Type isHDBApartment/CondominiumPrivate HouseCommercialThe room type isPlease selectStudio2 Rooms3 Rooms4 Rooms5 RoomsAbove 5 RoomsProperty StatusNewResalePresently StayingKey Collection TimeYes, Key is collectedNo, in 1 – 3 months timeNo, in 3 – 6 months timeNo, in 7 – 12 months timeHave not purchase the unitProperty AddressUpload your Floor PlanAccepted file types: jpg, gif, png, pdf, ppt, jpeg, Max. file size: 2 MB.We recommend to attach your floor plan for a better estimate. File must less than 2MB.

Project Info

Area(s) you need to renovateLiving RoomDining RoomKitchenBedroomsBathroomsOthersWhole unitPreferred design styleNo PreferenceAsianClassicContemporaryEclecticIndustrialMediterraneanMidcenturyMinimalismModernRetroRusticScandinavianTraditionalTransitionalTropicalVictorianVintageMy project priority isPlease selectAesthetically Nice – I want good designCost effectiveness – I’m on a tight budgetMy renovation budget isPlease selectNot Fixed20,000 and Below20,001 – 30,00030,001 – 40,00040,001 – 60,00060,001 – 80,00080,001 – 100,000100,001 – 200,000200,001 & AboveDo you require renovation loan?Please selectYes, please call meNo. I don’tOther information?

My Contact Details

My name isFirstLastMy Email isYou can call me atHow Did You Get To Know Us?Please selectGoogleFacebookInstagramYahooEvents/RoadshowFriendsNewsletterRenoNation MagazineThe Straits TimesSME MagazineBingMSN Search

 

AgreementI acknowledge that the details provided in this form will be shared with Renonation.sg and the recommended interior design firms.AgreementI wish to receive home renovation inspiration, tips and guides from Renonation.sgEmailThis field is for validation purposes and should be left unchanged.
gform.initializeOnLoaded( function() {gformInitSpinner( 5, ‘https://www.renonation.sg/wp-content/plugins/gravityforms/images/spinner.svg’ );jQuery(‘#gform_ajax_frame_5’).on(‘load’,function(){var contents = jQuery(this).contents().find(‘*’).html();var is_postback = contents.indexOf(‘GF_AJAX_POSTBACK’) >= 0;if(!is_postback){return;}var form_content = jQuery(this).contents().find(‘#gform_wrapper_5’);var is_confirmation = jQuery(this).contents().find(‘#gform_confirmation_wrapper_5’).length > 0;var is_redirect = contents.indexOf(‘gformRedirect(){‘) >= 0;var is_form = form_content.length > 0 && ! is_redirect && ! is_confirmation;var mt = parseInt(jQuery(‘html’).css(‘margin-top’), 10) + parseInt(jQuery(‘body’).css(‘margin-top’), 10) + 100;if(is_form){jQuery(‘#gform_wrapper_5’).html(form_content.html());if(form_content.hasClass(‘gform_validation_error’)){jQuery(‘#gform_wrapper_5’).addClass(‘gform_validation_error’);} else {jQuery(‘#gform_wrapper_5’).removeClass(‘gform_validation_error’);}setTimeout( function() { /* delay the scroll by 50 milliseconds to fix a bug in chrome */ jQuery(document).scrollTop(jQuery(‘#gform_wrapper_5’).offset().top – mt); }, 50 );if(window[‘gformInitDatepicker’]) {gformInitDatepicker();}if(window[‘gformInitPriceFields’]) {gformInitPriceFields();}var current_page = jQuery(‘#gform_source_page_number_5’).val();gformInitSpinner( 5, ‘https://www.renonation.sg/wp-content/plugins/gravityforms/images/spinner.svg’ );jQuery(document).trigger(‘gform_page_loaded’, [5, current_page]);window[‘gf_submitting_5’] = false;}else if(!is_redirect){var confirmation_content = jQuery(this).contents().find(‘.GF_AJAX_POSTBACK’).html();if(!confirmation_content){confirmation_content = contents;}setTimeout(function(){jQuery(‘#gform_wrapper_5’).replaceWith(confirmation_content);jQuery(document).scrollTop(jQuery(‘#gf_5’).offset().top – mt);jQuery(document).trigger(‘gform_confirmation_loaded’, [5]);window[‘gf_submitting_5’] = false;wp.a11y.speak(jQuery(‘#gform_confirmation_message_5’).text());}, 50);}else{jQuery(‘#gform_5’).append(contents);if(window[‘gformRedirect’]) {gformRedirect();}}jQuery(document).trigger(‘gform_post_render’, [5, current_page]);} );} );>

Did you miss our previous article…
https://www.amazingsidingstl.com/?p=526

Josef Frank Scandinavian Modern wallpaper — 12 historic designs still available today

Josef Frank’s archival wallpaper from designs he created from around 1920 to 1950 have proved to be timeless — complex yet calming, whimsical yet sophisticated — and as suitable for trendy interiors today (wallpaper is having another cyclical ‘moment’) as they are for owners of mid century homes who want to stay true to the…

The post Josef Frank Scandinavian Modern wallpaper — 12 historic designs still available today appeared first on Retro Renovation.

Did you miss our previous article…
https://www.amazingsidingstl.com/?p=525

7 Best Roofing Nail Guns [2021 Reviews]

best-coil-roofing-nail-gun-reviews-sebring-design-build

Featured Image: Amazon

You want to ensure you have the proper tool when it comes to repairing a roof. Ideally, if you’re fixing your roof, this isn’t something you’ll have to do frequently. Nevertheless, having a roofing nail gun may make the task a lot simpler. When a storm hits and you need to replace some tiles, you’ll be glad you have this powerful tool in your toolbox.

If you’re looking to buy a roofing nailer but aren’t sure where to start, you’ve come to the perfect spot. We will discuss all you need to know about roofing nail guns before you purchase one, and look at some of the finest roofing nail guns on the market right now.

.fusion-fullwidth.fusion-builder-row-1 { overflow:visible; }1.>

BOSTITCH Coil Roofing Nailer, 1-3/4-Inch to 1-3/4-Inch (RN46)
BOSTITCH Coil Roofing Nailer, 1-3/4-Inch to 1-3/4-Inch (RN46) The sliding nail gun has lightweight aluminum housing for job site durabilityZero nail lockout feature of the siding nailer eliminates dry firing and indicates when to reload the magazineNosepiece of the coil siding nailer features carbide inserts for long-life performanceAggressive wear guards and skid pads protect the tool from damage on abrasive surfacesQuick-set adjustable depth guide sets nails to desire depths quickly and convenientlyCheck Price Below

Buy on Amazon>

2.>

Hitachi NV45AB2 7/8-Inch to 1-3/4-Inch Coil Roofing Nailer (Side Load) (Discontinued by the Manufacturer)
Hitachi NV45AB2 7/8-Inch to 1-3/4-Inch Coil Roofing Nailer (Side Load) (Discontinued by the Manufacturer) Hitachi Power Tools has renamed to Metabo HPT; Same great tools, with only a new nameCheck Price Below

Buy on Amazon>

3.>

Senco Roof Pro 455XP Nailer With Sequential Actuation Trigger 3D0101N
Senco Roof Pro 455XP Nailer With Sequential Actuation Trigger 3D0101N This product is easy to use.This product is highly durableThis product is manufactured in ChinaDrives 11 gauge (.120″) , full round head roofing nails 3/4″ 1-3/4″ smooth shank.360 degree adjustable exhaustCheck Price Below

Buy on Amazon>

4.>

PORTER-CABLE RN175B Roofing Nailer
PORTER-CABLE RN175B Roofing Nailer The product is Coil Roofing NailerEasy to useThe product is manufactured in ChinaCompact body design is 5-percent lighter for improved balance and control compared to previous modelTool-free adjustable shingle guide for accurate shingle placementCheck Price Below

Buy on Amazon>

5.>

WEN 61782 3/4-Inch to 1-3/4-Inch Pneumatic Coil Roofing Nailer with Carrying Case
WEN 61782 3/4-Inch to 1-3/4-Inch Pneumatic Coil Roofing Nailer with Carrying Case Fire 11-gauge nails (.12 inches) anywhere from 3/4 to 1-3/4 of an inchAdjustable shingle guide and depth control makes for easy shingle spacing during jobsHolds up to 120 nails at a time with a quick release for easily fixing jamsUses pneumatic operating pressure anywhere from 70 to 120 PSINOTE: unit may arrive in one of two color schemes; yellow and blue or orange and blackCheck Price Below

Buy on Amazon>

6.>Sale

MAX USA CORP SuperRoofer CN445R3 Roofing Coil Nailer up to 1-3/4'
MAX USA CORP SuperRoofer CN445R3 Roofing Coil Nailer up to 1-3/4″ REDUCED TAR BUILD UP: Tar resistant nose is designed to resist tar 8x longer than conventional tools. When necessary, the SuperRoofer’s contact foot is easy to remove, clean and is also inexpensive to replace.SELF-CLEANING FILTER FOR RELIABLE OPERATIONS: The patented, self-cleaning maintenance free end cap filter, captures foreign substances before they can enter the tool and automatically safely ejects them when the air hose is disconnected.SIMPLE TOOL MAINTENANCE: A removable contact foot allows roofers to safely maintain and clean components of the tool without having to submerge the tool in corrosive cleaning agents.NO NAIL WASTE OR JAMS: A nose magnet holds the last nail in place, allowing contractors to use every nail in the coil; it also prevents the tool from jamming.CONSISTENTLY AND ACCURATELY SHOOTS NAILS: The depth adjustment dial allows operators to effortlessly drive nails into hard materials, and also control depth of drive when fastening soft materials, for a consistently polished finish.Check Price Below

Buy on Amazon>

7.>

HBT HBCN45P 3/4'' to 1-3/4'' Coil Roofing Nailer with Magnesium Housing
HBT HBCN45P 3/4” to 1-3/4” Coil Roofing Nailer with Magnesium Housing Drives 11 gauge full head coil roofing nails ranging from 7/8” To 1-3/4”Selective actuation switch allows for either sequential or contact modeTool-free adjustable depth control helps set nails properly; adjustable shingle guide allows for quick and consistent shingle spacingDurable and lightweight magnesium housing helps reduce user fatigueSkid-resistant pads/wear guards for safety and tool protection; contact safety With Carbide inserts for less wear and tearCheck Price Below

Buy on Amazon>

1. Bostitch Coil Roofing Nailer

.fusion-content-boxes-1 .heading .content-box-heading {color:#cfcfcf;}
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-link-icon-hover .heading .content-box-heading,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-link-icon-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box-hover .heading .content-box-heading,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-1 .fusion-content-box-hover .fusion-read-more:hover:after,
.fusion-content-boxes-1 .fusion-content-box-hover .fusion-read-more:hover:before,
.fusion-content-boxes-1 .fusion-content-box-hover .fusion-read-more:hover,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-link-icon-hover .icon .circle-no,
.fusion-content-boxes-1 .heading .heading-link:hover .content-box-heading {
color: #65bc7b;
}
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box-hover .icon .circle-no {
color: #65bc7b !important;
}.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button {background: #293f63;color: #ffffff;}.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button .fusion-button-text {color: #ffffff;}
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon > span {
background-color: #65bc7b !important;
}
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box-hover .heading .icon > span {
border-color: #65bc7b !important;>

Pros:

Extremely versatileSimple to use and balanceIt’s simple to load and very powerful

Cons:

You may experience double nailing until you’ve become accustomed to it

Sebring Tip:

Bostitch is another industry leader for nail guns, and their roofing nailer is no exception. Its characteristics make it a reliable option for several different tasks, including exterior drywall work, insulation boards, and fiber cement. The depth adjustment drive is one of the features that makes it so flexible, with five distinct settings. The side-load canister and zero-nail lockout let you keep moving while preventing dry firing.

The gun can carry up to 100 nails ranging in length from 3/4 inch to 1 3/4 inch. These options are ideal for shallow driving and countersinking applications that need flush mounting. There are skid pads to prevent markings and a carbide inlay in the nose guard for extended life.

.fusion-content-boxes-1 .fusion-content-box-hover .heading-link:hover .icon i.circle-yes,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box:hover .heading-link .icon i.circle-yes,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon i.circle-yes,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box-hover .heading .icon i.circle-yes {
background-color: #65bc7b !important;
border-color: #65bc7b !important;>

2. Hitachi Coil Roofing Nailer

.fusion-content-boxes-2 .heading .content-box-heading {color:#cfcfcf;}
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-link-icon-hover .heading .content-box-heading,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-link-icon-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box-hover .heading .content-box-heading,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-2 .fusion-content-box-hover .fusion-read-more:hover:after,
.fusion-content-boxes-2 .fusion-content-box-hover .fusion-read-more:hover:before,
.fusion-content-boxes-2 .fusion-content-box-hover .fusion-read-more:hover,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-link-icon-hover .icon .circle-no,
.fusion-content-boxes-2 .heading .heading-link:hover .content-box-heading {
color: #65bc7b;
}
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box-hover .icon .circle-no {
color: #65bc7b !important;
}.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button {background: #293f63;color: #ffffff;}.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button .fusion-button-text {color: #ffffff;}
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon > span {
background-color: #65bc7b !important;
}
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box-hover .heading .icon > span {
border-color: #65bc7b !important;>

Pros:

Nail depth may be easily adjusted using a knobIt’s ideal for both hot and cold weatherLightweight and well-balanced

Cons:

7/8 inch nails may not drive straight

Sebring Tip:

Hitachi is a well-known brand that produces high-quality roofers that can be fired in contact or sequential manner. It also features a depth firing option, allowing you to use it with a range of roofing materials for a consistent nail drive and hold. When working on the job, the coil feed provides a fast and simple side reload.

The magazine can contain 120 nails ranging in size from 7/8 inch to 1 3/4 inch. The nailer is very light, weighing just 5.5 pounds, and it is simple to operate without becoming fatigued. It can be seen on a roof without sliding because of the rubberized surface, and it can withstand the toughest weather.

.fusion-content-boxes-2 .fusion-content-box-hover .heading-link:hover .icon i.circle-yes,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box:hover .heading-link .icon i.circle-yes,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon i.circle-yes,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box-hover .heading .icon i.circle-yes {
background-color: #65bc7b !important;
border-color: #65bc7b !important;>

3. Senco Roof Pro 455XP Nailer w/ Sequential Actuation Trigger

.fusion-content-boxes-3 .heading .content-box-heading {color:#cfcfcf;}
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-link-icon-hover .heading .content-box-heading,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-link-icon-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box-hover .heading .content-box-heading,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-3 .fusion-content-box-hover .fusion-read-more:hover:after,
.fusion-content-boxes-3 .fusion-content-box-hover .fusion-read-more:hover:before,
.fusion-content-boxes-3 .fusion-content-box-hover .fusion-read-more:hover,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-link-icon-hover .icon .circle-no,
.fusion-content-boxes-3 .heading .heading-link:hover .content-box-heading {
color: #65bc7b;
}
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box-hover .icon .circle-no {
color: #65bc7b !important;
}.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button {background: #293f63;color: #ffffff;}.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button .fusion-button-text {color: #ffffff;}
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon > span {
background-color: #65bc7b !important;
}
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box-hover .heading .icon > span {
border-color: #65bc7b !important;>

Pros:

Stylish and well-balancedWear plates and body are very durableAll maintenance tools are included in the case

Cons:

It’s possible that the depth adjustment won’t be consistentMultiple firing occasionally

Sebring Tip:

Senco is well-known in the roofing sector for its long-lasting nailers. You can handle a broad range of roofing materials with the capacity to drive 11 gauge nails at 3/4th inch to 1 3/4th inch. It also features an easy-to-adjust drive depth control to guarantee a snug fit every time. The exhaust is also 360-degree swivel-adjustable to prevent air from blowing back on you as you work.

It’s still light enough for one-handed use, and it frees up a hand for balance and reliable nail placement at 5.5 pounds. The contact actuation trigger enables quick-firing sequences while also ensuring safety and assisting with nail placement.

.fusion-content-boxes-3 .fusion-content-box-hover .heading-link:hover .icon i.circle-yes,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box:hover .heading-link .icon i.circle-yes,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon i.circle-yes,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box-hover .heading .icon i.circle-yes {
background-color: #65bc7b !important;
border-color: #65bc7b !important;>

4. Porter Cable Roofing Nailer

.fusion-content-boxes-4 .heading .content-box-heading {color:#cfcfcf;}
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-link-icon-hover .heading .content-box-heading,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-link-icon-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box-hover .heading .content-box-heading,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-4 .fusion-content-box-hover .fusion-read-more:hover:after,
.fusion-content-boxes-4 .fusion-content-box-hover .fusion-read-more:hover:before,
.fusion-content-boxes-4 .fusion-content-box-hover .fusion-read-more:hover,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-link-icon-hover .icon .circle-no,
.fusion-content-boxes-4 .heading .heading-link:hover .content-box-heading {
color: #65bc7b;
}
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box-hover .icon .circle-no {
color: #65bc7b !important;
}.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button {background: #293f63;color: #ffffff;}.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button .fusion-button-text {color: #ffffff;}
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon > span {
background-color: #65bc7b !important;
}
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box-hover .heading .icon > span {
border-color: #65bc7b !important;>

Pros:

Exceptionally consistentIt’s tough & can withstand being droppedIt’s well-balanced and simple to use

Cons:

It does not include a coupler

Sebring Tip:

Many professionals and amateurs use Porter Cable roofing nailers as all-around nail guns because they know they will receive a good product. The brand specializes in nailers, and their roofing nailer options are some of the finest on the market. This model has an adjustable shingle guide as well as a depth guide to help you stay on track. These tool-less features are simple to use and work well with the bump or sequential firing techniques you may choose from.

The dual-door magazine enables quick reloading on the job, and it also includes skid pads and wear-resistant shields to protect surfaces and extend the magazine’s life. It can quickly shoot a 3/4ths inch to 1 3/4ths inch nail, much as most other roofing guns.

.fusion-content-boxes-4 .fusion-content-box-hover .heading-link:hover .icon i.circle-yes,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box:hover .heading-link .icon i.circle-yes,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon i.circle-yes,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box-hover .heading .icon i.circle-yes {
background-color: #65bc7b !important;
border-color: #65bc7b !important;>

5. Wen 61782 Coil Roofing Nailer

.fusion-content-boxes-5 .heading .content-box-heading {color:#cfcfcf;}
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-link-icon-hover .heading .content-box-heading,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-link-icon-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-box-hover .heading .content-box-heading,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-box-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-5 .fusion-content-box-hover .fusion-read-more:hover:after,
.fusion-content-boxes-5 .fusion-content-box-hover .fusion-read-more:hover:before,
.fusion-content-boxes-5 .fusion-content-box-hover .fusion-read-more:hover,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-link-icon-hover .icon .circle-no,
.fusion-content-boxes-5 .heading .heading-link:hover .content-box-heading {
color: #65bc7b;
}
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-box-hover .icon .circle-no {
color: #65bc7b !important;
}.fusion-content-boxes-5 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button {background: #293f63;color: #ffffff;}.fusion-content-boxes-5 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button .fusion-button-text {color: #ffffff;}
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon > span {
background-color: #65bc7b !important;
}
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-box-hover .heading .icon > span {
border-color: #65bc7b !important;>

Pros:

Reasonable pricingHolds a range of nail sizes in a large magazineA durable plastic case is included

Cons:

It’s just good for one taskJams sometimesCan double shootWhen compared to other roofing nailers, this one is heavy

Sebring Tip:

This is a low-cost, user-friendly roofing nailer that’s ideal for completing a couple of jobs. It’s efficient, and buying one will save you money over renting one for the length of the project.

This nailer is a great value for the money. It has many of the same features as some of the higher-end versions, such as a 120-nail magazine capacity and the ability to fire the same gauge nails from 3/4 to 1 3/4 inch. It’s tough and may last a long time without needing to be refilled.

.fusion-content-boxes-5 .fusion-content-box-hover .heading-link:hover .icon i.circle-yes,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-box:hover .heading-link .icon i.circle-yes,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon i.circle-yes,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-box-hover .heading .icon i.circle-yes {
background-color: #65bc7b !important;
border-color: #65bc7b !important;>

6. MAX CN445R3 Coil Roofing Nailer

.fusion-content-boxes-6 .heading .content-box-heading {color:#cfcfcf;}
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-link-icon-hover .heading .content-box-heading,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-link-icon-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-box-hover .heading .content-box-heading,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-box-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-6 .fusion-content-box-hover .fusion-read-more:hover:after,
.fusion-content-boxes-6 .fusion-content-box-hover .fusion-read-more:hover:before,
.fusion-content-boxes-6 .fusion-content-box-hover .fusion-read-more:hover,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-link-icon-hover .icon .circle-no,
.fusion-content-boxes-6 .heading .heading-link:hover .content-box-heading {
color: #65bc7b;
}
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-box-hover .icon .circle-no {
color: #65bc7b !important;
}.fusion-content-boxes-6 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button {background: #293f63;color: #ffffff;}.fusion-content-boxes-6 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button .fusion-button-text {color: #ffffff;}
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon > span {
background-color: #65bc7b !important;
}
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-box-hover .heading .icon > span {
border-color: #65bc7b !important;>

Pros:

Getting a lot of positive feedbackDepth adjustment without the use of any toolsFilter cap to keep dust and debris out of the filterThe air hose may be kept out of your way thanks to the tangle-free swivel fitting

Cons:

It’s a little expensiveThere are no carrying cases availableManual depth adjustment is somewhat off

Sebring Tip:

The MAX CN445R3 SuperRoofer nailer is a tool that is often overlooked. People who adore it rave about it. Therefore, we’ve included it in our reviews. Thanks to the rubber grip, this lightweight roofing nailer weighs just 5.2 pounds and is simple to grasp. The tangle-free swivel fitting allows the air hose to rotate, allowing you to move the nailer around more easily. All of these factors help to make lengthy tasks more pleasant. You can work for longer periods of time and finish more quickly.

.fusion-content-boxes-6 .fusion-content-box-hover .heading-link:hover .icon i.circle-yes,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-box:hover .heading-link .icon i.circle-yes,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon i.circle-yes,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-box-hover .heading .icon i.circle-yes {
background-color: #65bc7b !important;
border-color: #65bc7b !important;>

7. HBT HBCN45P Coil Roofing Nailer

.fusion-content-boxes-7 .heading .content-box-heading {color:#cfcfcf;}
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-link-icon-hover .heading .content-box-heading,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-link-icon-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-box-hover .heading .content-box-heading,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-box-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-7 .fusion-content-box-hover .fusion-read-more:hover:after,
.fusion-content-boxes-7 .fusion-content-box-hover .fusion-read-more:hover:before,
.fusion-content-boxes-7 .fusion-content-box-hover .fusion-read-more:hover,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-link-icon-hover .icon .circle-no,
.fusion-content-boxes-7 .heading .heading-link:hover .content-box-heading {
color: #65bc7b;
}
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-box-hover .icon .circle-no {
color: #65bc7b !important;
}.fusion-content-boxes-7 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button {background: #293f63;color: #ffffff;}.fusion-content-boxes-7 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button .fusion-button-text {color: #ffffff;}
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon > span {
background-color: #65bc7b !important;
}
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-box-hover .heading .icon > span {
border-color: #65bc7b !important;>

Pros:

Skid-resistant cushioningAdjustment without the need of any toolsThe shingle guide is adjustableIt’s really lightAllows for a variety of nail sizes

Cons:

Jam downtime and may not load properly at times

Sebring Tip:

The HBT roofing nail gun is designed to drive 11-gauge coil nails with sizes ranging from 7/8 inch to 1-3/4 inch, offering you additional options. The built-in actuation choices allow you to switch between sequential and contact modes at any time, and the easy changeable shingle guide system allows you to modify the customizable depth without any additional equipment. In addition, the tool’s front was designed with skid-resistant materials and a wear guard for greater protection, as well as a lightweight magnesium housing to decrease weight and enhance mobility.

.fusion-content-boxes-7 .fusion-content-box-hover .heading-link:hover .icon i.circle-yes,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-box:hover .heading-link .icon i.circle-yes,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon i.circle-yes,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-box-hover .heading .icon i.circle-yes {
background-color: #65bc7b !important;
border-color: #65bc7b !important;>

Roofing Nail Gun Buying Guide

It’s critical to know what you’ll be utilizing a roofing nailer for before purchasing one. Obviously, you’ll use it for roofing, but how will you use it? Is it simply the roof of your shed or an extension to your home that you’re working on? Or are you a roofing contractor who will be using your nailer on a slew of jobs? While a low-cost roofing nailer may get you through one or two minor tasks, it’s unlikely to be adequate to do job after job. With that in mind, here are a few more things to think about.

Durability

If you’re a contractor, this is particularly essential since you want a tool that will endure. 

Most roof nailers are intended to survive some exposure to the weather since they are meant to be used outside. They’re usually made of aluminum and steel, and they’re very sturdy.

Construction

It may seem ridiculous, but the way a roofing nailer feels may tell you a lot about its quality. You should feel like you’re carrying a tough piece of equipment when you take it up, despite how light it is. The higher the quality of your roofing nailer, the longer it will endure.

Versatility

When it comes to flexibility, there are two factors to consider. First and foremost, can the nailer be used for purposes other than roofing? Some will come with accessories that enable you to use them for other outside chores, such as siding installation.

Second, what kind of materials can you nail with your roofing nailer? Some are extremely adaptable and may be used on waterproof tar paper, asphalt and fiberglass shingles, vinyl and aluminum siding, and so forth.

Another item to consider is weatherproofing. It would be ideal if all roofing work could be completed during the warm, dry months, but this isn’t always possible. While you should never work on a roof while it’s raining, your roofing nailer will almost certainly be exposed to moisture. During the colder months, you’re even more likely to require it. Check to see whether your nailer can take a little water and won’t freeze in the cold.

Obviously, the more functions a roofing nailer has, the better purchase it will be. This is important to remember, particularly if you are spending a significant amount of money on your purchase.

Safety

Safety is always a priority, but utilizing this specific equipment on a roof adds an additional layer of risk and necessitates extra caution.

Rubber grips are a little detail that makes a huge impact. Not only will this make it simpler to grip and manage the nailer, but it will also offer some friction on a sloping roof. The grips really prevent the nailer from slipping and potentially tumbling away from you. A fall may damage your tool permanently, but it also poses a significant safety danger to anybody in the area below.

Injuries to the feet and hands are unfortunately frequent while using nail guns. When possible, use sequential mode and always use protective gear, particularly safety glasses.

Useful Accessories To Have In A Roofing Nail Gun

There are a few items that are great to have but don’t actually impact the performance of your coil nailer:

A case. It’s a good idea to have a sturdy plastic storage box on hand. It provides you someplace to store your gun when you’re not using it, even if it’s only to keep it dry at the end of the day until you need it again the following day.

Directional Exhaust. This is one of the things that you don’t know how useful until you put it to use. It’s a lot more pleasant to work if you can keep the trash and air out of your face.

Tool-less depth adjustment. It’s as simple as turning a dial. While you won’t achieve the same precision as a manual adjustment, some of the best nailers have created tool-free adjustments that are fairly close.

Jam clearing. While excellent firearms shouldn’t jam all that frequently, it’s unavoidable that you’ll have to deal with one at some point. Having a simple method to break out of a jam may help you feel less frustrated and get back to work faster.

Other Factors To Consider When Buying A Roofing Nail Gun

Because there are so many various roofing nailers to choose from, it’s a good idea to familiarize yourself with the characteristics of each before making a purchase. We’ll go over some of the differences in roofing nailers in our purchasing guide so you can determine which one is perfect for you.

Pneumatic or Cordless Power Supply?

The first choice you’ll have to make is whether you want a pneumatic or cordless roofing nailer. A rechargeable battery & a butane gas canister are placed inside a cordless roofing nail gun. With an electric roofing nailer, you have more freedom since all you have to do is make sure the battery is charged beforehand, and you can work on your roof without having to worry about cables getting your way. You may also buy extra backup batteries to put on the roof with you in case your main battery dies.

Nail Type: Can all nail sizes be accommodated by roofing nail guns?

When purchasing coil roofing nails for a nail gun, be sure to verify the size of nails that the roofing nailer can handle. If you’re a professional, you should get a roofing nailer that can accept a wide variety of roofing nails so you can utilize it for any project. A decent nailer should be able to handle a variety of thicknesses ranging from 7/8″ to 1.75″. It’s possible that a roofing nailer isn’t the best equipment for the task and that a roofing staple gun is required.

Drive Depth: Is it simple to adjust?

The roofing nail gun must be able to vary the depth of drive with which the nail is placed since roofs are constructed of a range of materials. It’s beneficial if your roofing nailer offers a simple method to modify this to make nail gun repair work go more smoothly and efficiently. Some tools feature a scrolling wheel for adjusting the depth of drive, while others have a trigger system for doing so. It’s ideal to choose a nail gun with a tool-free adjustment feature like the Dewalt roofing nailer, since otherwise, it may be time-consuming and difficult. 

Conclusion:

Choosing a decent roofing nailer may be challenging due to the fact that there are some powerful ones on the market with impressive promises. Our top seven picks demonstrate this, and they’re all reliable and capable of completing even the most challenging roofing projects. Because of how many tasks it may be used for, we believe the Bostitch Coil Roofing Nailer is the most flexible option and a favorite among homeowners.

This Bostitch roofing nailer is solid and fast, capable of driving 100 nails per minute. When the magazine runs empty, zero nail lockout prevents the nailer from firing. Then, for quick loading, utilize the unique single-action side canister. Open it, replace the coil of nails, and you’re good to go.

This nailer is unique in that it utilizes contact tip automatic firing. This is an excellent method for big projects because it allows you to cover a wide area by bouncing over the surface and firing the nail when the tip strikes the substance. To ensure that the nose is robust enough to survive this technique, it includes a carbide inlay.

You also get tool-free depth of drive adjustments with five pre-sets so you can make your choice fast and simply get back to work.

It doesn’t come with an air hose connection, but if you have a toolbox, you’re likely to have one on hand. It also doesn’t include a carrying case, which is cumbersome after you’ve completed the task. However, they are minor flaws.

To view our Amazon Associates Disclaimer, please click here.

The post 7 Best Roofing Nail Guns [2021 Reviews] appeared first on Luxury Home Remodeling | Sebring Design Build.

Did you miss our previous article…
https://www.amazingsidingstl.com/?p=515

[Cleaning Tips] 5 Major Taboos and Maintenance Methods of Induction Cooker

More and more people love to use induction cooker, but sometimes they are accidentally spilling the soup or sauce on the cooker surface and fail to clean it immediately. After a period of time, there are dirt spots and burning spots, we may find it difficult to clean. We will teach you effective ways to clean the induction cooker and the maintenance of it.

Interior Design: Key Concept

Ways of Cleaning an Induction Cooker

When cooking with an induction cooker, it is recommended to simply clean it when there is residual temperature after each cooking to prevent food residues from staying on the glass surface and becoming a difficult-to-clean spot over time.

If there is stubborn dirt on the stove, there is a chance that the bottom of the pot scratched the glass surface of the induction cooker, causing dirt to accumulate, or the food will stay between the pot and the induction cooker and caused scorching. The following methods can be used for cleaning:

Use hot water and add white vinegar, soak the dirty area, and place a towel soaked in white vinegar on the dirty area for one hour. Allow the white vinegar to penetrate, prepare a scraper with a flat blade, and then scrape away the dirt. Keep the angle between the blade and the glass surface at about 30 degrees to remove most of the dirt.

In addition, there are some induction cookers cleaning detergents in the market, just like white vinegar, which also has the effect of softening stubborn dirt. You can also wait for a period of time to let it penetrate, then use a soft cloth or a specialized glass scraper to remove the dirt. Remember to pay attention to whether the cleaning detergents are suitable for your induction cooker and follow the instructions on the detergent to avoid any malpractice and result in damaging your induction cooker.

Interior Design: Lemonfridge Studio

Precautions for Maintenance Work of Induction Cooker

The induction cooker has a high input power. Like air conditioners and refrigerators, a separate and individual socket is required.The induction cooker has air inlets and outlets. When using the induction cooker, do not block the periphery and bottom, and keep the area well ventilated to prevent the heating panel of the induction cooker from overheatingSome induction cookers are equipped with fans to help the dissipation of heat. After cooking with the induction cooker, do not turn off the power immediately. Allow time for the bottom of the stove to dissipate heat and the heating panel to cool down.Utilizes pots and pans with lids during cooking to reduce the power used, which can also preserve the moisture of food as well as saving electricity.Clean the surface of the induction cooker frequently, to prevent dirt from accumulation, which will affect the function of the induction cooker and shorten its lifespan.

5 Major Taboos When Using Induction Cooker

If you want the induction cooker to have a longer lifespan, in addition to the above five maintenance precautions, there are five more taboos to pay attention to. The induction cooker is likely to be damaged if any one of the five taboos is committed.

Never use tin foil to cook on the induction cooker since the tin foil will melt and causing the induction cooker to melt as well.Do not place any food or utensils that are over 5kg on the induction cooker as it is the maximum loading capacity of the induction cooker.Do not put a hot lid on the induction cooker when cooking as the two will attract each other due to magnetization and may damage the induction cooker.When choosing pots and pans for the induction cooker, do not choose pots with uneven or rough bottoms. Scratching the cooker surface will make cleaning more difficult and affect the function of the induction cooker.In addition to selecting suitable pots and pans, do not frequently drag pots or gold-layered objects on the surface of the induction cooker when cooking. The glass surface will wear out and cause degradation.

The content and pictures of this article are provided and uploaded by the author. It does not represent the opinion of the company. If there are any copyright issues, please contact HKDecoman.

HKDecoman, now going global as Deco-Man, is a Hong Kong-based renovation platform which provides professional consultancy services and pioneers in the development of A.I. homeowner-engineer matching. We aim at educating the public about the art of home renovation and have our eyes on transforming the traditional renovation industry, bringing standardisation, transparency, convenience and automation to the business.

 

if(!gform){document.addEventListener(“gform_main_scripts_loaded”,function(){gform.scriptsLoaded=!0}),window.addEventListener(“DOMContentLoaded”,function(){gform.domLoaded=!0});var gform={domLoaded:!1,scriptsLoaded:!1,initializeOnLoaded:function(o){gform.domLoaded&&gform.scriptsLoaded?o():!gform.domLoaded&&gform.scriptsLoaded?window.addEventListener(“DOMContentLoaded”,o):document.addEventListener(“gform_main_scripts_loaded”,o)},hooks:{action:{},filter:{}},addAction:function(o,n,r,t){gform.addHook(“action”,o,n,r,t)},addFilter:function(o,n,r,t){gform.addHook(“filter”,o,n,r,t)},doAction:function(o){gform.doHook(“action”,o,arguments)},applyFilters:function(o){return gform.doHook(“filter”,o,arguments)},removeAction:function(o,n){gform.removeHook(“action”,o,n)},removeFilter:function(o,n,r){gform.removeHook(“filter”,o,n,r)},addHook:function(o,n,r,t,i){null==gform.hooks[o][n]&&(gform.hooks[o][n]=[]);var e=gform.hooks[o][n];null==i&&(i=n+”_”+e.length),null==t&&(t=10),gform.hooks[o][n].push({tag:i,callable:r,priority:t})},doHook:function(o,n,r){if(r=Array.prototype.slice.call(r,1),null!=gform.hooks[o][n]){var t,i=gform.hooks[o][n];i.sort(function(o,n){return o.priority-n.priority});for(var e=0;eComplete this form and we will recommend you a list of reputable interior design firms that fit your renovation requirements. It’s free! Note: This form is not applicable for repair works request.How many interior designers do you wish to get in touch with?3 – 55 – 8

My Property

My Property Type isHDBApartment/CondominiumPrivate HouseCommercialThe room type isPlease selectStudio2 Rooms3 Rooms4 Rooms5 RoomsAbove 5 RoomsProperty StatusNewResalePresently StayingKey Collection TimeYes, Key is collectedNo, in 1 – 3 months timeNo, in 3 – 6 months timeNo, in 7 – 12 months timeHave not purchase the unitProperty AddressUpload your Floor PlanAccepted file types: jpg, gif, png, pdf, ppt, jpeg, Max. file size: 2 MB.We recommend to attach your floor plan for a better estimate. File must less than 2MB.

Project Info

Area(s) you need to renovateLiving RoomDining RoomKitchenBedroomsBathroomsOthersWhole unitPreferred design styleNo PreferenceAsianClassicContemporaryEclecticIndustrialMediterraneanMidcenturyMinimalismModernRetroRusticScandinavianTraditionalTransitionalTropicalVictorianVintageMy project priority isPlease selectAesthetically Nice – I want good designCost effectiveness – I’m on a tight budgetMy renovation budget isPlease selectNot Fixed20,000 and Below20,001 – 30,00030,001 – 40,00040,001 – 60,00060,001 – 80,00080,001 – 100,000100,001 – 200,000200,001 & AboveDo you require renovation loan?Please selectYes, please call meNo. I don’tOther information?

My Contact Details

My name isFirstLastMy Email isYou can call me atHow Did You Get To Know Us?Please selectGoogleFacebookInstagramYahooEvents/RoadshowFriendsNewsletterRenoNation MagazineThe Straits TimesSME MagazineBingMSN Search

 

AgreementI acknowledge that the details provided in this form will be shared with Renonation.sg and the recommended interior design firms.AgreementI wish to receive home renovation inspiration, tips and guides from Renonation.sgPhoneThis field is for validation purposes and should be left unchanged.
gform.initializeOnLoaded( function() {gformInitSpinner( 5, ‘https://www.renonation.sg/wp-content/plugins/gravityforms/images/spinner.svg’ );jQuery(‘#gform_ajax_frame_5’).on(‘load’,function(){var contents = jQuery(this).contents().find(‘*’).html();var is_postback = contents.indexOf(‘GF_AJAX_POSTBACK’) >= 0;if(!is_postback){return;}var form_content = jQuery(this).contents().find(‘#gform_wrapper_5’);var is_confirmation = jQuery(this).contents().find(‘#gform_confirmation_wrapper_5’).length > 0;var is_redirect = contents.indexOf(‘gformRedirect(){‘) >= 0;var is_form = form_content.length > 0 && ! is_redirect && ! is_confirmation;var mt = parseInt(jQuery(‘html’).css(‘margin-top’), 10) + parseInt(jQuery(‘body’).css(‘margin-top’), 10) + 100;if(is_form){jQuery(‘#gform_wrapper_5’).html(form_content.html());if(form_content.hasClass(‘gform_validation_error’)){jQuery(‘#gform_wrapper_5’).addClass(‘gform_validation_error’);} else {jQuery(‘#gform_wrapper_5’).removeClass(‘gform_validation_error’);}setTimeout( function() { /* delay the scroll by 50 milliseconds to fix a bug in chrome */ jQuery(document).scrollTop(jQuery(‘#gform_wrapper_5’).offset().top – mt); }, 50 );if(window[‘gformInitDatepicker’]) {gformInitDatepicker();}if(window[‘gformInitPriceFields’]) {gformInitPriceFields();}var current_page = jQuery(‘#gform_source_page_number_5’).val();gformInitSpinner( 5, ‘https://www.renonation.sg/wp-content/plugins/gravityforms/images/spinner.svg’ );jQuery(document).trigger(‘gform_page_loaded’, [5, current_page]);window[‘gf_submitting_5’] = false;}else if(!is_redirect){var confirmation_content = jQuery(this).contents().find(‘.GF_AJAX_POSTBACK’).html();if(!confirmation_content){confirmation_content = contents;}setTimeout(function(){jQuery(‘#gform_wrapper_5’).replaceWith(confirmation_content);jQuery(document).scrollTop(jQuery(‘#gf_5’).offset().top – mt);jQuery(document).trigger(‘gform_confirmation_loaded’, [5]);window[‘gf_submitting_5’] = false;wp.a11y.speak(jQuery(‘#gform_confirmation_message_5’).text());}, 50);}else{jQuery(‘#gform_5’).append(contents);if(window[‘gformRedirect’]) {gformRedirect();}}jQuery(document).trigger(‘gform_post_render’, [5, current_page]);} );} );>

Did you miss our previous article…
https://www.amazingsidingstl.com/?p=538

7 Best Sheet Metal Shears [2021 Reviews]

Featured Image: Best Reviews

When it comes to making clean, straight cuts, electric metal shears are a must-have item in your toolkit. Because there are so many electric metal shears on the market nowadays, you may be confused about which one to purchase. Allow us to guide you on the proper path, beginning with our suggestions for the finest metal shears available.

Below are the top seven best sheet metal shears in the market today.

.fusion-fullwidth.fusion-builder-row-1 { overflow:visible; }1.>

DEWALT Metal Shear, Swivel Head, 18GA (DW890) , Yellow
DEWALT Metal Shear, Swivel Head, 18GA (DW890) , Yellow The metal shear has powerful, 5 amp, all ball bearing motor for long lifeThe electric metal shear head swivels 360 degree for cutting convenienceThe electric metal shear cuts 7/32-inch strip, which continuously curls out of cutting area for clear line of sightVariable speed dial allows user to vary speed for specific materials and various applications (100-350 spm)Cuts radius of 5-1/2-inch and largerCheck Price Below

Buy on Amazon>

2.>Sale

Milwaukee 6852-20 18-Gauge Shear
Milwaukee 6852-20 18-Gauge Shear Mpn: 6852-20Country of manufacture: ChinaManufacturer: Milwaukee6.8 amp Milwaukee motorHex WrenchCheck Price Below

Buy on Amazon>

3.>

WEN 3650 4.0-Amp Corded Variable Speed Swivel Head Electric Metal Cutter Shear
WEN 3650 4.0-Amp Corded Variable Speed Swivel Head Electric Metal Cutter Shear Pressure sensitive trigger cuts anywhere from 0 to 2500 strokes per minuteAttack up to 20 gauge stainless steel and 18 gauge sheet metalLightweight design limits fatigue during operationUtilizes a powerful 4-amp motor, curling the metal as it cutsSwiveling head rotates a full 360 degrees to meet the needs of any projectCheck Price Below

Buy on Amazon>

4.>Sale

Genesis GES40 4.0 Amp Corded Swivel Head Variable Speed Electric Power Metal Shear, original version
Genesis GES40 4.0 Amp Corded Swivel Head Variable Speed Electric Power Metal Shear, original version Quickly cuts metal roofing, flashing, and other sheet metal up to 14 gauge – Compare the Genesis metal shear to other drill attachment Shears that can only cut 20 gauge Sheet metal!Powerful 4.0 amp motor360° swiveling head for cutting control and convenience -cut circles and curves with the Genesis electric metal shearVariable speed (0-2500) SPM for versatility in cutting a variety of materials – cuts through sheet metal up to 14 gauge in thickness!Three blade cutting system reduces metal deformation – experience smooth cuts EVERYTIME!Check Price Below

Buy on Amazon>

5.>

Gino Development 01-0101 TruePower 18 Gauge Heavy Duty Electric Sheet Metal Shear Tin Snips Cutter Nibbler
Gino Development 01-0101 TruePower 18 Gauge Heavy Duty Electric Sheet Metal Shear Tin Snips Cutter Nibbler Country Of Origin: ChinaModel Number: 01-0101Item Package Dimension: 14.0″ L x 3.0″ W x 7.0″ HItem Package Weight: 6.0 lbCheck Price Below

Buy on Amazon>

6.>

Wild Edge Electric Metal Shear, 5.0 Amp Variable Speed Swivel Head 14 Gauge Electric Metal Shear
Wild Edge Electric Metal Shear, 5.0 Amp Variable Speed Swivel Head 14 Gauge Electric Metal Shear Variable speed: (0-2700) strokes per minute in cutting a variety of materialsCuts up to 15 gauge stainless steel and 14 gauge sheet metalPowerful 5. 0 amp motor360 Degree swiveling head for cutting control and convenienceTwo finger trigger and lock-on buttonCheck Price Below

Buy on Amazon>

7.>

Makita JS1602 16 Gauge Shear
Makita JS1602 16 Gauge Shear Powerful 3.3 AMP motor delivers 4,000 SPM for the most demanding applicationsSmaller circumference barrel grip (only 2-1/4”) for added comfortRefined design at only 3.4 lbs. for increased controlLock-on slide switch for continuous operationBuilt-in thickness gauge for added convenienceCheck Price Below

Buy on Amazon>

1. DEWALT DW890 Metal Shear

.fusion-content-boxes-1 .heading .content-box-heading {color:#cfcfcf;}
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-link-icon-hover .heading .content-box-heading,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-link-icon-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box-hover .heading .content-box-heading,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-1 .fusion-content-box-hover .fusion-read-more:hover:after,
.fusion-content-boxes-1 .fusion-content-box-hover .fusion-read-more:hover:before,
.fusion-content-boxes-1 .fusion-content-box-hover .fusion-read-more:hover,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-link-icon-hover .icon .circle-no,
.fusion-content-boxes-1 .heading .heading-link:hover .content-box-heading {
color: #65bc7b;
}
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box-hover .icon .circle-no {
color: #65bc7b !important;
}.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button {background: #293f63;color: #ffffff;}.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button .fusion-button-text {color: #ffffff;}
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon > span {
background-color: #65bc7b !important;
}
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box-hover .heading .icon > span {
border-color: #65bc7b !important;>

Pros:

AffordablePower lockWith a solid bearing based 5A motorVersatile speed

Cons:

Tough to work w/ when it comes to thick materials

Sebring Tip:

The DeWalt’s DW890 Metal Shears are a pair of double-sided electric shears. On the metal workpiece, they cut a thin 7/32-inch strip out of it. This strip curls as you cut, keeping it out of the way and allowing you to continue working without having to stop to remove the extra material every time you cut.

There are ball bearings in the 5-amp motor, which reduce friction and assist guarantee the motor’s long life and excellent quality. Also, the speed may be adjusted from 100 to 350 spm with the help of a handy dial. In addition to the 360° rotating head, the trigger may be kept in the on position to reduce user fatigue while cutting lengthy strips.

.fusion-content-boxes-1 .fusion-content-box-hover .heading-link:hover .icon i.circle-yes,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box:hover .heading-link .icon i.circle-yes,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon i.circle-yes,
.fusion-content-boxes-1 .fusion-content-box-hover .link-area-box-hover .heading .icon i.circle-yes {
background-color: #65bc7b !important;
border-color: #65bc7b !important;>

2. Milwaukee 6852-20 18-Gauge Shear

.fusion-content-boxes-2 .heading .content-box-heading {color:#cfcfcf;}
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-link-icon-hover .heading .content-box-heading,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-link-icon-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box-hover .heading .content-box-heading,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-2 .fusion-content-box-hover .fusion-read-more:hover:after,
.fusion-content-boxes-2 .fusion-content-box-hover .fusion-read-more:hover:before,
.fusion-content-boxes-2 .fusion-content-box-hover .fusion-read-more:hover,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-link-icon-hover .icon .circle-no,
.fusion-content-boxes-2 .heading .heading-link:hover .content-box-heading {
color: #65bc7b;
}
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box-hover .icon .circle-no {
color: #65bc7b !important;
}.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button {background: #293f63;color: #ffffff;}.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button .fusion-button-text {color: #ffffff;}
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon > span {
background-color: #65bc7b !important;
}
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box-hover .heading .icon > span {
border-color: #65bc7b !important;>

Pros:

Powerful 6.8A motorTrigger that can be adjusted for speedDesign that is easy to transport

Cons:

ExpensiveCan have a hard time with corrugated sheet

Sebring Tip:

Milwaukee’s 6852-20 18-Gauge Shear is a high-end model. It features a 6.8 Amp motor that can cut 1/18-inch sheet steel or 1/20-inch stainless steel. The waste curl has a cutting power of up to 2,500 spm and measures 13/64 inches.

The variable speed, like the WEN, is regulated by how hard the trigger is squeezed. The head swivels up to 360 degrees, which is a common feature in these gadgets but should be regarded as a must-have. The gadget is a little over four pounds, owing in part to a magnesium gearbox, and it features a rubber, tactile grip that helps to minimize user fatigue and offer a pleasant experience.

.fusion-content-boxes-2 .fusion-content-box-hover .heading-link:hover .icon i.circle-yes,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box:hover .heading-link .icon i.circle-yes,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon i.circle-yes,
.fusion-content-boxes-2 .fusion-content-box-hover .link-area-box-hover .heading .icon i.circle-yes {
background-color: #65bc7b !important;
border-color: #65bc7b !important;>

3. WEN 3650 Electric Metal Cutter Shear

.fusion-content-boxes-3 .heading .content-box-heading {color:#cfcfcf;}
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-link-icon-hover .heading .content-box-heading,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-link-icon-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box-hover .heading .content-box-heading,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-3 .fusion-content-box-hover .fusion-read-more:hover:after,
.fusion-content-boxes-3 .fusion-content-box-hover .fusion-read-more:hover:before,
.fusion-content-boxes-3 .fusion-content-box-hover .fusion-read-more:hover,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-link-icon-hover .icon .circle-no,
.fusion-content-boxes-3 .heading .heading-link:hover .content-box-heading {
color: #65bc7b;
}
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box-hover .icon .circle-no {
color: #65bc7b !important;
}.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button {background: #293f63;color: #ffffff;}.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button .fusion-button-text {color: #ffffff;}
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon > span {
background-color: #65bc7b !important;
}
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box-hover .heading .icon > span {
border-color: #65bc7b !important;>

Pros:

Low-costUp to 2,500 spm may be delivered via a pressure-sensitive triggerPower switch that can be locked on

Cons:

The motor is just 4 amps

Sebring Tip:

This model is a corded electric shear. It features a 4-amp motor that can go from 0 to 2,500 spm.

While other devices have a changeable dial, the WEN uses haptic pressure, which means that the harder you hold the trigger, the more power you receive, and the lighter you pull, the less power you get. Although it isn’t as precise as other methods, there is something to be said for the manual aspect of determining how much power you need. The WEN’s 4-amp motor isn’t quite as strong as the DeWalt’s, but it’s still one of the finest electrical metal shears for the money. It can cut stainless steel and sheet metal up to 20 gauge and 18 gauge. The twin blade design cuts 1.4-inch ribbon and weighs just 4.7 pounds, which means it is simple to hold and operate even over extended periods of time, reducing user fatigue.

.fusion-content-boxes-3 .fusion-content-box-hover .heading-link:hover .icon i.circle-yes,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box:hover .heading-link .icon i.circle-yes,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon i.circle-yes,
.fusion-content-boxes-3 .fusion-content-box-hover .link-area-box-hover .heading .icon i.circle-yes {
background-color: #65bc7b !important;
border-color: #65bc7b !important;>

4. Genesis GES40 Variable Speed Electric Power Metal Shear

.fusion-content-boxes-4 .heading .content-box-heading {color:#cfcfcf;}
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-link-icon-hover .heading .content-box-heading,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-link-icon-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box-hover .heading .content-box-heading,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-4 .fusion-content-box-hover .fusion-read-more:hover:after,
.fusion-content-boxes-4 .fusion-content-box-hover .fusion-read-more:hover:before,
.fusion-content-boxes-4 .fusion-content-box-hover .fusion-read-more:hover,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-link-icon-hover .icon .circle-no,
.fusion-content-boxes-4 .heading .heading-link:hover .content-box-heading {
color: #65bc7b;
}
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box-hover .icon .circle-no {
color: #65bc7b !important;
}.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button {background: #293f63;color: #ffffff;}.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button .fusion-button-text {color: #ffffff;}
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon > span {
background-color: #65bc7b !important;
}
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box-hover .heading .icon > span {
border-color: #65bc7b !important;>

Pros:

Budget-friendlyMetal deformation is reduced because of three-blade systemSwitch that locks on

Cons:

Obstacles in the use of corrugated sheetBetter at doing straight lines than corners

Sebring Tip:

With a 4-amp motor, the Genesis GES40 Variable Speed Electric Power Metal Shear can cut sheet metal up to 14 gauge. It features variable speed settings ranging from 0 to 2,500 rpm, which are controlled by the sensitive trigger.

The Genesis weighs 5.4 pounds, which is a bit more than some other units, but it’s still light and simple to use. It also includes a lock-on switch, allowing you to move the workpiece and hold the shear in a more comfortable position.

.fusion-content-boxes-4 .fusion-content-box-hover .heading-link:hover .icon i.circle-yes,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box:hover .heading-link .icon i.circle-yes,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon i.circle-yes,
.fusion-content-boxes-4 .fusion-content-box-hover .link-area-box-hover .heading .icon i.circle-yes {
background-color: #65bc7b !important;
border-color: #65bc7b !important;>

5. Gino Development 01-0101 TruePower Electric Sheet Metal Shear

.fusion-content-boxes-5 .heading .content-box-heading {color:#cfcfcf;}
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-link-icon-hover .heading .content-box-heading,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-link-icon-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-box-hover .heading .content-box-heading,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-box-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-5 .fusion-content-box-hover .fusion-read-more:hover:after,
.fusion-content-boxes-5 .fusion-content-box-hover .fusion-read-more:hover:before,
.fusion-content-boxes-5 .fusion-content-box-hover .fusion-read-more:hover,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-link-icon-hover .icon .circle-no,
.fusion-content-boxes-5 .heading .heading-link:hover .content-box-heading {
color: #65bc7b;
}
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-box-hover .icon .circle-no {
color: #65bc7b !important;
}.fusion-content-boxes-5 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button {background: #293f63;color: #ffffff;}.fusion-content-boxes-5 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button .fusion-button-text {color: #ffffff;}
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon > span {
background-color: #65bc7b !important;
}
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-box-hover .heading .icon > span {
border-color: #65bc7b !important;>

Pros:

No waste with a single bladeWill cut curves as well as plastic

Cons:

The power supply is just 3.5 ampsSingle-speedThe workpiece is distorted by a single blade

Sebring Tip:

The Gino Development 01-0101 TruePower Electric Sheet Metal Cutter has just one blade. This implies the Gino will cut through metal without producing waste, but the metal will bend and deform as the blade passes through it.

As a result, if you’re going to deal with the leftover metal and need it to stay flat, these shears aren’t the greatest option. A single blade shear is able to cut corners, but since it has a large turning circle, don’t anticipate sharp edges.

.fusion-content-boxes-5 .fusion-content-box-hover .heading-link:hover .icon i.circle-yes,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-box:hover .heading-link .icon i.circle-yes,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon i.circle-yes,
.fusion-content-boxes-5 .fusion-content-box-hover .link-area-box-hover .heading .icon i.circle-yes {
background-color: #65bc7b !important;
border-color: #65bc7b !important;>

6. Wild Edge SEMS5A Electric Metal Shear

.fusion-content-boxes-6 .heading .content-box-heading {color:#cfcfcf;}
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-link-icon-hover .heading .content-box-heading,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-link-icon-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-box-hover .heading .content-box-heading,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-box-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-6 .fusion-content-box-hover .fusion-read-more:hover:after,
.fusion-content-boxes-6 .fusion-content-box-hover .fusion-read-more:hover:before,
.fusion-content-boxes-6 .fusion-content-box-hover .fusion-read-more:hover,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-link-icon-hover .icon .circle-no,
.fusion-content-boxes-6 .heading .heading-link:hover .content-box-heading {
color: #65bc7b;
}
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-box-hover .icon .circle-no {
color: #65bc7b !important;
}.fusion-content-boxes-6 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button {background: #293f63;color: #ffffff;}.fusion-content-boxes-6 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button .fusion-button-text {color: #ffffff;}
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon > span {
background-color: #65bc7b !important;
}
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-box-hover .heading .icon > span {
border-color: #65bc7b !important;>

Pros:

5-amp motor at a low cost2,700 spm

Cons:

Straight lines are better

Sebring Tip:

You can get the Wild Edge SEMS5A Electric Metal Shear for about the same price as the Genesis. It features a more powerful 5-amp motor that can achieve a cutting speed of 2,700 spm, but this won’t make a significant difference while cutting. It can cut 15-gauge stainless steel and 14-gauge sheet metal, and it features a 360-degree swiveling head to enable for some movement & curve in your cut.

.fusion-content-boxes-6 .fusion-content-box-hover .heading-link:hover .icon i.circle-yes,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-box:hover .heading-link .icon i.circle-yes,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon i.circle-yes,
.fusion-content-boxes-6 .fusion-content-box-hover .link-area-box-hover .heading .icon i.circle-yes {
background-color: #65bc7b !important;
border-color: #65bc7b !important;>

7. Makita JS1602 16 Gauge Shear

.fusion-content-boxes-7 .heading .content-box-heading {color:#cfcfcf;}
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-link-icon-hover .heading .content-box-heading,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-link-icon-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-box-hover .heading .content-box-heading,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-box-hover .heading .heading-link .content-box-heading,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-link-icon-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-7 .fusion-content-box-hover .fusion-read-more:hover:after,
.fusion-content-boxes-7 .fusion-content-box-hover .fusion-read-more:hover:before,
.fusion-content-boxes-7 .fusion-content-box-hover .fusion-read-more:hover,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::after,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-box-hover.link-area-box .fusion-read-more::before,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-link-icon-hover .icon .circle-no,
.fusion-content-boxes-7 .heading .heading-link:hover .content-box-heading {
color: #65bc7b;
}
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-box-hover .icon .circle-no {
color: #65bc7b !important;
}.fusion-content-boxes-7 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button {background: #293f63;color: #ffffff;}.fusion-content-boxes-7 .fusion-content-box-hover .link-area-box.link-area-box-hover .fusion-content-box-button .fusion-button-text {color: #ffffff;}
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon > span {
background-color: #65bc7b !important;
}
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-box-hover .heading .icon > span {
border-color: #65bc7b !important;>

Pros:

Can cut shapes and curvesComfortable and lightweight

Cons:

The 4-amp motor isn’t as powerful as it should beNo variable speed

Sebring Tip:

The Makita JS1602 12 Gauge Shear is a single-blade model with a high price tag. It features a 3.4-amp motor with a single cutting speed of 4,000 spm and low power consumption. When you first turn it on, it would seem too strong, and even when fully functioning, it will feel too powerful.

The Makita, on the other hand, is light and pleasant to operate, so it cuts sheet and stainless steel up to 16 gauge with little user fatigue. Because this is a single-blade cutting model, there is no waste, but one-half of the cut material will be distorted and possibly unusable.

.fusion-content-boxes-7 .fusion-content-box-hover .heading-link:hover .icon i.circle-yes,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-box:hover .heading-link .icon i.circle-yes,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon i.circle-yes,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-box-hover .heading .icon i.circle-yes {
background-color: #65bc7b !important;
border-color: #65bc7b !important;>

The Best Metal Shears Buying Guide

You’re probably familiar with a metal shear if you deal with sheet metal or metal components in general. With this tool, you can swiftly cut through metal components without exerting too much effort. Working with sheet metal becomes very difficult, if not impossible, without this equipment.

If you want to be productive in the workshop, you need to choose the finest electric metal shear. However, if you aren’t well-versed in the subject, finding the appropriate product may be difficult. That’s where we can help.

As previously said, we have included some of the finest metal cutting shears in this post. You will differentiate them easily now that we’ve discussed their main features and choices. You should have a good understanding of metal shears in general after this.

However, if you want to learn more about metal shears, we’ve put up a comprehensive purchasing guide especially for you. This buying guide covers a wide variety of metal shears-related topics and considerations. In other words, if you read this buying guide all the way to the conclusion, you’ll be able to choose the ideal metal scissors for you:

Type of Tool

Metal shears come in various sizes and shapes since they are so helpful for cutting metal sheets and items. As a result, the different models available vary in terms of capability. Various metal shears are suitable for distinct purposes, in addition to having other characteristics.

Some are stand-alone power tools with built-in electric motors, while others are accessories for your current power tools. You may choose one of them based on your needs for simplicity of use and power.

Type of Power

If you choose freestanding power shears with an integrated electric motor, you may choose from various power types. Even though all powered metal shears are powered by electricity, the energy source varies depending on the model.

Some are corded versions that connect directly into a power outlet, while others are cordless and run on battery power. Corded versions are usually more powerful, while cordless ones are more convenient for portable use.

Power Rating

Whether you’re purchasing a corded or cordless power tool, it’s critical to be sure it’s strong enough. If you wish to cut thick metal sheets, this is particularly true for metal shears. As a result, the power rating for the majority of metal shears models may be found.

This power rating is expressed in amps for corded versions and is either four amps or five amps. Cordless metal shears, on the other hand, have a power rating of 12 or 20 volts. In each of these instances, the greater the rating, the better the performance.

Rating of the Gauge

Checking the gauge rating of your metal shears is another method to get a sense of their performance. This informs you what metal sheet thicknesses are supported or compatible with the metal shears you’re using. Some metal shears have a 14-gauge gauge rating, whereas others have a 20-gauge gauge rating.

When comparing the two gauge ratings, the 14-gauge grade is superior for cutting thick metal sheets. In other words, thinner metal sheets come from a higher gauge rating, whereas thinner metal sheets result from a lower gauge value.

Warranty

Any particular metal shears model’s guarantee length is just as essential as any other element or detail discussed in our purchasing guide. This is because if you want to use your metal shears for a long time, you should get metal shears with a lengthy guarantee period.

Almost every metal shear on the market comes with a two-year guarantee. However, in certain instances, you may get somewhat better versions with a 5-year warranty.

What To Look For When Buying the Best Metal Shears

Metal shears aren’t designed for a single task. Nonetheless, depending on the speed controls, their performance and function change. 

The blade material: Make sure you get a metal shear with a sturdy blade that can withstand the materials you’ll be cutting. This will save you money by keeping you from having to replace the blade frequently. Furthermore, a metal shear with a powerful blade will allow you to cut quickly and smoothly without becoming fatigued.

The metal shear’s speed controls are the next item you should think about. It is suggested that you use a high-speed shear to avoid any unnecessary slowdowns while operating. High-speed shears improve cutting and finishing by increasing stroke speed.

Safety: If the tool you’re using doesn’t have the appropriate safeguards and safety features, shearing may cause damage or injury. Look for warning labels or point-of-operation guards on the metal shear you’re going to buy to keep you safe when shearing. To increase your safety even further, it’s a good idea to get some instruction before using the machine, particularly if it’s your first time.

Conclusion:

During our testing, we discovered that the DeWalt DW890 Metal Shear is reasonably priced, powerful, and has all of the features you need from a tool of this kind. If you’re on a budget and require a set of shears with variable power settings and a high power output, the WEN 3650 Electric Metal Cutter Shear is a great choice.

The DeWalt metal shear would be ideal for basic shearing at home. It has a strong 5.0 Amp motor with a ball bearing for added longevity. This metal shear then cuts a 7/32 inch strip that bends out from the cutting region, giving you a clean line of sight. This product is very long-lasting and simple to use. It can cut a radius of up to 5-1/2 inches, and its head swivels 360 degrees for easy cutting.

Because this device is lightweight (weighing just 5.0 lbs), you may use it for longer periods with less hand fatigue. It can cut through 20-gauge stainless steel and 18-gauge mild steel, among other materials. Its variable speed dial allows you to adjust the speed for different applications and materials.

To view our Amazon Associates Disclaimer, please click here.

The post 7 Best Sheet Metal Shears [2021 Reviews] appeared first on Luxury Home Remodeling | Sebring Design Build.

Did you miss our previous article…
https://www.amazingsidingstl.com/?p=494