Located along Toh Guan Road, this Jurong East BTO launched in August 2021 is situated near an upcoming MRT station along the future Jurong-Region Line. We visited the site for Toh Guan Grove to check out its surroundings and to see what else this BTO has to offer.

t a glance

BTOToh Guan GroveLocationAlong Toh Guan RoadNo. of units569Unit types2-room Flexi, 3-, and 4-room flatsNo. of blocks3No. of floors10 to 37 storeysSite facilitiesRetail shops and a supermarketPublic transportationNearest MRTs: Toh Guan station on the Jurong Region Line (estimated completion by 2028 and ~5-min walk) and Jurong East Interchange (~14-min walk)
Buses: Bus stops are located on Toh Guan Road. Plenty of buses service this route taking you to areas like Bishan, Habourfront, Queenstown, Orchard, Bukit Timah and PioneerSurrounding amenitiesMalls: IMM, JEM, Westgate and Jcube (~11- to 17-min walk)
Hawker centre/Wet market: Yuhua Village Market and Food Centre (~14-min walk)
Other eateries: Coffee shops at blocks 267A, 282A and 286E Toh Guan Road, all surrounding the BTO
Parks: Located next to a PCN routeSchools within 1km (estimated)Fuhua Primary School, Yuhua Primary School, Bukit View Primary School, Jurong Primary School, Keming Primary School, LianHua Primary School and Princess Elizabeth Primary SchoolEstimated completion dateFirst quarter of 2026

The site

We headed down to the site during a weekend afternoon. Located away from the main roads, Toh Guan Grove sits in a relatively serene spot. However, because of the large number of public housing and coffee shops surrounding the site, we witnessed quite a high footfall.

Site for Toh Guan Grove BTO, taken from block 265.

Site for Toh Guan Grove BTO, taken from Toh Guan Road.

There are also quite a number of buses plying Toh Guan Road. This likely means that traffic will get quite busy along this road, especially during peak periods when the bus frequencies go up.

Toh Guan Road.

As mentioned before, we saw three coffee shops surrounding Toh Guan Grove alone so you will have plenty of options for dinner. One is located just opposite the site at block 286E, while the other is situated at 282A next to the roundabout adjacent to the site. The third is located at neighbouring block 267A.

Plenty of coffee shops surrounding the Toh Guan Grove BTO.

Within Toh Guan Grove, you will also see a supermarket and other retail shops. IMM is also less than a 15-min walk, so you will get access to other F&B and retail options as well as the Giant hypermarket. In terms of convenience, this BTO is pretty attractive.

This BTO will also see Toh Guan MRT station located just a 5-min walk away from it. The station will be on the future Jurong-Region Line (JRL) and is scheduled for completion in 2028 under the second phase of construction.

Toh Guan Grove BTO will be completed in 2026, so you will have about two years before you get to enjoy the new station. Once it’s up though, the station will be just one stop to Jurong East Interchange, which intersects with the North-South and East-West lines. For now, the Jurong East station is less than a 15-min walk away, but if you prefer not to walk, there are several buses along Toh Guan Road that take you to the station.

The area is also pretty convenient for drivers. Drivers will have to get through just a couple of traffic lights to hit major expressway PIE.

What unit should you go for at Toh Guan Grove?

Site Map for Toh Guan Grove BTO.

2-room flats

Unlikely to get afternoon sun: Stacks 275, 277, 321 and 323.

Best for privacy: Stacks 277 and 321.

Best for unblocked views: 279 and 281 (above 5th storey); 283; 317, 319, 321 and 323 (above 21st storey); 313, 315; 303 and 305 (above 5th storey).

Traffic noise: Avoid stacks 279, 281, 283, 285, 287 and 289 facing Toh Guan Road, which can get quite busy as this road leads to major expressways and also sees a high number of buses plying this route.

Noise from human activity: If you don’t want to be disturbed by a flurry of activity surrounding the retail shops and the supermarket on site, avoid stacks at Block 289A. On the plus side for the stacks in this block though is getting to those amenities really quickly. Stacks 313, 315, 317 and 319 are also facing the pavilion as well as the playground and fitness corners, which can get quite noisy because of the higher concentration of human activity.

Rubbish chutes: Avoid stack 287 and 289 located near the rubbish chutes and the bin centre.

3-room flats

Unlikely to get afternoon sun: Stacks 273, 297 and 325.

Best for unblocked views: The inward-looking stacks, 271, 273, 297 and 299. If you wish to go for stack 325, get a unit above the 21st floor since it’s looking towards block 284, which is 21 storeys high.

Away from human activity zones: Stack 325.

Near the lifts: Avoid stacks 271 and 297 if you don’t want your front door to be located near the lifts. Privacy is usually scant in these areas, since people waiting for the lifts tend to look into your units.

4-room flats

Unlikely to get afternoon sun: Stack 295.

Best for privacy: Stacks 293 and 309.

Best for unblocked views: 291 and 293 (above 5th storey); 301 (above 10th storey); 307 (above 21st storey); 309.

Noise from human activity: Avoid stacks 295 and 311 if you don’t want to be facing the pavilion, playgrounds and fitness corners. These areas have high concentration of human activity. Avoid stack 301 if you don’t want to be located near the bin centre or facing the service road behind the supermarket and shops where a lot of loading/unloading is going to take place.

Still have questions on BTO Toh Guan Grove? Let us know in the comments!

if(!gform){document.addEventListener(“gform_main_scripts_loaded”,function(){gform.scriptsLoaded=!0}),window.addEventListener(“DOMContentLoaded”,function(){gform.domLoaded=!0});var gform={domLoaded:!1,scriptsLoaded:!1,initializeOnLoaded:function(o){gform.domLoaded&&gform.scriptsLoaded?o():!gform.domLoaded&&gform.scriptsLoaded?window.addEventListener(“DOMContentLoaded”,o):document.addEventListener(“gform_main_scripts_loaded”,o)},hooks:{action:{},filter:{}},addAction:function(o,n,r,t){gform.addHook(“action”,o,n,r,t)},addFilter:function(o,n,r,t){gform.addHook(“filter”,o,n,r,t)},doAction:function(o){gform.doHook(“action”,o,arguments)},applyFilters:function(o){return gform.doHook(“filter”,o,arguments)},removeAction:function(o,n){gform.removeHook(“action”,o,n)},removeFilter:function(o,n,r){gform.removeHook(“filter”,o,n,r)},addHook:function(o,n,r,t,i){null==gform.hooks[o][n]&&(gform.hooks[o][n]=[]);var e=gform.hooks[o][n];null==i&&(i=n+”_”+e.length),null==t&&(t=10),gform.hooks[o][n].push({tag:i,callable:r,priority:t})},doHook:function(o,n,r){if(r=Array.prototype.slice.call(r,1),null!=gform.hooks[o][n]){var t,i=gform.hooks[o][n];i.sort(function(o,n){return o.priority-n.priority});for(var e=0;eComplete this form and we will recommend you a list of reputable interior design firms that fit your renovation requirements. It’s free! Note: This form is not applicable for repair works request.How many interior designers do you wish to get in touch with?3 – 55 – 8

My Property

My Property Type isHDBApartment/CondominiumPrivate HouseCommercialThe room type isPlease selectStudio2 Rooms3 Rooms4 Rooms5 RoomsAbove 5 RoomsProperty StatusNewResalePresently StayingKey Collection TimeYes, Key is collectedNo, in 1 – 3 months timeNo, in 3 – 6 months timeNo, in 7 – 12 months timeHave not purchase the unitProperty AddressUpload your Floor PlanAccepted file types: jpg, gif, png, pdf, ppt, jpeg, Max. file size: 2 MB.We recommend to attach your floor plan for a better estimate. File must less than 2MB.

Project Info

Area(s) you need to renovateLiving RoomDining RoomKitchenBedroomsBathroomsOthersWhole unitPreferred design styleNo PreferenceAsianClassicContemporaryEclecticIndustrialMediterraneanMidcenturyMinimalismModernRetroRusticScandinavianTraditionalTransitionalTropicalVictorianVintageMy project priority isPlease selectAesthetically Nice – I want good designCost effectiveness – I’m on a tight budgetMy renovation budget isPlease selectNot Fixed20,000 and Below20,001 – 30,00030,001 – 40,00040,001 – 60,00060,001 – 80,00080,001 – 100,000100,001 – 200,000200,001 & AboveDo you require renovation loan?Please selectYes, please call meNo. I don’tOther information?

My Contact Details

My name isFirstLastMy Email isYou can call me atHow Did You Get To Know Us?Please selectGoogleFacebookInstagramYahooEvents/RoadshowFriendsNewsletterRenoNation MagazineThe Straits TimesSME MagazineBingMSN Search

AgreementI acknowledge that the details provided in this form will be shared with Renonation.sg and the recommended interior design firms.AgreementI wish to receive home renovation inspiration, tips and guides from Renonation.sgNameThis field is for validation purposes and should be left unchanged.
gform.initializeOnLoaded( function() {gformInitSpinner( 5, ‘https://www.renonation.sg/wp-content/plugins/gravityforms/images/spinner.svg’ );jQuery(‘#gform_ajax_frame_5’).on(‘load’,function(){var contents = jQuery(this).contents().find(‘*’).html();var is_postback = contents.indexOf(‘GF_AJAX_POSTBACK’) >= 0;if(!is_postback){return;}var form_content = jQuery(this).contents().find(‘#gform_wrapper_5’);var is_confirmation = jQuery(this).contents().find(‘#gform_confirmation_wrapper_5’).length > 0;var is_redirect = contents.indexOf(‘gformRedirect(){‘) >= 0;var is_form = form_content.length > 0 && ! is_redirect && ! is_confirmation;var mt = parseInt(jQuery(‘html’).css(‘margin-top’), 10) + parseInt(jQuery(‘body’).css(‘margin-top’), 10) + 100;if(is_form){jQuery(‘#gform_wrapper_5’).html(form_content.html());if(form_content.hasClass(‘gform_validation_error’)){jQuery(‘#gform_wrapper_5’).addClass(‘gform_validation_error’);} else {jQuery(‘#gform_wrapper_5’).removeClass(‘gform_validation_error’);}setTimeout( function() { /* delay the scroll by 50 milliseconds to fix a bug in chrome */ jQuery(document).scrollTop(jQuery(‘#gform_wrapper_5’).offset().top – mt); }, 50 );if(window[‘gformInitDatepicker’]) {gformInitDatepicker();}if(window[‘gformInitPriceFields’]) {gformInitPriceFields();}var current_page = jQuery(‘#gform_source_page_number_5’).val();gformInitSpinner( 5, ‘https://www.renonation.sg/wp-content/plugins/gravityforms/images/spinner.svg’ );jQuery(document).trigger(‘gform_page_loaded’, [5, current_page]);window[‘gf_submitting_5’] = false;}else if(!is_redirect){var confirmation_content = jQuery(this).contents().find(‘.GF_AJAX_POSTBACK’).html();if(!confirmation_content){confirmation_content = contents;}setTimeout(function(){jQuery(‘#gform_wrapper_5’).replaceWith(confirmation_content);jQuery(document).scrollTop(jQuery(‘#gf_5’).offset().top – mt);jQuery(document).trigger(‘gform_confirmation_loaded’, [5]);window[‘gf_submitting_5’] = false;wp.a11y.speak(jQuery(‘#gform_confirmation_message_5’).text());}, 50);}else{jQuery(‘#gform_5’).append(contents);if(window[‘gformRedirect’]) {gformRedirect();}}jQuery(document).trigger(‘gform_post_render’, [5, current_page]);} );} );>

Mary Wells

www.amazingsidingstl.com

Aug 2021 BTO Analysis: Towner Residences at Kallang Whampoa

August 16, 2021

Mary Wells

Home Design No Comments

With just 316 units, Towner Residences at Kallang/Whampoa is the smallest BTO development launched in Aug 2021. Sandwiched between two schools and an expressway, this BTO may not be all that conducive at first glance. But on closer inspection, it does have a few redeeming qualities. We take a look at the site and see what stacks to look out for if you decide to go for a unit there.

t a glance

BTOTowner ResidencesLocationAlong Towner RoadNo. of units316Unit types3- and 4-room flatsNo. of blocks1 + 1 (block of rental flats)No. of floors32 to 40 storeysPublic transportationNearest MRT: Boon Keng (~8-min walk)

Bus stop along Towner RoadSurrounding amenities within walking distanceHawker Centre: Whampoa Makan Place (~8-min walk)
Supermarkets: Sheng Siong at 108 McNair Road (~4-min walk), NTUC Fairprice at 80 Lor Limau (~8-min walk) and a future supermarket at Towner Crest BTO.Schools within 2km (estimated)Bendemeer Primary School, Hong Wen School, Farrer Park Primary School, Pei Chun Public School, St Andrew’s Junior, St Joseph’s Institution JuniorEstimated completion date4th quarter of 2026

The site

Site for Towner Residences. Surrounded by a couple of older flats and low-rise private housing as well as two schools.

We visited the site on a weekday afternoon and found the area to be a hive of activity. School had just finished, and there were numerous pick-ups happening along Towner Road. Traffic also tends to be pretty congested during drop-off and pick-up hours, so make sure you account for this if you are getting a flat here.

Pick-ups and drop-offs happening at Hong Wen School (left of image). Towner Residences is to the right of image.

Along Towner Road.

Just opposite, traffic from the Central Expressway (CTE) was roaring loudly. Towner Residences is definitely not one for those who like their peace and quiet.

In terms of convenience, the nearest MRT station, Boon Keng, is just a 7-min walk away. It’s not the shortest distance, when you compare with the other BTOs in the same area that were launched earlier like Towner Crest, but it’s still walkable.

What’s significant about this is that Boon Keng MRT station is just two stops to Little India interchange, which gets you to the Downtown Line, and three stops to Dhoby Ghaut Interchange, which gets you to two other MRT lines. Looking at connectivity, this is pretty decent.

Foodies, you will be able to walk to the popular Whampoa Makan Place, which has a wide array of (famous) hawker fare and a wet market. It’s just past an overhead bridge across the CTE. Nearer to home, there’s a small coffee shop located at block 122 down the road and a future eating house at BTO Towner Crest (BTO’s estimated completion in 3rd quarter of 2023). Otherwise, there are a few eateries, fast-food places and a hawker centre located next to Boon Keng MRT.

For supermarkets, there’s a Sheng Siong nearby, an NTUC Fairprice located close to Whampoa Makan Place as well as a future supermarket at Towner Crest.

No major malls within walking distance. But City Square Mall is just one MRT stop away at Farrer Park MRT station.

Which unit should you go for at Towner Residences?

3-room flats

You get to choose from stacks 231, 233 and 235 for 3-room flats.

Stack 231 is located right next to the pavilion and the car park. You are likely going to face issues with noise, car fumes and the revving of engines if you are situated on a lower floor. However this is also the best stack for privacy, since it’s a corner unit.

Stacks 233 and 235 are facing Hong Wen School, so you are definitely going to experience the noise from being located near a school. This isn’t a major issue if you aren’t at home for most part of the day, but if you work from home, consider if this is something you can tolerate.

There is one advantage of a school-facing stack however. The school buildings are estimated to be about five to six storeys high. Get a unit on the higher floor to get unblocked views if you are at stacks 233 and 235.

Stack 235 is the best choice for no afternoon sun, while stack 231 will experience the full brunt of it. Stack 233 will also receive some afternoon sun coming in from the northwest direction from March to September.

4-room flats

Stacks 219, 221, 223, 225, 227 and 229 are available for those who are looking for a 4-room unit. There are two different layouts available for 4-room flats.

Stacks 221 and 223 features a boxier layout, with the communal areas located in the middle of flat and one of the common bedrooms located on the opposite end.

The other stacks feature a more conventional BTO layout, with all the bedrooms to one side.

There are pros and cons for each. Here’s a summary:

Boxy LayoutConventional LayoutPros*More windows in the master bedroom

*Ample foyer area for shoe storage

*More privacy for one of the common bedrooms

*Possibility of hacking away the common bedroom next to the master bedroom to create an extended bedroom with a walk-in closet

*More spacious common bathroom*Eat-in kitchen design: Dining area located near the kitchen

*Open-concept kitchen

*More empty walls to do up more kitchen storageCons*Entrance to common bathroom located near kitchen

*Not possible to have wet and dry kitchen design

*Common bathroom entrance far from the two common bedrooms

*Household shelter entrance in kitchen means one less wall you can use*Smaller common bedrooms

*Conventional layout, not as unique

*Lack of foyer space

*Fewer windows

*Wasted walkway space to the bedrooms

If you prefer having a more open-ended kitchen with more room to be creative, go for the conventional layout. Otherwise, the boxy layout is more refreshing as far as BTOs go and feature bigger bedrooms and less wasted space.

No afternoon sun: 229 is a north-south facing stack and is the best stack if you don’t want to experience any afternoon sun. East-facing stacks 219 and 221 will also not get any afternoon sun, but they will experience the morning sun.

Privacy: Go with corner stack 223 for privacy. Avoid stacks 225 and 227 if you can, since they are close to the lifts as well as facing the rubbish chutes directly.

Unblocked views: For stacks 223, 225, 227 and 229, get a unit on a higher floor (above the 25th storey) for unblocked views. For stacks facing the school, 219 and 221, get a unit that is above the 5th or 6th storey for unblocked views.

Noise: There isn’t exactly a conducive and quiet 4-room stack. Stacks 219 and 221 are facing the school, stacks 223, 225 and 227 are facing the playgrounds and fitness corners and stack 229 is located near the car park. If we have to choose, stack 223 is located just a bit further from the activity zones, so you might experience less noise at this stack.

Park views: The master bedroom and one of the common bedrooms at stacks 221 and 223 will look into the nearby park (currently under construction), putting those extra windows to good use.

Park, to the left of image, is still under construction.

Still got a question on Towner Residences? Let us know in the comments below or hit us up on our social media platforms!

My Property

Project Info

My Contact Details

AgreementI acknowledge that the details provided in this form will be shared with Renonation.sg and the recommended interior design firms.AgreementI wish to receive home renovation inspiration, tips and guides from Renonation.sgEmailThis field is for validation purposes and should be left unchanged.
gform.initializeOnLoaded( function() {gformInitSpinner( 5, ‘https://www.renonation.sg/wp-content/plugins/gravityforms/images/spinner.svg’ );jQuery(‘#gform_ajax_frame_5’).on(‘load’,function(){var contents = jQuery(this).contents().find(‘*’).html();var is_postback = contents.indexOf(‘GF_AJAX_POSTBACK’) >= 0;if(!is_postback){return;}var form_content = jQuery(this).contents().find(‘#gform_wrapper_5’);var is_confirmation = jQuery(this).contents().find(‘#gform_confirmation_wrapper_5’).length > 0;var is_redirect = contents.indexOf(‘gformRedirect(){‘) >= 0;var is_form = form_content.length > 0 && ! is_redirect && ! is_confirmation;var mt = parseInt(jQuery(‘html’).css(‘margin-top’), 10) + parseInt(jQuery(‘body’).css(‘margin-top’), 10) + 100;if(is_form){jQuery(‘#gform_wrapper_5’).html(form_content.html());if(form_content.hasClass(‘gform_validation_error’)){jQuery(‘#gform_wrapper_5’).addClass(‘gform_validation_error’);} else {jQuery(‘#gform_wrapper_5’).removeClass(‘gform_validation_error’);}setTimeout( function() { /* delay the scroll by 50 milliseconds to fix a bug in chrome */ jQuery(document).scrollTop(jQuery(‘#gform_wrapper_5’).offset().top – mt); }, 50 );if(window[‘gformInitDatepicker’]) {gformInitDatepicker();}if(window[‘gformInitPriceFields’]) {gformInitPriceFields();}var current_page = jQuery(‘#gform_source_page_number_5’).val();gformInitSpinner( 5, ‘https://www.renonation.sg/wp-content/plugins/gravityforms/images/spinner.svg’ );jQuery(document).trigger(‘gform_page_loaded’, [5, current_page]);window[‘gf_submitting_5’] = false;}else if(!is_redirect){var confirmation_content = jQuery(this).contents().find(‘.GF_AJAX_POSTBACK’).html();if(!confirmation_content){confirmation_content = contents;}setTimeout(function(){jQuery(‘#gform_wrapper_5’).replaceWith(confirmation_content);jQuery(document).scrollTop(jQuery(‘#gf_5’).offset().top – mt);jQuery(document).trigger(‘gform_confirmation_loaded’, [5]);window[‘gf_submitting_5’] = false;wp.a11y.speak(jQuery(‘#gform_confirmation_message_5’).text());}, 50);}else{jQuery(‘#gform_5’).append(contents);if(window[‘gformRedirect’]) {gformRedirect();}}jQuery(document).trigger(‘gform_post_render’, [5, current_page]);} );} );>

Mary Wells

www.amazingsidingstl.com

1950s wallpaper — 52 new designs from Bradbury & Bradbury

August 13, 2021

Mary Wells

Home Renovation No Comments

If you want to embrace a 1950s look in your mid century home, adding a splash (or more) of 1950s wallpaper is an important tool in your tool box. I’m always entranced with historic designs, so it’s exciting indeed to see Bradbury & Bradbury come out with this new collection of 1950s wallpapers. These are…

The post 1950s wallpaper — 52 new designs from Bradbury & Bradbury appeared first on Retro Renovation.

Did you miss our previous article…
https://www.amazingsidingstl.com/?p=464

Mary Wells

www.amazingsidingstl.com

The Detailed CWP Cabinetry Guide

August 13, 2021

Mary Wells

Home Renovation No Comments

Don Lake, the company’s founder, started it all in 1981 with the simple goal of providing excellent jobs to excellent people. Kevin and Caroline Gray, the current proprietors, maintain this concept by recruiting and training artisans enthusiastic about producing high-quality goods. To ensure that their customers have the best possible experience, CWP cabinetry dealers need hardworking and bright individuals to work in the store, central office, and showrooms.

Custom Wood Products is based in the Midwest and is established on a foundation of hard work, trust, and workers that take pleasure in producing the finest products available. At their 100,000-square-foot plant in St. Marys, Kansas, they are consistently implementing new technologies to improve their measurement and cutting processes for maximum accuracy. No one can do it better than their artisans when it comes to construction and assembly.

Define Your Style

With fully bespoke cabinets, you have complete design flexibility. Unique features, finishes, forms, and designs are available, in addition to custom sizes. Each client’s work is custom-made, making each order unique. Custom Wood Products combines the skills and workmanship of a traditional carpenter with the trustworthiness of a business that has shown it will stand behind its product for many years.

Make Your Dream A Reality

All approved Custom Wood Products designers have been chosen because they individually represent CWP’s ideals and have received specific training in kitchen and bath design, guaranteeing that customers enjoy the finest possible experience.

Lifetime Quality

For as long as you have your cabinetry, CWP backs it up with a lifetime guarantee. We can keep this guarantee because we take pleasure in utilizing high-quality components and constructing a high-quality product. We want our goods to last a lifetime, so you can be certain that if an issue arises, we will be there to help.

The CWP Process

Their professionally qualified designers will:

Work with you one-on-one to plan every aspect of your area.For a perfect fit, measure your area.They are accessible for consultation at any time throughout the process, from design to installation.

How To Choose The Best Cabinets From CWP Cabinetry

Your CWP cabinetry pro kitchen is essential. They are not only crucial in the overall dynamic of the space, but they are also vital to its function. Your cabinets keep your countertops and workstations tidy by offering enough storage space for your fantastic wine glass collection or even your extensive collection of cheese graters.

Choosing new cabinets may be difficult since selecting a design that won’t go out of style soon. CWP cabinetry pricing is one of the most significant expenditures you’ll make in your kitchen renovation, so you’ll want to be sure you’ll be pleased with them for many years to come.

Here is a quick rundown of all the things you should think about when you start looking for new kitchen cabinets:

Number Of Cabinets

The quantity of cabinets you choose is critical since it has a significant effect on the appearance and feel of your kitchen. Minimalist cabinets and open shelves have been popular in recent years. It’s essential to note that this is a fad and that minimalist cabinets and storage units may not be the best practical decision for your kitchen unless you have a stack of five Anthropologie plates and nothing else.

Similarly, cramming your kitchen with too many cupboards may make it seem cramped and crowded. Only having floor-to-ceiling cabinets on every side of the room is worse than not having any place to keep your kitchen items.

Material Selection

When there are so many designs to select from, how can you choose the appropriate materials for your kitchen? The first decision is whether you want to go with a traditional wood style or one of the more contemporary styles. Glass may be incorporated into your cabinets, or you can choose cabinets made of colored laminate.

You may also choose a style created from environmentally friendly materials. Cabinets constructed from recycled wood, salvaged wood, wood veneer, or even renewable wood like bamboo are examples of eco-friendly materials.

Shaker vs. Flat Panel vs. Inset

The design of your cabinet doors may or may not add to the function of your kitchen, but it will alter the dynamic of your space. Most individuals install three kinds of cabinets; however, if you want to stand out from the crowd, you also have additional choices.

The inset cabinet style is a timeless design that will stay fashionable and attractive for decades. It is, however, typically the most costly type to install. Because the cabinets have visible hinges, they must be properly sized and cut to be functional. Although they are pricey, their worth is evident when you are still receiving compliments on them after 20 years.

Shaker-style cabinet doors are a tried and proven design that fits into nearly any house if you want to opt for a traditional appearance. These cabinet doors are the most popular in today’s kitchens. The design’s clean lines and simplicity make it a great addition to virtually any kitchen since it goes with everything. Shaker cabinets may be used to create virtually any design, whether you want to go contemporary or go back to a farmhouse-style kitchen.

In contemporary ultra-modern kitchens, flat-panel cabinets have become the go-to cabinet design. They have a clean, modern appearance that is ideal for a futuristic or contemporary aesthetic. The flat panel design is available in both wood and laminate. This design is especially attractive since, depending on your budget, you can transform it from an IKEA showroom appearance to an ultra-high-end one. CWP Euro full access cabinetry is also perfect!

Hardware Selection

As if picking the correct quantity, material, and style of cabinets weren’t difficult enough; you also had to choose the right hardware to go with them. These accent elements, believe it or not, make a significant contribution to the overall design of your cabinets.

Choosing hardware with design elements that are similar to your cabinets is a solid rule of thumb. For example, if you’ve selected flat-panel cabinets for a contemporary kitchen, you’ll want to choose complementary hardware that matches your cabinets’ minimalist and clean appearance.

When you sum everything up, there are many factors to consider when designing your new kitchen cabinets. However, being the most costly component of your project and the main point of your kitchen, your cabinets demand your time and attention. If your designers are color-blind, seek the assistance of a reputable cabinet builder or kitchen specialist, who makes it their job to determine which drawer pulls match best with which cabinet color.

Making The Most Of CWP Cabinetry: Other Factors To Consider

Cabinets are essential components in kitchen design since they are typically one of the main focus points of the room. There are many different designs of kitchen cabinets on the market that it may be difficult to choose the right one for your home. Any homeowner would like to make the best decision for their kitchen and avoid purchasing kitchen cabinets that do not complement the area or are insufficiently practical. If you’re not sure what kind of kitchen cabinets you want for your area, it’s simple to make a mistake. How can you choose the perfect kitchen cabinets to improve the looks of your kitchen, offer the practical features you want, and inspire you to embark on a kitchen remodeling project? Take a look at these four helpful hints for selecting the best kitchen cabinets for your house.

Keep The Kitchen Style In Mind

Traditional, contemporary, and transitional are popular kitchen styles, but within those categories, there are many distinct subtypes. You should choose complementary cabinets that suit the design of your kitchen. The color palette of your kitchen should be reflected in the cabinets you choose. Consider how the cabinet doors will go in with the rest of your kitchen’s decor. The layout of your kitchen and the amount of space available are other variables to consider. Kitchens with limited space benefit from space-saving cabinetry. Euro cabinetry by CWP custom wood products can be customized based on your preferences.

Choose The Best Material

While you want all of your kitchen design components to flow together, your personal requirements should be your guide when selecting the right cabinet material. Kitchen cabinets come in a variety of materials, with wood and wood-like materials being the most common. You may select from hardwood, fiberboard, plywood, stainless steel, metal, melamine, or thermofoil, among other options. Hardwood is generally the finest choice if you want a high-quality cabinet material. The substance used in particleboard is usually of inferior grade.

Cabinet Design Shouldn’t Be Overlooked

When purchasing new cabinets, the doors get a lot of attention. They come in a wide variety of finishes, designs, and colors. Before choosing a cabinet design, consider the overall aesthetic of your kitchen and perhaps your whole home. Unless you want to create something unique and eccentric, the general style of your kitchen area and the cabinets should complement each other. Because of its classic, basic, and practical qualities, Shaker design kitchen cabinets are a popular option. They are also quite adaptable and may be used in both classic and contemporary kitchens.

im For Aesthetics And Functionality

You want your kitchen cabinets to appear nice while still providing the functionality you need. As a result, beauty and practicality are important considerations when choosing cabinets. Whether your kitchen is big or little, the finest cabinets will improve the appearance and feel of your room while also providing practical value. Design/style, color, finish, and even hardware are all aspects of aesthetics. You may pick between conventional cabinets with handles and sleek handleless cabinets. Think storage and organizing when it comes to functionality. All of your belongings should fit neatly into your cabinets in a manner that is both clutter-free and appealing to you.

If you approach it correctly, selecting the perfect kitchen cabinets may be a snap. Consider the design of your kitchen, the cabinet material, the desired cabinet style, as well as the aesthetics and usefulness. Consult our experts right away if you’re uncertain how to continue! You can also check CWP cabinetry reviews for your peace of mind.

.fusion-fullwidth.fusion-builder-row-2 { overflow:visible; }

The post The Detailed CWP Cabinetry Guide appeared first on Luxury Home Remodeling | Sebring Design Build.

Did you miss our previous article…
https://www.amazingsidingstl.com/?p=459

Mary Wells

www.amazingsidingstl.com

Aug 2021 BTO Analysis: Queen’s Arc

August 13, 2021

Mary Wells

Home Renovation No Comments

One of the seven BTOs launched for Aug 2021, Queen’s Arc at Queenstown may not be located next to an MRT station, but it is surrounded by a slew of F&B options and is within a short walking distance to IKEA Alexandra. If you are making a flat selection in this development, we consider what your best options are.

t a glance

BTOQueen’s ArcLocationAlong Queensway. Bounded by Queen’s Crescent (future road) and Queensway Drive (future road)No. of units610Unit types3- and 4-room flatsNo. of blocks2 + 1 (block of rental flats)No. of floors23 to 39 storeysSite facilitiesA community hub comprising a childcare centre, an eating house, a minimart, and other shops.Public transportationNearest MRT: Queenstown MRT station (~13 min walk)
Buses: Bus stops along Queensway with plenty of buses that take you to areas like Clementi, Jurong East, City Hall, Bugis, Woodlands, Clarke Quay, Serangoon, Marina Bay and Bedok.Surrounding amenitiesRetail, F&B: Queensway Shopping Centre (~4 min walk)

Anchorpoint Shopping Centre (~6 min walk)

IKEA Alexandra (~6 min walk)

Alexandra Central (~6 min walk)
Hawker Centres: Alexandra Village Food Centre (~5 min walk)

ABC Brickworks Market & Food Centre (~7 min walk)
Parks: Proximity to Rail Corridor and HortParkSchools within 2km (estimated)Queenstown Primary School, Blangah Rise Primary School, Gan Eng Seng Primary School, New Town Primary SchoolEstimated completion date3rd quarter of 2027

The site

Queen’s Arc Site

The surrounds of the BTO site were bustling during our site visit. Traffic was heavy along Queensway in the afternoon and will likely become busier with the expansion of Alexandra Hospital on the adjacent site beside Queen’s Arc. The redevelopment for the hospital is scheduled for completion in 2030.

Alexandra Hospital’s expansion. The site will sit adjacent to Queen’s Arc BTO.

Image: The Straits Times

While the BTO isn’t located next to an MRT station—Queenstown MRT on the East-West line is situated more than a 10-min walk away—there are a lot of buses (around 11!) that service the bus stops along Queensway in front of the BTO. These can take you to the CBD and most major neighbourhoods in Singapore.

There are no big shopping malls nearby, but you do get IKEA Alexandra within a short walking distance away. In terms of food options, you have the option of hawker fare at popular hawker centres Alexandra Village and ABC Brickworks as well as fast food eateries and restaurants located at Alexandra Central and Anchorpoint Shopping Centre. The Queen’s Arc site itself will also see a coffee shop.

For supermarkets, the nearest ones are at NTUC Fairprice along Stirling Road and the Cold Storage within Anchorpoint Shopping Centre. Within the BTO site, there will be a minimart as well.

Which unit should you pick for Queen’s Arc?

3-room flats

Most of the stacks here are 4-room units. If you are thinking of getting a 3-room flat, you only have stacks 129 and 131 to choose from. There isn’t a huge difference in these two stacks.

Both stacks are likely to get some afternoon sun, coming in from the northwest direction from March to September. The consolation is that because they are north-south facing, you are likely to experience some decent breeze.

The 3-room stacks are also facing the drop-off point, so you will want to avoid units on the lower floors if you don’t want to be disturbed by drop-off activities e.g. loading and unloading of goods, passenger pick-ups, etc.

The stacks are located relatively near the lifts. Consider investing in privacy screens near your front entrance to maintain more privacy in your apartment.

4-room flats

Afternoon sun: For 4-room stacks, stacks 105, 107, 133 and 135 are the ones to consider if you want to get less of the afternoon sun. Both these stacks will get some afternoon sun coming from the southwest direction from September to March, but the heat will be slightly alleviated as they are partially blocked by the stack before them.

Sun direction in April

Sun direction in October

Privacy: If you don’t want neighbours looking in through your front door when they walk by, look to stacks 107, 113, 127 and 133. However, depending on the design of the BTO, they might be able to see through your service yard as they walk along the common corridors. Check HDB’s 3D model for Queen’s Arc for more information.

Traffic noise: Traffic noise is likely going to a problem for stacks 101, 103, 117 and 119, which are facing a road junction and arterial road Queensway.

Queensway is a busy arterial road

Car park: Don’t want to be subjected to fumes and the revving of engines? Avoid stacks near the car park if you are picking a unit on the lower floors (the car park has 6 storeys). Stacks 135 and 137 have their service yards looking into the car park, while stacks 105, 107, 109 and 111 have the main areas of the home looking into the car park.

Human activity zones: Because of the higher concentration of human activity in zones like the pavilions, playgrounds and fitness corners, you are likely going to get some noise disturbance if your stack is facing them. These are the stacks most likely affected: 109, 111, 121, 123, 133, 135, 137 and 139.

If you have any other questions on BTO Queen’s Arc, hit us up on our socials or in the comments below!

My Property

Project Info

My Contact Details

AgreementI acknowledge that the details provided in this form will be shared with Renonation.sg and the recommended interior design firms.AgreementI wish to receive home renovation inspiration, tips and guides from Renonation.sgEmailThis field is for validation purposes and should be left unchanged.
gform.initializeOnLoaded( function() {gformInitSpinner( 5, ‘https://www.renonation.sg/wp-content/plugins/gravityforms/images/spinner.svg’ );jQuery(‘#gform_ajax_frame_5’).on(‘load’,function(){var contents = jQuery(this).contents().find(‘*’).html();var is_postback = contents.indexOf(‘GF_AJAX_POSTBACK’) >= 0;if(!is_postback){return;}var form_content = jQuery(this).contents().find(‘#gform_wrapper_5’);var is_confirmation = jQuery(this).contents().find(‘#gform_confirmation_wrapper_5’).length > 0;var is_redirect = contents.indexOf(‘gformRedirect(){‘) >= 0;var is_form = form_content.length > 0 && ! is_redirect && ! is_confirmation;var mt = parseInt(jQuery(‘html’).css(‘margin-top’), 10) + parseInt(jQuery(‘body’).css(‘margin-top’), 10) + 100;if(is_form){jQuery(‘#gform_wrapper_5’).html(form_content.html());if(form_content.hasClass(‘gform_validation_error’)){jQuery(‘#gform_wrapper_5’).addClass(‘gform_validation_error’);} else {jQuery(‘#gform_wrapper_5’).removeClass(‘gform_validation_error’);}setTimeout( function() { /* delay the scroll by 50 milliseconds to fix a bug in chrome */ jQuery(document).scrollTop(jQuery(‘#gform_wrapper_5’).offset().top – mt); }, 50 );if(window[‘gformInitDatepicker’]) {gformInitDatepicker();}if(window[‘gformInitPriceFields’]) {gformInitPriceFields();}var current_page = jQuery(‘#gform_source_page_number_5’).val();gformInitSpinner( 5, ‘https://www.renonation.sg/wp-content/plugins/gravityforms/images/spinner.svg’ );jQuery(document).trigger(‘gform_page_loaded’, [5, current_page]);window[‘gf_submitting_5’] = false;}else if(!is_redirect){var confirmation_content = jQuery(this).contents().find(‘.GF_AJAX_POSTBACK’).html();if(!confirmation_content){confirmation_content = contents;}setTimeout(function(){jQuery(‘#gform_wrapper_5’).replaceWith(confirmation_content);jQuery(document).scrollTop(jQuery(‘#gf_5’).offset().top – mt);jQuery(document).trigger(‘gform_confirmation_loaded’, [5]);window[‘gf_submitting_5’] = false;wp.a11y.speak(jQuery(‘#gform_confirmation_message_5’).text());}, 50);}else{jQuery(‘#gform_5’).append(contents);if(window[‘gformRedirect’]) {gformRedirect();}}jQuery(document).trigger(‘gform_post_render’, [5, current_page]);} );} );>

Did you miss our previous article…
https://www.amazingsidingstl.com/?p=444

Mary Wells

www.amazingsidingstl.com

7 Best Bolt Cutters [2021 Reviews]

August 11, 2021

Mary Wells

Home Renovation No Comments

Featured Image: Outlet Shops

Bolt cutters are very useful. A bolt cutter, contrary to its name, does not have to be used only for cutting through bolts; it is a multi-purpose tool that may be utilized in a variety of circumstances. Power tools, on the other hand, are just as fast and need less effort to use. But consider the issue of safety. Power tools are often much too aggressive, and even a little mishap may have severe consequences. Don’t forget that they’re worthless without a source of power. That is why you should get a quality pair of bolt cutters.

Of course, they’re excellent for cutting bolts, as the name suggests. This is a fantastic function for a variety of occasions. The strong jaws, on the other hand, may be used for a range of tasks, including cutting solid core wire, metal shelving, & even steel straps used to hold cargo on pallets. Whatever you want to do with your bolt cutter, make sure you choose one with excellent grips that provide control and leverage. Bolt cutters are also required to make difficult cutting tasks simple.

.fusion-fullwidth.fusion-builder-row-1 { overflow:visible; }1.>Sale

TEKTON 36 Inch Bolt Cutter | 3421 Drop forged hardened alloy steel jawsCompound cutting action requires less effortTubular steel handles with cushioned non-slip rubber gripsCuts bolts, chain, threaded rod, and more up to 1/2 in. diameterCheck Price Below

Buy on Amazon>

2.>Sale

KNIPEX – 71 01 200 Tools – CoBolt Compact Bolt Cutter (7101200), 8-Inch Precision Grade Performance ToolsThe Number 1 Choice Of Tradesman WorldwideComfortable In Use And Quality Assured DesignFit To Match The Needs In The Shop, At Home Or In The Service FieldEach Tool Is Proven And Tested For Durability And Function In Real World Use And ConditionsCheck Price Below

Buy on Amazon>

3.>

WORKPRO W017007A Bolt Cutter, Bi-Material Handle with Soft Rubber Grip, 30″, Chrome Molybdenum Steel Blade Drop forged chrome molybdenum steel and powder coated jaws for sure, efficient cutting and long lifeClassic lever-fulcrum design and precisely aligned blades deliver added leverage with less effortErgonomic bi-material Anti-slip grips provide greater control and comfort in cuttingCutting Capacity: HRC≤42: 25/64-inch(10mm Maximum)；HRCIdeal for cutting soft metal, bolts, rods, rivets and chainCheck Price Below

Buy on Amazon>

4.>

Neiko 00563A Heavy Duty Bolt Cutter, 36-Inch, Chrome Molybdenum Steel Blade CHROME MOLY STEEL: 36-inch premium Cr-Mo steel jaws cut through harder objects than chrome vanadium steel bolt cuttersDURABLE BLADES: High-frequency, heat treated blades resist damage and dents in tough applicationsMORE POWER, LESS EFFORT: Classic lever-fulcrum design and precisely aligned blades deliver added leverage with less effortERGONOMICAL HANDLES: Angled non-slip plastic, textured grips provide greater control and comfort in cuttingHEAVY DUTY: Cuts the toughest bolts, chains, padlocks, threaded rods, wires and many other metalsCheck Price Below

Buy on Amazon>

5.>

Olympia Tools Power Grip Bolt Cutter, 39-14, 42 Inches (39-142) BOLT CUTTER: The heat-treated & drop-forged alloy steel jaws are ideal for cutting hard & soft metals with ease. The 42-inch long handles & compound hinges help maximize leverage & cutting force.HIGH QUALITY: Patented folding handles allow bolt cutters to easily fit in a bag. Ergonomic comfort grips and heavy-duty cutting strength. Extra-wide handles significantly reduce pressure on the hands.MADE TO LAST: Our durable and long-lasting tools help you with home, garage & industrial projects. With professional-grade quality, easily repair & fix issues with our tool cabinet essentials.THE RIGHT TOOL FOR THE JOB: We engineer a range of bolt cutters, clamps, chisels, folding carts, hammers, pliers, saws, screwdrivers, tape measures, utility knives, vises, bolt cutters, saws & wrenches.SUPERIOR INSTRUMENTS: Olympia Tools provides quality & innovative hand & specialty tools, tool accessories & outdoor equipment for construction, woodworking, mechanical maintenance & home repair.Check Price Below

Buy on Amazon>

6.>Sale

GreatNeck BC36 36 Inch Bolt Cutters | Cuts Bolt, Nails, Locks, Rivets, Chains, & Wire | 1/2 Inch Jaw Capacity | Forged S2 Steel Construction for Durability & Powerful Cutting Edge | Orange Body DURABLE MATERIALS: These wire cutters have forged S2 steel construction for maximum cutting powerCUTS THROUGH ANYTHING: Whether it’s chain, bolts, wires, rods, and more, these cutters can get the job donePROTECTED BY: If something happens to your bolt cutters during normal, everyday use, then it should be covered by the GreatNeck Limited Lifetime warranty. Read the product manual for warranty conditions and restrictionsCOMFORTABLE GRIP: These heavy duty bolt cutters also have a comfortable, ergonomic grip handlesEASY IDENTIFICATION: These rod cutters have a vibrant orange body and the GreatNeck logo for easy identification in your massive tool collectionCheck Price Below

Buy on Amazon>

Ridgid and its bolt cutters are fairly expensive in comparison to most other types of bolt cutters on the market, but they still offer a fantastic heavy-duty choice.

The Ridgid 14288 bolt cutter is a premium choice with a respectable size of 31 inches that provides a good mix of leverage and mobility. It’s a fantastic heavy-duty choice since it has a cutting capability of 1/2 inch.

.fusion-content-boxes-7 .fusion-content-box-hover .heading-link:hover .icon i.circle-yes,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-box:hover .heading-link .icon i.circle-yes,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-link-icon-hover .heading .icon i.circle-yes,
.fusion-content-boxes-7 .fusion-content-box-hover .link-area-box-hover .heading .icon i.circle-yes {
background-color: #65bc7b !important;
border-color: #65bc7b !important;>

dvantages Of Bolt Cutters

Quick and to the point. Have you ever had trouble cutting through a rusty or heavy lock? A lock cutter can cut through almost any kind of lock, regardless of how long it’s been hanging on a gate, door, storage container, or other objects. You can swiftly and easily cut through locks, operating fast and effectively with minimal trouble or resistance. They can snap a lock-off in seconds by increasing the strain on it.

It’s very safe to use. Power tools that claim to be able to break locks may put you at grave risk. Although they seem to be strong and quick-working alternatives to bolt cutters, they may be more difficult to manage and less effective. They also have the potential to send components flying or cause errors. Bolt cutters, on the other hand, only cut what they can fit within their jaws. There is no recoil or bounce back and no components that might cut you or injure you in any way.

Removes the need for effort. To use a bolt cutter, you don’t require a lot of physical strength or individual effort. You can break even the toughest locks with only a little arm power and a smooth, quick stroke. The strength of a bolt cutter enables you to achieve more with less effort, making the difficult task of lock cutting simpler and less taxing. Mechanical power and pressure will be on your side.

It does not require any cleaning. If you’ve ever tried to cut a lock with a hand or power tool, you know how dirty the procedure can be. Before the work is officially done, these tools leave behind shavings and a plethora of little bits and pieces to clean up. Bolt cutters, on the other hand, leave no trace. They just break a lock at a certain point, leaving you with nothing but the lock to deal with.

Kinds Of Bolt Cutters

Traditional

Traditional bolt cutters have all of the design features you’d expect to see. They don’t have any design features that they don’t require, yet they nevertheless get the job done. This category takes up the majority of our list. Even tiny or compact versions fit into this category since they have the same design but are smaller.

Foldable

Bolt cutters may be difficult to store. Therefore, some versions come with folding handles. To reduce their total length, the handles fold upward onto the jaws. Although they are broader, as a result, they are still small enough to fit in most toolboxes and backpacks. Because the handles are mainly solid materials, the integrity is only minimally compromised. The only exception is a space between them that enables them to fold. Folding bolt cutters are great if you need this functionality.

Extendable

Bolt cutters with extended handles are available, but none are on our list. For usage in confined areas, the handles may be left at their smallest length since they are considerably simpler to manage in this form. The handles, on the other hand, maybe lengthened to improve the mechanical advantage. The main issue with this design is that they may lack structural strength since the handles are hollow.

Characteristics Of Bolt Cutters

Highly Durable & High-Strength

If you want to purchase the best bolt cutters, make sure you choose a device that is high-strength and designed to last. Bolt cutters depend on force to function properly and efficiently, so if yours can’t take a lot of force or fail when confronted with powerful locks, they won’t be able to fulfill your requirements. From the cutting jaws to the grips, look for a bolt cutter that is constructed of sturdy materials.

Weight And Size

Bolt cutters are available in a variety of sizes and weights. And these two characteristics may make one bolt cutter more suitable for your requirements than others. When it comes to size, the handle length is important to consider. Longer handles (or arms) equal greater leverage. Thus, a bolt cutter with a 24-inch handle will provide more force than one with an 18-inch handle. Bolt cutters with longer handles can cut through tougher materials and metals. The larger and more difficult the locks you’ll be dealing with, the larger your bolt cutter will need to be.

A bolt cutter’s weight also affects its mobility and may affect its force. Bolt cutters that are lightweight are simpler to use and carry with you at all times. For extra-tough locks, however, stronger bolt cutters are the best option. Bolt cutters may weigh as little as two pounds or as much as eight pounds or more.

Opening Of The Jaw

This is a characteristic that you must not overlook. The bolt cutter’s jaw opening has a direct impact on how and what it may be used for. It can only operate on thinner locks if the opening is narrow or tiny. You’ll have greater flexibility if the opening is fairly large. Bolt cutters have a 5/16-inch jaw opening as standard. Anything smaller will work better for cutting wire or thin metal sheets. However, if you’re dealing with extra-tough locks, you may need a bigger opening.

Other Things to Think About

Grips that are easy to hold. The design of the grip is critical to the operation. Because you’ll be applying a lot of force, you’ll want something that’s both comfortable in your palm and easy to grasp onto. While it shouldn’t be the primary consideration when choosing a bolt cutter, it is something to keep in mind.

Design that can be folded. If you must carry bolt cutters in a tool bag, you should get a set made specifically for that purpose. This is particularly true if you anticipate the need for longer handles to gain a mechanical advantage. Because this isn’t a common design element, you’ll have to look for sets that include it explicitly.

Blade that can be adjusted. The blade of most bolt cutters may be adjusted. You may fine-tune performance by setting the appropriate cutting depth with this adjustment. This modification may be done in a variety of ways, so pay attention to how it’s done. You want to make sure the process is both simple to use and produces consistent outcomes.

Angle or Cutting Style. If you believe that all bolt cutters cut the same way, it’s time to take a closer look at the ones you’re considering purchasing. Various cut styles, or angles, are used by bolt cutters, resulting in different end outcomes. Bolt cutters come in angled, shear, clipper, and center cut styles. Each of these cuts has an impact on how your bolt cutter is positioned, how much pressure is given to one spot, and how the jaws open.

Hydraulic or hand-powered options are available. The majority of bolt cutters are driven only by the force exerted by the user via the handles. You may, however, use a hydraulic bolt cutter if you want. A hydraulic piston drives the cutting blades of these tools, which are powered by a motor. The blades are moved with greater force by the piston, which is more than hand- and handle-operated bolt cutters can provide. If you’re attempting to cut through thicker locks, hydraulic bolt cutters come in handy.

Conclusion:

The TEKTON Bolt Cutter is the clear winner.

The compound hinge delivery mechanism drives the drop-forged and hardened alloy steel jaws, which produce a powerful punch.

While there is no exact poundage information on these cutters, the results speak for themselves.

The cutting head carries almost all of the weight, and you’ll find yourself cutting through a variety of heavy-duty materials with hardly a squeak from the Tektons.

Furthermore, under pressure, the robust, high-leverage tubular steel handles will not twist or yield.

The degree of comfort is just what you’d expect. The soft rubber grips provide excellent control and are comfortable to hold.

The jaws are also interchangeable and adjustable.

To view our Amazon Associates Disclaimer, please click here.

The post 7 Best Bolt Cutters [2021 Reviews] appeared first on Luxury Home Remodeling | Sebring Design Build.

Did you miss our previous article…
https://www.amazingsidingstl.com/?p=434

Mary Wells

www.amazingsidingstl.com

7 Cosiest Singapore Homes in Neutral Colours

August 11, 2021

Mary Wells

Home Renovation No Comments

Who doesn’t want a cosy home? And there’s no easier way to get the warm fuzzies than with soothing, neutral colours. Think light wood tones, warm white shades and natural materials like linen and rattan. Renovated recently, these homes in Singapore are some of the cosiest out there. Feel the calm and embrace the warmth as you enter these comfort zones:

1. Wooden screens and many other things

This home’s theme? Adaptability. Wood-framed screens are used to demarcate the different spaces. Some are sliding, which opens up a million different possibilities in the use of the space when they are left opened. Others are fixed in place to function as a privacy screen as much as a design element.

Still others are combined with glass panels so light still gets to filter through. While the wooden screen for the bedroom is lined with cream laminates to look just like shoji, a Japanese paper screen. It provides enough privacy, while still allowing the space to feel light and airy.

Design: Chalk Architects

2. Contrasting dark and light

Rather than go with a single wood tone, this BTO at Dawson decides to juxtapose light and dark wood shades. It creates a lovely visual contrast, without taking away the warmth of the space. To create a splash of modernity, terrazzo elements (seen in the home bar and foyer) were added to the space.

The bedroom features a darker, subdued palette, in contrast with the communal spaces’ lighter, medium-toned woods. Lines from the carpentry and furniture are kept simple, with gentle curves accentuating the Zen-like atmosphere.

Design: Parenthesis Studio

3. Embracing the Scandinavian design

We never tire of the Scandinavian style, especially if it’s done on point like in this resale apartment. Like with many Scandinavian themed homes, it adopted a white and wood scheme with the use of light grey accents and patterns to enliven things up.

An open plan creates an easy breezy vibe, which is further boosted by the generous amount of windows lining across the living and dining spaces. A large, hardworking island is the entirety of the kitchen, as it packs a sink, an induction cooker, storage and a recessed legroom for a couple of counter chairs.

Design: In-Expat

4. Curve intentions

There are perhaps more curves than lines in this flat. You see them in the doors/doorways, furnishings, the carpentry work and even at the edges of columns and ceiling beams. They present a quirky vibe, while offering a gentler, more soothing milieu. We can definitely get on board with this.

Most of the home is decked out in non-standard neutrals, with blush, taupe and navy blue functioning as such. Only the common bathroom ceiling sees a burst of dark red, which almost feels like a dare but works exceptionally well in that small space.

Design: Three-D Conceptwerke

5. So much wood

Much of this condominium apartment features wood tones, whether crafted from real wood or wood-lookalikes. Walls and entrances are covered in wood laminates, while wooden furnishings and furniture were used. Even the bathroom is clad in wood grain tiles. It creates a visual simplicity, lending a sense of calm and uniformity to the space.

The use of wood also brings in a sense of the outdoors—and with it a sense of serenity—which is further enhanced through the use of plants, natural materials like rattan and the cement screed, stone-like TV wall.

Design: Hock Hoon

6. Myriad textures and nuances

Warm hues pop against a black-and-white setting in this eclectic flat that features a colonial slant juxtaposed with modern Mid-century elements. The use of rattan, in keeping with the theme, also invites a sense of cosiness to the space.

The highlight of the home has to be the home bar that takes centre stage in the living room. Above, a ceiling-hung rack provides room for plants and storage for liqueurs and spirits.

Design: Fifth Avenue Interior

7. All framed up

Our final home features a clean and bright palette with a whitewashed base accented with grey-hued woods. Another Scandinavian design done right. A chevron-patterned backsplash—a classic Nordic motif—stands out against the large, eat-in white kitchen.

Black-framed prints and photos adorn the walls, mirroring the eye-catching black-framed glass divider that segregates the dining area from the rest of the home. The curved elements seemingly hug the eating space, creating a cosy gathering spot for friends and family.

Design: Lemonfridge Studio

My Property

Project Info

My Contact Details

AgreementI acknowledge that the details provided in this form will be shared with Renonation.sg and the recommended interior design firms.AgreementI wish to receive home renovation inspiration, tips and guides from Renonation.sgPhoneThis field is for validation purposes and should be left unchanged.
gform.initializeOnLoaded( function() {gformInitSpinner( 5, ‘https://www.renonation.sg/wp-content/plugins/gravityforms/images/spinner.svg’ );jQuery(‘#gform_ajax_frame_5’).on(‘load’,function(){var contents = jQuery(this).contents().find(‘*’).html();var is_postback = contents.indexOf(‘GF_AJAX_POSTBACK’) >= 0;if(!is_postback){return;}var form_content = jQuery(this).contents().find(‘#gform_wrapper_5’);var is_confirmation = jQuery(this).contents().find(‘#gform_confirmation_wrapper_5’).length > 0;var is_redirect = contents.indexOf(‘gformRedirect(){‘) >= 0;var is_form = form_content.length > 0 && ! is_redirect && ! is_confirmation;var mt = parseInt(jQuery(‘html’).css(‘margin-top’), 10) + parseInt(jQuery(‘body’).css(‘margin-top’), 10) + 100;if(is_form){jQuery(‘#gform_wrapper_5’).html(form_content.html());if(form_content.hasClass(‘gform_validation_error’)){jQuery(‘#gform_wrapper_5’).addClass(‘gform_validation_error’);} else {jQuery(‘#gform_wrapper_5’).removeClass(‘gform_validation_error’);}setTimeout( function() { /* delay the scroll by 50 milliseconds to fix a bug in chrome */ jQuery(document).scrollTop(jQuery(‘#gform_wrapper_5’).offset().top – mt); }, 50 );if(window[‘gformInitDatepicker’]) {gformInitDatepicker();}if(window[‘gformInitPriceFields’]) {gformInitPriceFields();}var current_page = jQuery(‘#gform_source_page_number_5’).val();gformInitSpinner( 5, ‘https://www.renonation.sg/wp-content/plugins/gravityforms/images/spinner.svg’ );jQuery(document).trigger(‘gform_page_loaded’, [5, current_page]);window[‘gf_submitting_5’] = false;}else if(!is_redirect){var confirmation_content = jQuery(this).contents().find(‘.GF_AJAX_POSTBACK’).html();if(!confirmation_content){confirmation_content = contents;}setTimeout(function(){jQuery(‘#gform_wrapper_5’).replaceWith(confirmation_content);jQuery(document).scrollTop(jQuery(‘#gf_5’).offset().top – mt);jQuery(document).trigger(‘gform_confirmation_loaded’, [5]);window[‘gf_submitting_5’] = false;wp.a11y.speak(jQuery(‘#gform_confirmation_message_5’).text());}, 50);}else{jQuery(‘#gform_5’).append(contents);if(window[‘gformRedirect’]) {gformRedirect();}}jQuery(document).trigger(‘gform_post_render’, [5, current_page]);} );} );>

Did you miss our previous article…
https://www.amazingsidingstl.com/?p=365

Mary Wells

www.amazingsidingstl.com

Why I Regret Not Getting a Full Smart Home System (Review)

August 6, 2021

Mary Wells

Home Improvement No Comments

The exponential growth of the smart home industry has transformed it into a multi-billion dollar business since the early 2000s, and more so with the current stay-home restrictions. Smart home systems will not be complete without a competent and fluid mobile app that allows you to control whenever and wherever you are. But with so many different brands available, including OEMs, which system is the best for you?

I had a first-hand experience of integrating smart home systems into my home. Sadly, not for the entire house but for a part of it. Not that I didn’t want to, but it was too late. Here, I share my journey on using Schneider Electric’s (SE) Wiser Smart Home System and why I regretted integrating only a part of it into my home.

Bloody hell, a wrong move

Never underestimate a good planning for your home’s electric points. Decide early which switch/socket is for which lights/appliances, and where the placement will be. Spend hours or even days reviewing the plans based on your family’s lifestyle. This is extremely important.

Personally, I spent around two hours with my electrician and designer to plot the placements and the type of switches and sockets with the number of switch gangs. But unfortunately, that was still insufficient as I didn’t include my plans to integrate a smart home system! At this point, I could only adapt Schneider Electric Wiser Smart Switches on a single wall.

Why? Because these smart switches require neutral wire connection and that particular wall that I have is neutral wire-ready, pulled from the water heater connection. I’ve only gotten my home fully renovated four months ago, and I will not have the mess of pulling neutral wires across other areas of home just to install the switches.

So please, if you have a new place and intend to integrate a smart home system, have it well planned and installed before moving in if possible. Can you have external electric trunking with the neutral wire pulled across the home? Yes, you can, but that will be ugly!

Wall before installation of Smart Switch

hub for everything… almost.

To have a basic decent smart home set up using Schneider Electric’s Wiser system, these were the items needed:

1 x Wiser Hub (The Main Brain): I was expecting a bulky outlook as this is their main “character”, but it is just the size of my palm which can be hidden nicely behind the DB box. This controls all the various parts (listed below) and other Wiser peripherals, linking all of them with the Wiser App (iOS or Android).

Wiser Hub

1 x IR Converter (Connector to 3rd parties): Air conditioners, TV and sound systems can be connected using this IR Converter. But they may not include your latest models in their default list. For instance, my Sonos Arc or OLED LG 65” TV wasn’t included in their list. Thankfully, my Daikin air-con is still compatible. Given their company’s scale, they should include them and newer products in the near future.

IR Converter

Also to my surprise, using the Wiser App to control my Daikin air-con responds much faster than Daikin’s own app. I’ve got to say Daikin’s mobile control app is quite poor, with the persistent circular loading icon taking a lot of time.

Daikin App vs Wiser App

The IR Converter itself has got to be within range of the 3rd party product to function well, which spans around 8 metres. But the distance between them has to be clear from walls or any panels.

1 x 2G Wiser Smart Switch or 3G Wise Smart Switch: So the number of gangs per switch depends on how you want to categorise your switches. Meaning: the 3 x lights in the living room can all be in a 3G switch, and 2 x fans to be in 2G. If you want more than that, then just add in more switches. Side note: I personally love their smart switches over their AvatarOn switches which I also got, because of 2 useful features:

2G Smart Switch & 3G Smart Switch

1. There is an option of white or blue locator lights, which are very effective in pure darkness as you will be able to see whether your switches are off or on. With the locator light on means that the switch is off and vice versa when without light. These lights help you locate the switches when it’s dark. You will need time to get used to this though.

Changeable Colours

2. The switch has a nice and soft clicking sound. The touch compression of it is also brilliant. Unlike their AvatarOn, which has a clicking sound that can be obvious during the quiet night.

Smart Switch vs AvatarOn

1 x Freelocate (Remote control): This switch that acts as a remote control allows you to have four different themes (they call them ‘Moment’). It comes with several mini picture plates that you fix onto the Freelocate to help you indicate the purpose of each switch—Cute, but they could have included more than one of each kind.

Controlling the different switches at home by theme gives you endless possibilities. Here are some ideas to try out for your home:

Entertainment Room Theme: With a single press of a button on the Freelocate, you can dim your lights, turn on the TV and air-conditioner, and draw your black-out curtains to a close, creating a movie theatre ambience.

Bedtime Stories Theme: Turn off your living room lights, while switching on the bedroom lights and air conditioner. All ready for your kids to jump into bed with their books.

You are also not restricted to just themes. If you have appliances or switches that are not within the same walls, you can also use the Freelocate to have the distanced switches turned on. That is what I did exactly for my small experimental wall.

Picture plates for the Free Locate

Freelocate

The Wiser app is nothing short of impressive. Launching time is extremely fast which is the most important factor for a smart home app. Three key pages: The Home Page with all your short-cuts and products, editable and removable. The Moment & Automation Page to create themes and auto-activation of products. And Alarm & Message Page to keep you informed of the happenings of your products and if there are any updates.

The learning curve of the app is relatively easy. You just need to know that with The Brain (Wiser Hub), you can pair it to all other products and have full control of them, from naming the individual switch to setting on/off timings. It is almost fully customisable.

Outstanding Responsiveness of Wiser App

Pairing of Smart Switch

My small home setting

As I mentioned, I only had a tiny wall to play around due to the late implementation. Let me share how I used this product to better my lifestyle.

My Floor Plan

I swapped out the normal switches and placed in two Wiser smart switches for 2 x Living Room Fans, 2 x Dining Lights and 1 x Foyer Light. The reason why I didn’t have these switches over at the main door in the first place was because I didn’t want too many switches attached to the wall beside my main door. Before I switched to the smart switches, there were times when I was all ready to go out and was walking to the main door only to walk back to this wall to turn off all the switches when I realised I forgot to.

Just by swapping out to the smart switches, I can now control my lights and fans using the Freelocate which is now attached on the wall beside the main door (or Wiser App). As mentioned earlier, pre-programmed themes allow me to either off/on all the lights, off/on both ceiling fans and on/off both the lights and fan, as long as they are under the smart switches. So now, whether I am heading out or coming back home, all living and dining switches can be controlled with a single press of a button.

If your home is really that big, you can have more than one Freelocate and place them anywhere you want. And it is also magnetically detachable that acts just like a mobile remote controller. Freelocate buttons can be assigned via the Wiser app, so it is not permanent and a single theme can be assigned to more than one Free Locate device.

Free Locate

Siri capability reaches another level

I’ve embedded the on/off functions of my air-con and all other smart switches into a single theme. So when there are guests coming over, all I need to do is to call out to Siri and say: It’s Party Time!

Siri is also super useful by using Apple’s Shortcut App to execute the themes, which can also be commanded by using the Apple Watch.

I really loveeee using Siri for these functions as it is the most convenient and laziest way that I can interact with my products since my mobile phone is always with me and the controls can also be done remotely. For example, I can switch on my fans if there is no one in the living room, or turn on the lights in the living room first for my kids since they are afraid of the dark. Check out my video below for my customised “It’s Party Time!”

Alexa and Google Assistant support are also provided for Wiser Home Systems.

Apple Shortcut App

Hey Siri It’s Party Time!

My slight regret

Yes, it is so much fun to customise and fiddle around with Schneider Electric’s Smart Home System. This is why I regretted not knowing their products earlier, and not conveying that to my designers in the pre-renovation stage. I hope my personal experience here gives you an idea of what steps are needed.

If those were planned earlier, I could have even more products implemented. These could include my lights dimmer and curtain switches, and their switch adaptors could have been used instead of other third party products I bought.

Other Compatible Products

Who needs a smart home system?

“Is it really hard for you to walk over to that switch? Got so lazy meh?” I got this from my wife when she knew I wanted to have this system in place. It’s not totally wrong coming from her.. haha!

A smart home system is never a need for anyone, and neither is a smartphone necessary for all. But personally, I always feel that convenience is a privilege to have if you can afford it. Like it is also our privilege to have delivery riders conveniently placing our food at the doorstep, just through an order on our mobile app. Convenience is an understated factor which many of us really wish to have deep in our hearts, but not really admitting it.

If you have different areas of your home serving different purposes or having multiple electronic products for different purposes, then a smart home system will definitely benefit you and your family.

1 click – all lights are gone, curtains open

1 click – blinds closed, air-cons on

1 click – ceiling lights off, ambient light on, air-con on, movie time

These are just some simple examples, but the possibilities are endless. Having it catered just to your lifestyle and use is why you will want a smart home system. Here’s a link to what Wiser Systems can do for you.

Is it expensive to do?

For what I did at my house, it cost around $1,870 for the Wiser Home Package. For a start, you do not need to go for this as I believe they have a cheaper option. If you need a good value package, just let me know and email to [email protected]. We will try to arrange it directly for you.

For a full house implementation, it may cost within a range of $3,000 – $4,000 for a standard 4brm apartment, or $5,000 – $8,000 for a slightly bigger double-storey house. Depends on your appetite really. Perhaps a good way to start is to implement it on some parts of your home and have your electrician pull the neutral wire to other areas as well. This is just in case you want to have it done in more areas in the future, hacking wouldn’t be necessary.

Things to improve on

While I am writing this last bit, I felt that the Wiser Home Systems is almost perfect. Especially impressed with the super-responsive mobile app and its compatibility with Siri.

There isn’t a smart hub that is able to connect to every single third party product, and I doubt there will be any due to complexity incompatibility and security. If there is a way, it will be great. If not, I just wish that they would more varieties of smart home products to allow a completely one-hub controlled home.

I also hope that there is a function to ‘share’ the Wiser App account with another user (your spouse), but from my meddling, it seems to be limited to only one main user for now.

This is also not the cheapest smart home system available. There is a handful that is much cheaper and easier to find on e-commerce sites. And also I believe some that do not require neutral wire connections (but with some risks). I’m hoping it to be cheaper, but I think with an established name in Schneider Electric (Listed MNC), utilisation of ZigBee network, a capable mobile app, and proper customer service provided, the money spent was well worth it.

My Property

Project Info

My Contact Details

AgreementI acknowledge that the details provided in this form will be shared with Renonation.sg and the recommended interior design firms.AgreementI wish to receive home renovation inspiration, tips and guides from Renonation.sgEmailThis field is for validation purposes and should be left unchanged.
gform.initializeOnLoaded( function() {gformInitSpinner( 5, ‘https://www.renonation.sg/wp-content/plugins/gravityforms/images/spinner.svg’ );jQuery(‘#gform_ajax_frame_5’).on(‘load’,function(){var contents = jQuery(this).contents().find(‘*’).html();var is_postback = contents.indexOf(‘GF_AJAX_POSTBACK’) >= 0;if(!is_postback){return;}var form_content = jQuery(this).contents().find(‘#gform_wrapper_5’);var is_confirmation = jQuery(this).contents().find(‘#gform_confirmation_wrapper_5’).length > 0;var is_redirect = contents.indexOf(‘gformRedirect(){‘) >= 0;var is_form = form_content.length > 0 && ! is_redirect && ! is_confirmation;var mt = parseInt(jQuery(‘html’).css(‘margin-top’), 10) + parseInt(jQuery(‘body’).css(‘margin-top’), 10) + 100;if(is_form){jQuery(‘#gform_wrapper_5’).html(form_content.html());if(form_content.hasClass(‘gform_validation_error’)){jQuery(‘#gform_wrapper_5’).addClass(‘gform_validation_error’);} else {jQuery(‘#gform_wrapper_5’).removeClass(‘gform_validation_error’);}setTimeout( function() { /* delay the scroll by 50 milliseconds to fix a bug in chrome */ jQuery(document).scrollTop(jQuery(‘#gform_wrapper_5’).offset().top – mt); }, 50 );if(window[‘gformInitDatepicker’]) {gformInitDatepicker();}if(window[‘gformInitPriceFields’]) {gformInitPriceFields();}var current_page = jQuery(‘#gform_source_page_number_5’).val();gformInitSpinner( 5, ‘https://www.renonation.sg/wp-content/plugins/gravityforms/images/spinner.svg’ );jQuery(document).trigger(‘gform_page_loaded’, [5, current_page]);window[‘gf_submitting_5’] = false;}else if(!is_redirect){var confirmation_content = jQuery(this).contents().find(‘.GF_AJAX_POSTBACK’).html();if(!confirmation_content){confirmation_content = contents;}setTimeout(function(){jQuery(‘#gform_wrapper_5’).replaceWith(confirmation_content);jQuery(document).scrollTop(jQuery(‘#gf_5’).offset().top – mt);jQuery(document).trigger(‘gform_confirmation_loaded’, [5]);window[‘gf_submitting_5’] = false;wp.a11y.speak(jQuery(‘#gform_confirmation_message_5’).text());}, 50);}else{jQuery(‘#gform_5’).append(contents);if(window[‘gformRedirect’]) {gformRedirect();}}jQuery(document).trigger(‘gform_post_render’, [5, current_page]);} );} );>

Did you miss our previous article…
https://www.amazingsidingstl.com/?p=333

Mary Wells

www.amazingsidingstl.com

7 Best Cordless Power Tool Combo Kits [2021 Reviews]

August 5, 2021

Mary Wells

Home Design No Comments

Featured Image: The Tool Scout

Consider getting a complete set of tools rather than purchasing each item separately when you need new equipment. Not only will purchasing a set save you money over buying each item separately, but you’ll also get tools you may not have considered otherwise.

Below are the best cordless power tool combo kits for 2021, along with a buying guide. We hope you find this post helpful in choosing the perfect set for your needs.

.fusion-fullwidth.fusion-builder-row-1 { overflow:visible; }1.>

Ryobi P883 One+ 18V Lithium Ion Cordless Contractor’s Kit (8 Pieces: 1 x P704 Worklight, 1 x P515 Reciprocating Saw, 1 x Circular Saw, 1 x P271 Drill / Driver, 2 x Batteries, 1 x Charger, 1 x Bag) CIRCULAR SAW: This cordless circular saw contains plenty of features that will keep you cutting true. It has a side handle and rubber overmold to improve grip, even in slippery conditionsP271 POWER DRILL: This 1/2 inch chuck drill / driver comes equipped with a magnetic tray for bits and fasteners, a 24 position adjustable clutch, and convenient tool-less bit changingP515 RECIPROCATING SAW: An anti-vibration handle, rubber overgrip, variable speed trigger, and easy blade removal latch are only some of the features that keep this tool at one of the top sawzalls in the DIY and professional marketONE+ COMPATIBLE: This kit includes two P102 batteris and one P118 charger. These batteries are compatible with over 50 tools in Ryobi’s One+ family. These tools are compatible with several Ryobi 18V batteries, including the P100, P102, P103, P104, P105, P107, and P1082 Batteries, Charger, Tool Bag, Drill, Circular Saw, Work Light, Reciprocating SawSTORAGE: Keep all of the items in this kit snugly together in the included wide-mouthed contractor’s bag. Its sturdy fabric will keep your tools protected while the cross-x stitching on the dual handles will allow you to lug this almost anywhereCheck Price Below

Buy on Amazon>

2.>

SKIL 20V 4-Tool Combo Kit: 20V Cordless Drill Driver, Reciprocating Saw, Circular Saw and Spotlight, Includes Two 2.0Ah Lithium Batteries and One Charger – CB739701 4-TOOL KIT – Includes 20V Cordless Drill Driver, Reciprocating Saw, Circular Saw and LED Spotlight. Includes two PWRCore 20 2.0Ah Lithium Batteries and one 20V Charger.EVERYTHING YOU NEED TO DIY – Whether you’re a beginning DIYer or a power tool pro, this 4-tool combo kit has you covered for any job, big or small.LONGER RUN TIME & BATTERY LIFE – The PWRCore 20 Lithium battery has an innovative temperature management system to keep the battery cool and powering on through your project.HIGH,LOW SPEED CONTROL – Get more torque with the drill driver low speed setting, or get the job done fast with the high speed setting.More confident cuts – The saw line visor helps keep the cut straight.Check Price Below

Buy on Amazon>

3.>

DEWALT 20V Max Cordless Drill Combo Kit, 10-Tool (DCK1020D2) DCD771 in the cordless drill combo kit has a high speed transmission that delivers two speeds (0-450 & 1,500 rpm) for a range of fastening and drilling applicationsDCF885 in the cordless tools combo kit offers 1-handed loading for its 1/4-inch hex chuck that accepts 1-inch bit tipsDCS381 with keyless blade clamp as one of the essential construction tools allows for quick blade change without touching blade or reciprocating shaft.DCL040 is a bright flashlight to illuminate your work area with LED output of 110 lumens.DCE100 has Max Air Flow of 100CFMCheck Price Below

Buy on Amazon>

4.>

BOSCH Power Tools Combo Kit CLPK22-120 – 12-Volt Cordless Tool Set (Drill/Driver and Impact Driver) with 2 Batteries, Charger and Case , Blue Power: This Bosch drill kit includes a powerful 12 volt drill driver with up to 1,300 RPM and a 12 volt driver with up to 2,600 RPMCompact: The lightweight design of the PS31-2A drill driver is ideal for easy handling in overhead operations and tight spaces and the PS41-2A impact, driver offers the precision of variable speed, a light-body, and a short-head lengthControl and visibility: The Bosch cordless drill is easy to handle in tight, narrow spaces, and three integrated LED lights mounted around the head of the driver enable high performance in low-light settingsDurability: Robust and compact with lightweight design, the drill impact driver combo kit is built to last and backed by a three year protection planConvenient: Drill kit includes: 12V Max 3/8 inch drill driver (PS31-2A); 12V Max impact driver (PS41-2A); 2 batteries, 30 minute charger and soft carrying caseCheck Price Below

Buy on Amazon>

5.>

PORTER-CABLE PCCK6118 20V MAX Lithium Ion 8-Tool Combo Kit with PORTER-CABLE PCC771B Bluetooth Radio Performance: high performance motors and impact mechanisms to power through jobsErgonomic design: compact and convenient design to alleviate jobsite hasslesTwo high quality speakers with an equalizer featureBluetooth compatibility to stream music from any smart deviceCheck Price Below

Buy on Amazon>

6.>

Makita CT226 12V Max CXT Lithium-Ion Cordless Combo Kit with 70-Piece Impact Drill-Driver Bit Set 3/8″ Driver-Drill with 2-speeds (0-450 & 0-1,700 RPM) delivers up to 250 in.lbs. of Max Torque3/8″ Driver-Drill features a compact design at only 7-7/16″ long and weighs only 2.8 lbs. with battery for reduced operator fatigueImpact Driver with variable speed (0-2,600 RPM & 0-2,400 IPM) delivers up to 970 in.lbs. of Max TorqueProfessional quality 70-piece bit setBlack oxide coating to resist corrosionCheck Price Below

Buy on Amazon>

7.>Sale

BLACK+DECKER 20V MAX Cordless Drill Combo Kit with POWERSERIES Extreme Cordless Stick Vacuum, Blue (BD4KITCDCRL & BSV2020G) Part of the black+decker 20V max* battery system and 2 batteries doubles the runtime for larger projects and less down timeDrill / Driver features an 11 position clutch with a LED work light to illuminate the work surface3X Cleaning system designed for multi-surface clean up, multi-debri pick up, and an anti-tangle brush barUpto 75% better pick up on carpet (compared to BLACK+DECKER HCUA525JP)Check Price Below

Buy on Amazon>

1. Ryobi P883 One+ 18V Lithium-Ion Cordless Kit

Pros:

Cross-platform battery compatibility Ergonomic gripAffordableAffordableVersatileDurable lithium-ion batteries

Cons:

The battery of the reciprocating saw drains quickly

Sebring Tip:

Sebring Tip:

Most cordless drills that are less expensive than this one are of such poor quality that you’ll either end up with a tool that isn’t up to the job or one that will fail soon. Or, even worse, it will be both weak and unreliable. While the Black+Decker LDX120C Cordless Drill we suggest is affordable, it isn’t a low-quality instrument.

Things To Consider When Buying Power Tool Combo Kits

Before purchasing a power tool set, make sure you understand the included equipment, power source, and other accessories to make sure you get one that meets your requirements.

Number of tools included

Some power tool sets come with just two tools, while others have up to ten. While having a set with a variety of cordless power tools is advantageous, it’s critical to match the supplied equipment to your intended use. If all you require is an electric screwdriver, circular saw, and reciprocating saw, search for a power tool set that includes just these instruments and as few extras as possible to save money.

Power source

There are two types of power tool sets: corded and cordless. Cordless sets provide more mobility as well as the ease of cross-tool compatibility. Cordless tool sets, on the other hand, have less power than corded tool sets and need more regular battery changes and charging.

Extra accessories

Consider the extra features offered by each power tool set before making your decision. Some power tool sets, for example, come with an extra battery, a carrying bag, or a limited guarantee on the equipment.

Power Tool Combo Kits And Their Features

There are many factors to think about when purchasing a tool set. The kind of tools included in the set should be the main factor in deciding whether or not to buy it. If the power tools set contains a tool you know you’ll never use, skip it and look for a better-suited bundle. When looking for power tool sets, take the pricing in consideration as well. Purchasing a combined tool set allows you to save money on commonly used tools.

It’s also important to think about how the tools are powered. Some sets include at least one battery that may be shared among the tools, while others may include more or none at all. Before you can utilize your new tools, you’ll need to find and buy your own batteries. To recharge batteries, you’ll also need a fixed or wall adapter.

In the construction industry, for the ordinary homeowner and do-it-yourselfer, cordless tools are quickly displacing corded counterparts. In the perspective of many individuals, the convenience of cordless tools more than compensates for their higher price, allowing them to justify their purchase. When you need to do a quick task, cordless equipment makes it much simpler.

These cordless power tool combo kits include a number of items from the same brand that all use the same power supply. Typically, the kits include two batteries and a charger, allowing for continuous operation depending on the recharge speed of the batteries. Because these instruments all utilize lithium-ion batteries, a partly charged battery may be removed from the charger and used without danger of harm.

Why Buy Power Tool Combo Kits?

There are a few benefits to purchasing these kinds of packages rather than purchasing individual equipment. To begin with, the kits offer many tools at a cheaper cost than if you purchased them separately, saving you money in the long run. The fact that you’re purchasing all of your tools for the same battery system saves you money a second time. This saves money on batteries and charges, particularly as compared to owning a collection of tools from several manufacturers.

At least one drill and two saws are included in each package. Circular and reciprocating saws are used. While you won’t be able to cut curves like you can with a scroll saw, it will suffice for the majority of building jobs. A scroll saw, as well as other equipment, are included in some of the bigger kits.

When looking at kits like these, it’s easy to get carried away and decide you need everything. But, before you go out & buy anything, consider the tasks you undertake and the equipment you’ll need for them. Meanwhile, you may find that some of the kit’s additions are the ones you use the most. Many cordless tool makers are now producing smaller impact drivers, which are ideal for driving screws into a deck or other jobs that need more torque than a standard drill/driver. These kits also include work lights, which are always never enough in anyone’s toolbox.

Other Considerations

When selecting a kit, take into account any cordless tools you already have. If you currently have some tools from a certain brand, adding more from that same manufacturer may provide you additional chargers and batteries for your tool collection. It’s worth buying consistently until there’s a compelling cause to switch brands.

Soft-sided cases are included in all of the packages for storing and transporting your tools. This is useful if you don’t have a lot of workshop space or simply want to take your tools to where you’re working on the project. These heavy-duty canvas bags are tough and won’t break under the weight of numerous instruments.

Finally, several manufacturers provide many combination kits. I’ve provided their finest cordless power tool combo kits for 2021 in this review, but you should check their sites to see if they have any smaller kits available.

The 4-tool combination kit, which includes a drill, impact driver, circular saw, and reciprocating saw, has become the cornerstone of most manufacturers’ “general contractor’s kit.” Before going on to more powerful drivers and tabletop saws, it covers the fundamentals of cutting, drilling, fastening, and demo work.

Conclusion:

If you’re searching for a kit to help you repair a few items around the home or if you require tools for a DIY project, the P883 will be a wonderful companion. For domestic usage, the instruments are robust, user-friendly, and very dependable. Ryobi seems to be confident and proud of its goods, as shown by the 3-year limited guarantee.

The kit’s price point is the most notable feature, but it’s not the only one. Ryobi is a force to be reckoned with in the power tool industry because of the many features that each unit offers. It’s really impressive that such a low-cost kit comes with a 3-year limited guarantee.

Ryobi is renowned for creating kits that are affordable for everyone. DIYers and users seeking equipment for simple around-the-house repairs love them because of their low costs, but professional contractors aren’t so fond of them. Because of their cordless capabilities, they may not be the ideal on-site companions.

However, when you consider the price you’re paying against the torque and usefulness you’re receiving, you’ll definitely see that you’re ahead. The majority of Ryobi tools are made to last and are ergonomically designed. They should last you for many years if you take good care of them.

To view our Amazon Associates Disclaimer, please click here.

The post 7 Best Cordless Power Tool Combo Kits [2021 Reviews] appeared first on Luxury Home Remodeling | Sebring Design Build.

Did you miss our previous article…
https://www.amazingsidingstl.com/?p=319

Mary Wells

www.amazingsidingstl.com

11 Cosy Dining Nooks that Won’t Make You Miss a Full Dining Set

August 4, 2021

Marylin Saldago

Home Improvement No Comments

Who needs a full-fledged dining set when you have these quaint and cosy dining nooks? These ideas work well with smaller households, in families that don’t do a lot of eating in, or if you just don’t have a lot of space to play with. From wall-mounted bar booths to slide-out countertops, you will definitely want to pull up a chair to these tables.

1. Couched behind

Positioned just behind the couch, this royal blue dining nook stands out from the neutral-hued space whilst mirroring the wall behind it. Fluted details lend interest. Pro tip: You’ll want to design this slightly raised so that there’s a visual difference between the living area and the dining spot.

Design: D’Marvel Scale

2. Flip it up

Narrow space? No problem. Consider this flip-up dining table that can be flipped back down after meals so that it takes up only the most minimal of spaces.

Design: Hoft Interior

3. Rounded end

Ooh, we really like this one. This round dining table joins together with the kitchen island at one of its corners. It helps to offset the edges and lines in the space, while minimising the footprint it takes up.

Design: Notion of W

4. Sleek and Slide

Extending out from the TV feature wall in the living room, this dining banquette comes with a sliding tabletop that is able to accommodate a more generous dining space when needed.

Design: Free Space Intent

5. A hint of nostalgia

If we could crush on dining nooks, this one will be on the top of our list with its emerald green seating, feature wall made up of mustard tiles and the fluted table stand. The colour scheme leans towards retro, but the silhouettes are definitely timeless enough.

Design: Monocot

6. Green spot

A burst of greenery peeks out from this wall-mounted bar table, lending a refreshing touch to this clean, contemporary space. The addition of the decals and the typography enhance this dining nook’s young and fun vibe.

Design: Wolf Woof

7. Option to swivel

Another savvy space-saving dining nook that can be swung out during mealtimes! Positioned within the TV feature, it’s a major bonus for folks who like having dinner in front of the telly.

Design: Hello Embryo

8. Glide away

With the ability to glide back and forth from the built-in storage piece it is attached to, this dining table offers more flexibility in terms of seating and the usage of space.

Design: D’Marvel Scale

9. Pull-out table

Pull out the sides of this kitchen peninsula to reveal a petite dining table just for two. And you don’t even need special counter-height dining chairs for it since the pull-out tabletop is designed at a lower height.

Design: Wolf Woof

10. By extension

The kitchen counter was extended all the way into the living room in this small condominium, accommodating an extra area for a cosy dining nook. Sliding panels underneath the dining counter offer storage for serving ware.

Design: Habit

11. Island life

To incorporate a casual dining spot and a home bar, the marble-grain kitchen island was combined with a wood tabletop. The amalgamation of the two materials not only lends visual interest, but also helps to contrast the functions of the space.

Design: Design Zage

Get the latest tips and join in the conversation at our Facebook!

Did you miss our previous article…
https://www.amazingsidingstl.com/?p=302

Marylin Saldago